A large climbing frame tower for younger children with FOUR platforms spiraling around within the frame & lots of play variety. Children love this climbing frame because the multiple platforms allow them to hide & access the tower so easily, without any exposed balconies. A short ladder reaches up to the first platform, 60cm (24 inches) off the ground. 30cm (12 inches) higher is another platform with a wooden climbing ramp (with rope) back down to the ground for fun & exercise. A further 30cm up is the third wooden platform, hidden around the corner. The final platform leads to the 3m (10ft ) wavy green slide. On one side of the tower is attached a 8 rung x 4 strand commando net. The swing arm on this Climbing Frame is only 2.5m (98 inches) high to allow the fitting of the Action 2-seater wooden jouster seat accessory in place of one swing. All swings provided are fully adjustable for height. Climbing Frame Package
Includes::
Climbing Frame Platforms & Tower
Double Wooden Swing Frame
Cargo Net
2 x Wooden Swing Seats
3m Slide
Wooden Climbing Ramp Dimensions:
Platform
Size:4 levels each 0.6m x 0.6m (24 x 24 inches)
Platform
Height: 0.6m, 0.9m, 1.2m & 1.5m (24, 36, 47, 59 inches)
Overall
Dimensions & Length Of Swing Arm: 4.9m x L3.5m (193 x L138 inches)
Overall
Height:3.25m (128 inches)
Swing Arm
Height: 2.50m (98 inches)
Tower Dimensions: 1.4m x 1.4m x 3.25m (55 x 55 x 128 inches)
Platform Access: Steps + Climbing Ramp + Commando net
Slide Dimensions: 3.0m (118 inches)
Build Time: Approx. 6 to 8 hours
-----------------------------------------------------------------------------------------------------------------------
General Information
Selected top grade pine (from forests approved & managed under the PEFC) scheme & which is seasoned, machined, planed smooth with rounded edges. All fixing holes & nut recesses are drilled, then the timber is pressure treated using a non-toxic solution approved for chilren's playground equipment.
Included with each product are all necessary fittings (galvanised or stainless steel, fasteners, ropes, a detailed set of assembly instructions & even a drill bit for preparing screw holes. The galvanised swing hangers have low-noise nylon bearings, & bolt through the swing arm beam.
Stability is provided by both the design & utilising Spiralock ground anchors with easy-drive fitting.
Delivery, Installation, & Assembly
Before purchasing of installing your Play Centre, measure your garden. An unobstructed safety area of about 1.5m should be left for access & safety, with a clear zone of about 2.5m in front & behind the swings.
All sections of your Play Centre are delivered flat-packed in manageable components. Delivery: BEFORE SIGNING for your delivery, please check that you have received all the components to build your Play Centre & that none of the packages are damaged or open. Packages are labelled 1/9, 2/9 etc for easy checking. IF YOU ARE UNSURE, please sign 'damaged' or 'missing' & CROSS OUT the line ' Received in good condition' if there is any discrepancy. You should then contact us immediately on 01452-616169.
We recommend two or more people for assembling the Play Centre. You may find it easier to make up the tower components horizontally before raising them upright. You will need some tools for the assembly. In particular, 13mm & 17mm box or socket spanners, a drill with Phillips driver, level & tape measure.
Note: wood is a natural product & as such is subject to the moisture content of the air & ground. Sometimes cracks or splits may appear, but this will not result in weakening of structural stability.
Warranty
All Play Centre products carry a 10 year guarantee against rot & insect infestation on all timber sections.