Strip sizes 10 x 4mm and 15 x 4mm are 30 minute rated and strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts and braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status. Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels and resistance Brown Fire and Smoke 20 x 4 x 2.1m with Brush Pile - Fire Rate 60 minutes
Strip sizes 10 x 4mm and 15 x 4mm are 30 minute rated and strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts and braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status. Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels and resistance
Brown Intumescent Strip Fire & Smoke 10 x 4 x 2100mm with Brush Pile - Fire Rate
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 4.5 x 30mm pozi pack of 200
Strip sizes 10 x 4mm and 15 x 4mm are 30 minute rated and strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts and braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status. Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels and resistance
Intumescent strip White - Fire Only - 10 x 4 x 2.1m Plain Strip - 30mins Fire Rate
Strip sizes 10 x 4mm and 15 x 4mm are 30 minute rated and strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts and braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status. Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels and resistance
You can combine two different strips to achieve a 1 hour ratingWhite Intumescent Strip Plain Fire only 60 Mins 20 x 4 x 2.1m
IronmongeryDirect is proud to introduce this new and exclusive range of high quality, heavy forged solid brass window fittings in a variety of designs to suit both traditional and contemporary projects - Unlike the cheaper cast versions available in the market, these heavy forged products guarantee a perfect finish and a lifetime of faultless operation - Backed by a 25 year guarantee />Hampstead Range Victorian MP+HP Fastener - Polished Brass
IronmongeryDirect is proud to introduce this new and exclusive range of high quality, heavy forged solid brass window fittings in a variety of designs to suit both traditional and contemporary projects - Unlike the cheaper cast versions available in the market, these heavy forged products guarantee a perfect finish and a lifetime of faultless operation - Backed by a 25 year guarantee />Hampstead Range Vic Locking Wedge Fastener - Polished Brass
Strip sizes 10 x 4mm and 15 x 4mm are 30 minute rated and strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts and braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status. Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels and resistance
Intumescent strip 10 x 4 x 2.1m Plain - Brown - Fire Rate 30mins
Regular British pattern covered closer fits the same footprint and screw holes as the Briton 2003 closer. Excellent quality, economical mid-range, fully CE accredited fire door closer that's suitable for offices, surgeries and similar applications.Arrone 2-4 Adjustable Power Closer 2003 Pattern - with Silver Arms and Cover
Strip sizes 10 x 4mm and 15 x 4mm are 30 minute rated and strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts and braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status. Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels and resistance Intumescent Strip Fire Only 15 x 4 x 2.1m Plain, Brown
Strip sizes 10 x 4mm and 15 x 4mm are 30 minute rated and strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts and braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status. Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels and resistance White Fire and Smoke 20 x 4 x 2.1m with Brush Pile - Fire Rate 60 minutes
This BLUMOTION softclose system is for use with the blind corner and bi-fold hinges. Unlike the other softclose systems featured, this mechanism is a stand alone system and can be tapped into a 10mm hole drilled into the edge of the carcass. Alternatively they can be locked into the adaption plates and screw fixed to the inside of the carcass. Sold in packs of 5.Type 3 Blumotion Softclose Mechanism
Strip sizes 10 x 4mm and 15 x 4mm are 30 minute rated and strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts and braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status. Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels and resistance Intumescent Fire Only - 15x4x2.1m Plain, White
This BLUMOTION softclose system is for use with the blind corner and bi-fold hinges. Unlike the other softclose systems featured, this mechanism is a stand alone system and can be tapped into a 10mm hole drilled into the edge of the carcass. Alternatively they can be locked into the adaption plates and screw fixed to the inside of the carcass. Sold in packs of 5.Inline Adaptor Plate
Strip sizes 10 x 4mm and 15 x 4mm are 30 minute rated and strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts and braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status. Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels and resistance
You can combine two different strips to achieve a 1 hour ratingIntumescent Strip Fire only plain 20 x 4 x 2.1m 60 mins Brown
This BLUMOTION softclose system is for use with the blind corner and bi-fold hinges. Unlike the other softclose systems featured, this mechanism is a stand alone system and can be tapped into a 10mm hole drilled into the edge of the carcass. Alternatively they can be locked into the adaption plates and screw fixed to the inside of the carcass. Sold in packs of 5.Cruciform Adaptor Plate
50mm rose - polished/satin nickel mixed finish - Designed for interior timber doors - Bolt through concealed fixings for a solid, permanent fit - Fantastic quality and unbeatable valueCharlotte Mixed Finish Lever Handle - Lever Handles - Polished / Satin Nickel Mix - 50mm Rose - Pair
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 4.0 x 60mm pozi pack of 200
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 4.0 x 45mm pozi pack of 200
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 5.0 x 45mm pozi pack of 200
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 5.0 x 80mm pozi pack of 100
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 4.5 x 40mm pozi pack of 200
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 5.0 x 50mm pozi pack of 200
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 4.5 x 60mm pozi pack of 200
The Premium Alarm is Yale's top-of-the-range house alarm that will ring you when triggered, for the ultimate peace of mind. The telecommunicating panel performs all the functions of the standard control panel with the additional feature of alerting you by telephone should the alarm be activated. The system can store up to three telephone numbers, such as your home, mobile and work numbers, and will call them in a specified sequence. The system can also be activated and deactivated using your touch-tone telephone. The kit contains: 1 x telecommunicating control panel 1 x siren box with flashing LED 1 x dummy siren box 2 x PIR movement detectors 2 x door/window contacts
Yale Premium Alarm Kit - Kit contains 1 x siren box with flashing LED, 1 x telecommunicating control panel, 2 x PIR movement detectors, 2 x door/window contacts, 1 x dummy siren box
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 4.5 x 25mm pozi pack of 200
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 4.5 x 80mm pozi pack of 200
IronmongeryDirect is proud to introduce this new and exclusive range of high quality, heavy forged solid brass window fittings in a variety of designs to suit both traditional and contemporary projects - Unlike the cheaper cast versions available in the market, these heavy forged products guarantee a perfect finish and a lifetime of faultless operation - Backed by a 25 year guarantee />Hampstead Range Victorian Wedge Fastener - Polished Brass
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.5 x 35 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.0 x 35 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 3.5 x 16 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.0 x 16 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 3.5 x 40 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 3.0 x 12 - Bit Size 1 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 3.0 x 20 - Bit Size 1 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 3.5 x 35 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 3.5 x 12 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 3.5 x 30 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 3.5 x 25 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 3.5 x 20 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.0 x 20 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.0 x 40 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 5.0 x 80 - Bit Size 2 - 100 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.0 x 60 - Bit Size 2 - 100 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.0 x 30 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 5.0 x 40 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.0 x 25 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.5 x 25 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 5.0 x 30 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.5 x 40 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 5.0 x 100 - Bit Size 2 - 100 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 5.0 x 60 - Bit Size 2 - 100 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 5.0 x 70 - Bit Size 2 - 100 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 5.0 x 50 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 5.0 x 45 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 5.0 x 25 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.5 x 50 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.5 x 30 - Bit Size 2 - 200 Box
A traditional catch used in a wide range of furniture production, now available in satin chrome for contemporary applications. The tension of these catches is adjustable with the use of a flat head screw driver allowing for precision pressure requirements.Veel-2 Double Ball Roller Catch 50 x 9.3mm - Satin Chrome
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.0 x 50 - Bit Size 2 - 200 Box
The combination of 4CUT point, MULTIhead and the patented ground serrations guarantees a fast and accurate Spax drive every time!
It not only stretches the material out, it divides the fibres while the thread with the optimised ground serrations drives the screw on, preventing the material from splitting.
The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily.
Spax will give trouble-free fastening in all varieties of working material - from hard and soft wood to plastics to thin sheet metal and extruded profiles.
Naturally, Spax has the building authority's approval. Spax Woodscrews - 4.0 x 45 - Bit Size 2 - 200 Box
One Restrictor for Every Style of Window - This cable window and door restrictor was designed with Health and Safety in mind. Exceeding the demands of the British Standard BS 6375 Part II Test 6 to a level of over 1, 400 Newtons, this cable restrictor can be fitted to any style of window and any window material including slim line steel W20. You may have already seen these restrictors fitted by organisations such as Travelodge Hotel Group, Leicester City Council, Thistle Hotels and the London Ritz Hotel. />Jackloc Window Restrictor - Chrome
One Restrictor for Every Style of Window - This cable window and door restrictor was designed with Health and Safety in mind. Exceeding the demands of the British Standard BS 6375 Part II Test 6 to a level of over 1, 400 Newtons, this cable restrictor can be fitted to any style of window and any window material including slim line steel W20. You may have already seen these restrictors fitted by organisations such as Travelodge Hotel Group, Leicester City Council, Thistle Hotels and the London Ritz Hotel. />Jackloc Window Restrictor - White
One Restrictor for Every Style of Window - This cable window and door restrictor was designed with Health and Safety in mind. Exceeding the demands of the British Standard BS 6375 Part II Test 6 to a level of over 1, 400 Newtons, this cable restrictor can be fitted to any style of window and any window material including slim line steel W20. You may have already seen these restrictors fitted by organisations such as Travelodge Hotel Group, Leicester City Council, Thistle Hotels and the London Ritz Hotel. />Jackloc Window Restrictor - Brown
It's now possible to achieve a considerable fitting time saving when fitting self closing doors where you would traditionally fit hinges and a chain closer. The adjustable spring hinges featured here will close a door in a similar fashion to a chain type closer; sprung closing action without checking action. If a controlled closing action is required then you should fit standard hinges and an overhead closer as featured elsewhere on the website or in our catalogue.
The self closing spring tension can be disengaged by the removal of a small grub screw, allowing the door to swing freely, if it is no longer required to be a fire resisting door.
Adjustable Sprung Hinges 100x75mm Polished Chrome. Supplied as 3 hinge sets
It's now possible to achieve a considerable fitting time saving when fitting self closing doors where you would traditionally fit hinges and a chain closer. The adjustable spring hinges featured here will close a door in a similar fashion to a chain type closer; sprung closing action without checking action. If a controlled closing action is required then you should fit standard hinges and an overhead closer as featured elsewhere on the website or in our catalogue.
The self closing spring tension can be disengaged by the removal of a small grub screw, allowing the door to swing freely, if it is no longer required to be a fire resisting door.
Adjustable Sprung Hinges 100x75mm Satin Chrome. Supplied as 3 hinge sets
Strip sizes 10 x 4mm and 15 x 4mm are 30 minute rated and strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts and braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status. Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels and resistance
White Intumescent Strip Fire & Smoke 10 x 4 x 2100mm with Brush Pile - Fire Rate 30 minute
It's now possible to achieve a considerable fitting time saving when fitting self closing doors where you would traditionally fit hinges and a chain closer. The adjustable spring hinges featured here will close a door in a similar fashion to a chain type closer; sprung closing action without checking action. If a controlled closing action is required then you should fit standard hinges and an overhead closer as featured elsewhere on the website or in our catalogue.
The self closing spring tension can be disengaged by the removal of a small grub screw, allowing the door to swing freely, if it is no longer required to be a fire resisting door.
Adjustable Sprung Hinges 100x75mm Electro Brassed. Supplied as 3 hinge sets
Strip sizes 10 x 4mm and 15 x 4mm are 30 minute rated and strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts and braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status. Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels and resistance
Brown Fire and Smoke 15 x 4 x 2.1m with Brush Pile Fire Rate 30 minute
Original Veel catches. High quality, same specifications, presented in new designs to suit today's furniture styles. A favourite with furniture manufacturers. High quality precision catches ideal for use in high quality furniture or shopfitting applications.
Choose thees catches if the quality of the job is paramount.Veel-2 Magnetic Catch 6.0kg Pull 56 x 14 x 14mm - White
Original Veel catches. High quality, same specifications, presented in new designs to suit today's furniture styles. A favourite with furniture manufacturers. High quality precision catches ideal for use in high quality furniture or shopfitting applications.
Choose thees catches if the quality of the job is paramount.Veel-2 Magnetic Catch 4.5kg Pull 42 x 14 x 14mm - White
Original Veel catches. High quality, same specifications, presented in new designs to suit today's furniture styles. A favourite with furniture manufacturers. High quality precision catches ideal for use in high quality furniture or shopfitting applications. Choose thees catches if the quality of the job is paramount.
• Original Veel catches
• Suits modern furniture styles • Furniture manufacturer's choice • High quality Veel-2 Magnetic Catch 6.0kg Pull 46 x 15 x 14mm - Brassed
Strip sizes 10 x 4mm and 15 x 4mm are 30 minute rated and strip size 20 x 4mm is 60 minute rated. The 15mm width is the popular choice or doorset manufacturers who prefer the size due to its 'belts and braces' way of getting through fire tests. The leading brand fire resisting doors are fitted with the 15mm size, one strip for 30 minute doors and 2 strips running parallel, but approx 6mm apart, plus one brush and one plain where smoke seals are required around the door to achieve FD60 status. Additionally, factory doorset manufacturers use this size as it has enabled them to use one size cutter for either FD30 or FD60 doors, albeit set up differently. The Fire Only strip is plain, whereas the Fire & Smoke has a brush. All brushes are black with no frustrating plastic fin, reducing noise levels and resistance
White Fire and Smoke 15 x 4 x 2.1m with Brush Pile Fire Rate 30 Minutes
A traditional catch used in a wide range of furniture production, now available in satin chrome for contemporary applications. The tension of these catches is adjustable with the use of a flat head screw driver allowing for precision pressure requirements.Veel-2 Double Ball Roller Catch 60 x 11.5mm - Satin Chrome
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 6.0 x 100mm pozi pack of 100
Chippy screw Plusdrive Countersunk (referred to as yellow or Euro screws) Hardened Recessed Steel Zinc Plated and Yellow Passivated Single Threaded Wood and Chipboard Screws. These screws are especially suitable for manmade board such as chipboard and MDF also most hardwoods. They will not drive as fast as Twinqwik screws but their deep sharp threads, waxed finish and sharp point give easy insertion and secure grip. The plusdrive recess makes driving easier, safer and more positive, making these screws an ideal choice for power drivers. Chippy Countersunk Head Hardened Single Thread Pozi Size 6.00 X 70 Box Quantity 100
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 6.0 x 120mm pozi pack of 100
A fully concealed door control that is fitted into the hinged edge. Operated with a strong twin spring assembly and hydraulic controlled closing action suitable for interior doors up to 75kg, including fire resisting doors. Fully reversible. Unlike overhead closers, this closer allows the door to be shut ahead of the closing action. End plate sets sold separately convert the standard brass forend.Perkomatic Slow Closer With Rounded Ends 168 x 60 x 22.5mm - Brass
Ulti-Mate has the very latest Pozisquare recess which gives you the stick fit with the driver bit that is supplied free in every box. This innovative recess allows higher fastening torque, is safer and more stable and can be driven with any cross point driver. The screw recess provides better protection against driver bit damage. Ulti-Mate screws have self-countersinking ribs and the thicker, stronger shank works better in a wall plug. The single lead thread provides smoother controlled driving; Important for power tools. This single thread resists stripping and gives greater holding power. Ulti-Mate screws start quickly, drill their own pilot hole and their waxed coating allows them to drive in easier. Hardening makes them tough and resistant to recess damage. With their Golden zinc finish they look great in all your projects.
/>•Please see product codes FX-0099, FX-0101 and FX-0102 for budget plastic wall plugs •Please see product codes XF2400, XF2401 and XF2401 for Fischer Plastic Wall Plugs The Ulti-Mate Woodscrew Size Ulti-Mate Pack 1 - Pack contains 200 each of: 4mm x 25, 4mm x 30, 4mm x 40, 4mm x 50 and 5mm x 70
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 5.0 x 60mm pozi pack of 200
Suitable for soft and hard woods, MDF, plywood, plastic, thin sheets of metal and more - Super fast patented Twist Shank for exceptional performance - 200 hours salt spray resistance due to its special plating - Self-countersinking />Velocity Screw 3.0 x 16mm pozi pack of 200
Grade Stainless Steel: stainless is a higher grade of metal that is resistant to oxidisation and corrosion even in the most extreme environments. You can safely specify and fit these products on interior and exterior doors, washroom environments that are prone to damp, kitchen environments where the metal is ideally suited to hygienic conditions
Satin Stainless: the most popular of the three finishes and is widely used to projects as diverse as offices to prestige housing. It is selected predominantly due to style and appearance. Particularly suited to environments such as schools and factories where the satin finish does not show dirty finger prints and marks.
316 Polished Stainless: style and appearance are probably the main reason for selecting the polished finish.
316 PVD Brass: maintenance free brass finish that will not break down and is impervious to oxidation. Simple maintenance by cleaning with a soft cloth and a non-abrasive household wax polish. Stubborn stains can be removed with simple soap and water.
10-Year Guarantee: both finish and mechanical quality are covered by the manufacturer's impressive guarantee. Helping Hand: handles marked with the wheelchair symbol are ideal for doors used by people with disabilities or special needs such as the elderly or children.
Fire Doors: Altro Range stainless steel products are ideal for fitting to fire doors. It is essential however that fire doors are fitted using CE accredited hinges, closers and panic hardware all of which are featured in this catalogue. Look out for the fire door symbol.Altro D' Bolt Fixed Handle 152 c/c 16mm Diameter - 316 Satin Stainless Steel
A traditional catch used in a wide range of furniture production, now available in satin chrome for contemporary applications. The tension of these catches is adjustable with the use of a flat head screw driver allowing for precision pressure requirements.Veel-2 Double Ball Roller Catch 43 x 8mm - Satin Chrome
Chippy screw Plusdrive Countersunk (referred to as yellow or Euro screws) Hardened Recessed Steel Zinc Plated and Yellow Passivated Single Threaded Wood and Chipboard Screws. These screws are especially suitable for manmade board such as chipboard and MDF also most hardwoods. They will not drive as fast as Twinqwik screws but their deep sharp threads, waxed finish and sharp point give easy insertion and secure grip. The plusdrive recess makes driving easier, safer and more positive, making these screws an ideal choice for power drivers. Chippy Countersunk Head Hardened Single Thread Pozi Size 4.00 X 16 Box Quantity 200
Chippy screw Plusdrive Countersunk (referred to as yellow or Euro screws) Hardened Recessed Steel Zinc Plated and Yellow Passivated Single Threaded Wood and Chipboard Screws. These screws are especially suitable for manmade board such as chipboard and MDF also most hardwoods. They will not drive as fast as Twinqwik screws but their deep sharp threads, waxed finish and sharp point give easy insertion and secure grip. The plusdrive recess makes driving easier, safer and more positive, making these screws an ideal choice for power drivers. Chippy Countersunk Head Hardened Single Thread Pozi Size 3.00 X 12 Box Quantity 200
Chippy screw Plusdrive Countersunk (referred to as yellow or Euro screws) Hardened Recessed Steel Zinc Plated and Yellow Passivated Single Threaded Wood and Chipboard Screws. These screws are especially suitable for manmade board such as chipboard and MDF also most hardwoods. They will not drive as fast as Twinqwik screws but their deep sharp threads, waxed finish and sharp point give easy insertion and secure grip. The plusdrive recess makes driving easier, safer and more positive, making these screws an ideal choice for power drivers. Chippy Countersunk Head Hardened Single Thread Pozi Size 3.50 X 40 Box Quantity 200
Chippy screw Plusdrive Countersunk (referred to as yellow or Euro screws) Hardened Recessed Steel Zinc Plated and Yellow Passivated Single Threaded Wood and Chipboard Screws. These screws are especially suitable for manmade board such as chipboard and MDF also most hardwoods. They will not drive as fast as Twinqwik screws but their deep sharp threads, waxed finish and sharp point give easy insertion and secure grip. The plusdrive recess makes driving easier, safer and more positive, making these screws an ideal choice for power drivers. Chippy Countersunk Head Hardened Single Thread Pozi Size 4.50 X 70 Box Quantity 200