More From Contributor

£419.49
The new Arai Quantum ST is the successor to the popular Quantum model. Aimed & developed for the large group of serious sport-touring ...
Archived Product
£362.18
The new Arai Quantum ST is the successor to the popular Quantum model. Aimed & developed for the large group of serious sport-touring ...
Archived Product
£546.46
QV-Pro: Optimized ventilation The high-performance ventila­tion system of the QV-PRO was developed to offer all day long comfort ...
Archived Product
£516.54
QV-Pro: Optimized ventilation The high-performance ventila­tion system of the QV-PRO was developed to offer all day long comfort to ...
Archived Product
£601.50
QV-Pro: Optimized ventilation The high-performance ventila­tion system of the QV-PRO was developed to offer all day long comfort to ...
Archived Product
£516.54
QV-Pro: Optimized ventilation The high-performance ventila­tion system of the QV-PRO was developed to offer all day long comfort to ...
Archived Product
£516.54
QV-Pro: Optimized ventilation The high-performance ventila­tion system of the QV-PRO was developed to offer all day long comfort to ...
Archived Product
£511.16
QV-Pro: Optimized ventilation The high-performance ventila­tion system of the QV-PRO was developed to offer all day long comfort to ...
Archived Product
£399.20
Arai Rebel
- the name says it all! There is a strong tendency within the motorcycle community towards simpler, more affordable
...
Archived Product
£355.47
Arai Rebel
- the name says it all! There is a strong tendency within the motorcycle community towards simpler, more affordable
...
Archived Product

Arai QV-Pro Honda Gold Wing, Integral Helmet

QV-Pro: Optimized ventilation The high-performance ventila­tion system of the QV-PRO was developed to offer all day long comfort to the rider. Large ducts and vents feature massive inlet and exhaust openings, while the large switches can be easily operated,
RIP - This product is no longer available on our network. It was last seen on 10.01.2024

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Motoin UK
  • SKU: 50233
Availability: In Stock
£639.14

Product Description

QV-Pro: Optimized ventilation The high-performance ventila­tion system of the QV-PRO was developed to offer all day long comfort to the rider. Large ducts & vents feature massive inlet & exhaust openings, while the large switches can be easily operated, even with thick gloves. It is this advanced ventilation system that makes the QV-PRO perfect for those long rides in every weather. Shell Construction PB-CLC Peripherally Belted Complex Laminate Construction Arai’s proprietary (super fibre belt) Peripheral Belt, borrowed from our F-1 technology, greatly increases shell strength & flexibility while maintaining low weight & a lower centre of gravity. Positioned across the top of the eye port, this band contributes to the use of a thinner EPS liner which greatly enhances the upward field of view. A specially designed “mechanically expanded fibre mat”, sandwiched between the inner & outer layers of Arai’s proprietary Super Fibre Laminates, is used to reinforce & bond these two Super Fibre layers without adding significant weight to the helmet. Variable Axis System (VAS) With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along & above the test line of the Snell standard. Ventilation: Free Flow System (FFS) Creates airflow under the helmet that reduces wind noise & turbulence while increasing the exhaust of hot air. Front Ventilation: Dual intake Designed for increased airflow & lower noise level, guiding fresh, cool air into the interior. Front Ventilation: Brow vents extended to temple area Fresh air can enter directly to the forehead area without the need for holes in this critical area of the shell & impact absorbing liner. For specific models the ventilation is extended to the temple area. Front Ventilation: Three position chin vent Three-position chin vent helps in demisting the visor & offering fresh, cool air to the rider. Rear Ventilation: Neck exhaust vent To enhance hot-air extraction from the interior. Increases the ventilation effect at the lower part of the helmet. Rear Ventilation: One-piece rear exhaust Extracts more hot air from the helmets interior & improves aerodynamics. Aerodynamics: Pull Down Chin Spoiler Helps minimize wind noise & also aids with the extraction of hot air from the face area. Provides additional deflection of road debris away from neck. Depending on the model the Chin Spoiler is retractable. Visor: VAS Max Vision Visor with De-Mist option VAS MAX Vision shield is standard to provide better visibility in all seasons & for all types of riding. Comes standard with Clear anti-fog Pinlock insert to be installed as needed. Visor: New shield latch system Borrowed from our F1 helmet, completely modified 3D moving new shield latch mechanism secures the shield like never before, but operates smoothly with an intuitive fluid – one finger operation – even with gloves. Visor: PRO Shade System Arai answer to the problem of sun glare & visor fogging. The PSS offers an efficient combination of an easy to flip up, lockable sun peak, the Max Vision visor & the efficient Pinlock inlay lens. PSS offers protection against sun glare, without effecting the integrity & strength of the helmet shell which could be caused by build-in sun visors. Available for both VAS & SAI visor system. Visor: Pinlock insert lens included Effectively prevents misting & fogging of the visor, even under extreme wet & damp conditions. May be cleaned & changed easily. Interior: Antimicrobial Liner New exclusive liner with antimicrobial stays fresher between cleanings. Interior: Replaceable Cheek pads/ Ear cups Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water & mild soap. Rinse well after cleaning & never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Interior Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water & mild soap. Rinse well after cleaning & never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Replaceable Neckroll Depending on the model, cheek pads, ear cups or the complete interior may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water & mild soap. Rinse well after cleaning & never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider. Interior: Facial Contour System (FCS) To offer an even better snug fit & enhancing the comfort to the lower jaw, the Facial Contour System (FCS) works with a foam spring support in the cheek pad that compresses & rebounds, providing the necessary support without excessive pressure. Interior: 5mm ’’ Peel Away’’ Ear cups/ Cheek pads Giving even more ability to craft the perfect fit & comfort, the cheek pads now feature a 5 mm peel away layer for added room if needed. Interior: 5mm ’’ Peel Away’’ Temple pad Arai´s peel-away temple crown pads give the option of 5 mm more interior with* if needed. Interior: Thin centre pad for more room in front area The result is more room around the nose & mouth area enhancing the famous Arai fit & comfort even more. Comfort: Emergency Release System (ERS) Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel & rescuers. Minimising the risk of additional injury. Comfort: Breath guard Works in conjunction with the dual-pivot® chin vent to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down & away from the inside surface of the shield. Comfort: Chin Curtain Attached to the bottom of the helmet, the new chin curtain helps to further accentuate the Egg-shape form. The curtain simultaneously blocks air intrusion from turbulent air below & increases negative pressure to enhance the exhaust function of FFS by drawing more air from the mouth area. The enhanced airflow reduces noise even further. Approval: ECE 22-05 The most common helmet certification internationally, required by over 50 countries worldwide. Five times inspected Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting & graphic completion, after assembly & two in-process inspections. Washable interior The premium quality interior of any Arai helmet can be easily cleaned, in place, with mild soap & lukewarm water. Handmade It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps & to build one Arai helmet will take about 18 man-hours. All-day comfort All-day comfort with the Arai interior fit & shape together with the finest liner materials & the extensive ventilation system. & thanks to the perfect balance & weight distribution of the helmet, you hardly notice you are wearing an Arai. Penetration tested All Arai helmets are penetration tested, although not required by European helmet standards. The Arai penetration test is performed with a 3kg test cone that strikes from a height of 3m on the helmet. Double-D ring device The flat & D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems & just pulling the tab is enough to loosen the fastener. Smooth shape, better protection The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents & ducts are designed to break off during an impact. Hard outer shell, soft inner shell Arai uses a very hard outer shell to spread impact forces & a soft inner shell to absorb remaining energy. The multiple-density EPS inner shell is made using a unique technology of combining three to five densities in various areas as a single component. 5-year limited warranty All Arai helmets are warranted against defects in materials & workmanship, & are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture. Different outer shells Unlike many other manufacturers Arai provides one size outer shell for each two-helmet sizes for most models. Together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for. Arai In-house test This Arai helmet is designed to meet the stringent Arai In-house standard requirements, in addition to mandatory standards such as ECE 22-05 & voluntary standards such as SNELL M2010. Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Honda - The worlds largest manufacturer of engines
Gold - A precious highly conductive metal
LENS - An optical element which converges or diverges light
Foam - A stubstance formed by trapping air in a solid or liquid
Helmet - A form of protection worn on the head to prevent injury
Eye - An organ which detects light
Dry - A term used to describe an item with has little or no water present
Dry - A term used in wine making to describe the lack of sugar (sweetness)
Heat - A term used to define thermal energy
Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
Date - A day on a calendar
Date - A social activity whith a current or potential partner
water - A chemical substance. Chemical formula H2O.
sun - A star at the centre of the solar system.
neck - A part of the body distinguishing the head from the torso.
soap - The salt of a fatty acid used for cleaning and as a component of lubricants.
hot - An indication of the temperature being high and a sensation of heat to the tough
soft - A descriptive word for an item/sound which is gentle to the touch or ears
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
Day - The time it takes a planet or other space objects to complete one rotation.
Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
Quality - An object that has quality is superior in function and finish than a less quality object.
Size - is the measurement of how big an object is in space.
Weight - a measurement of how heavy an object appears due to the pull of gravity. For example the weight of an object on planet earth will be different to the weight of the object on the moon
Weather - is the change of an atmospheres conditions.
F1 - a high level automobile racing tournament
Comfort - something that feels nice to the user. Often relaxing.
Large - something that takes up more space than normal.
Shell - A hard external structure or surface.
Road - a manmade lane or a path that is used to speed up travel.
Gold - A colour, a type of rich metal. Chemical symbol AU.
Corrosion - The wear and tear of an object.
Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
Balance - Something that is evenly weighted to keep something upright.
Ventilation - Giving fresh air to a room on someone's lungs.
Exclusive - Something that is not including other things.
Layer - Adding extra quantities of materials for extra practical benefits, e.g. warmth.
Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.
Assembly - A gathering of people for a purpose e.g. a school assembly
Interior - The inside of something, usually what is not visible.
Feature - An attribute that makes something stand out.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Assembly - A gathering of people all together for the same purpose.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.
Ideal - Something that satisfies a perfect criteria.
Combination - The process of two of more things being mixed or combined together.
Vision - To be able to imagine, also can mean what you can see.

Supplier Information

Motoin UK
Page Updated: 2024-01-23 20:04:44

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu