Brintons MMC PRO 5L

Product Description

Brintons MMC-PRO For professional/commercial users MMC-PRO is the most efficient way to treat mould, algae & moss on all hard surfaces. In comparison, pressure-washing is time-consuming, labour-intensive & abrasive, it often accelerates the growth of mould & algae. MMC-PRO: broad-spectrum anti-viral & antibacterial disinfectant, fungicide/algaecide & cationic detergent. Target: black/green mould/algae & moss on all exterior hard surfaces. Function: the product will kill mould & other growths within typically 2-4 days, & the secondary detergent action will help to clean the treated exposed surfaces in the following weeks & months. KEY BENEFITS Easy & Quick Application Simply dilute with water & apply when the surface is dry. Saturate the surface. Don't apply if rain is expected in the following 5-6 hours. No scrubbing. No pressure washing. There is no need for aggressive & time-consuming cleaning systems. Non-abrasive Only apply with a knapsack sprayer or other low-pressure applicator. Multisurface MMC-PRO is suitable for all exterior hard surfaces (see below), including delicate surfaces such as plaster & glass. Long-lasting effect The product will typically protect against re-growth for 6-9 months after the first treatment, & for 9-12 months after subsequent treatments. Biodegradation & classification MMC-PRO is readily biodegradable to EC/OECD standards, contains no bleach or acids, & is not corrosive. MMC-PRO, as supplied, is classified N, Xi: R36/38 under CHIP3. At the minimum dilution rate of 1:4, the dilute a zero human health hazard classification. It is classified as Dangerous for the Environment because of its toxicity to aquatic life. MMC-PRO is fully HSE & PCS approved. It works on ALL outdoor hard surfaces, including: BRICKWORK, ARTIFICIAL SURFACES, MASONRY, ROOFING, DRIVEWAYS, ASPHALT, PAVING, TIMBER FENCING, CAR PARKS, MONUMENTS, HEADSTONES, CONCRETE, FIBREGLASS, PLASTIC & METAL SURFACES, TENNIS COURTS, GRAVEL, RENDERING, PAVEMENTS, PLAYGROUNDS, GLASS, PAINTWORK. For professional/commercial users, Dilution & Coverage, Normal purposes: Light growths
- Dilution rate 1: 4 or 1: 9, Total dilute: 25 litres or 50 litres, Rougher surfaces: 75-100 m 2/150-200 m 2, Smoother surfaces: 175+ m 2/350+ m 2, MMC-PRO will function at dilution rates in excess of 1:9, however generally recommended this as a maximum in order to minimise the frequency of re-treatment.