The 10A IP44 Twilight Sensor with Timer works by gradually increasing and decreasing the light of the luminaires with respect to the predefined ambient light The device has a built-in timer that ranges from 1 to 12 hours or from dusk to dawn in operation
The 120° Surface PIR Motion Sensor combines automation, convenience, security, energy saving and practical functions. It is easy to install and widely used in many applications due to its 120° coverage angle and wide detection range of 6-16 metres at a height of 1.8-2.5 metres
Wall mounted PIR sensor with up to 12 metre and 180° detection rangeTime on once activated adjustable between 10 seconds - 15 minutesIP44 ratedLight level before activation adjustable between 3 - 2000 LUXCannot be overriddenSize: H 120 x W 78 x D 28mm
This PIR Motion Detector can be either recessed in a ceiling or installed on a wall It has a 120º coverage angle and a detection field of up to 6 metres (approximately) when at a height of 1.8~2.5m (on a wall) or 2.2~4m (recessed)
PIR Motion Detector with an E27 baseDetection range of up to 6 meters and 120°. Recommended mounting height of 2 - 2.5 metresIP20 ratedTime on adjustable between 10 seconds and 5 minutesSize: H 116.5 x Dia 55.5mm.
The 360º Microwave Radar Surface Motion Sensor is an energy-saving switch capable of detecting the presence of human movement in a 360º coverage angleIt can control LED luminaires up to 1000W and traditional luminaires up to 2000WInstallation is recommended at a height of 1.5-4M and its detection distance is approximately 8 metres at a 360º angle
IP66 rated compact passive Infra Red (PIR), Occupancy/Person Detector & PhotocellColour: WhiteMaterial: PlasticGuarantee: 3 years guarantee.IP Rating: IP66, Class IDimensions: Overall - H 75 x W 60 x D 37mm
Wall mounted corner PIR sensor with up to 12 metre and 360° detection rangeTime on once activated adjustable between 10 seconds - 15 minutesLight level before activation adjustable between 3 - 2000 LUXCan be over ridden if requiredSize: H 119 x W 79 x D 60mm
Recessed PIR sensor, with up to 8 metre and 360° detection range8 metre detection range achieved when mounted at 2.5 metreLux level before activation adjustable between 10 - 1000Will switch up to 1, 000W incandescent and 200W on all other technologies (incl LED)Time on adjustable between 3 seconds and 18 minutesCan be over-ridden to have light permanently on for max 6 hoursUp to 5 units can be wired in parallel. Total load must not exceed the max of one unitIP44 ratedSize: H 76 x Dia 82mm Cut out - Dia 60mm
Dusk to dawn sensor for use with Timeguard LEDPRO FloodlightsTime on adjustable between 2, 4, 6, 8 hours or Dusk to DawnDusk level adjustment between day & night or night time only operationMaximum LED load of 140WIP55 ratedSize: H 91 x W 78 x D 53mm
The 360º PIR Surface Motion Sensor is an energy-saving switch capable of detecting the presence of human movement in a 360º coverage angleIt can control LED luminaires up to 1000W and traditional luminaires up to 2000W.Installation is recommended at a height of 2.2-4 m and its detection distance is approximately 6 metres at a 360º angle.
Surface mounted PIR sensor, with up to 8 metre and 360° detection range8 metre detection range achieved when mounted at 2.5 metreLux level before activation adjustable between 10 - 1000Will switch up to 1, 000W incandescent and 200W on all other technologies (incl LED)Time on adjustable between 3 seconds and 18 minutesCan be over-ridden to have light permanently on for max 6 hoursUp to 5 units can be wired in parallel. Total load must not exceed the max of one unitIP40 ratedSize: D 50 x Dia 88mm
Switches on only when movement is detected4.5 metre and 360° detection zoneAdjustable time on between 10 seconds and 4 minutesAdjustable light level before light will switch onMaximum loads:1000W incandescent300W fluorescent200W LED
The 1-10V Photoelectric/Twilight Sensor has a 360° detection area and a 1-100% adjustment range. This twilight sensor is compatible with luminaires equipped with 1-10V dimmable drivers
This Photoelectric/Photocell Sensor turns a light ON or OFF depending on the ambient light it receives. It can withstand a charge of 10A.Ideal for signal lights on paths, garden lights, etc.
Adjustable PIR sensor with up to 12 metre and 180° detection zoneTime on once activated adjustable between 10 seconds - 15 minutesLight level before activation adjustable between 3 - 2000 LUXCan be over ridden if requiredSize: H 50 x W 115 x D 80mm
This Motion Detector, which can be recessed in the ceiling, has a 360º coverage angle and a 1 to 8 metre detection field when installed at a height of 1.5 to 3.5 metres.
Flush PIR switchUnobtrusive ceiling mountingIdeal for open plan areas360° detection zoneUp to 6 Amps (1500W) loading for incandescent and fluorescent lighting. LED has maximum load of 2 Amps (500W)