More From Contributor

The Putter Shaft Bending Tool means that you can alter lie angle & face angle on curved shafts. Perform quick & easy custom alterations of putters built with double- or single-bend shafts. Curved shaft putters cannot be altered for lie or to make the face sit absolutely square unless the shaft is bent. Although this tool does not make a curved shaft from a straight shaft, it permits lie angle & face angle changes to putter shafts. Mounts in a bench vice â just put the shaft between the rollers for custom bends, whether the shaft is behind or in front of the clubface. VICE NOT INCLUDED ...

Available

Product Description Shaft Clamp This Shaft Clamp grasps a full 3 inches of the shaft tip for a secure hold that will not let go. ...

Archived Product

!!!! Shaft Clamp!!!! This Shaft Clamp grasps a full 3 inches of the shaft tip for a secure hold that will not let go. ...

Archived Product

Product Description This extraordinarily simple yet effective tool removes grips with a minimum of effort & preserves them for re-installation. The spring-rod design improves the tool's efficiency by creating a channel for the grip solvent, allowing the solvent to penetrate into the grip faster & easier. The rounded edges & tip reduce damage to both the grip & graphite shafts. Lubricate the dual spring-rod blades with grip solvent, then work it under the mouth of the grip. Slide the tool up inside the butt end of the club (apply more solvent as necessary), then work the tool quickly around the circumference of the shaft. Both grip & tool slide off the shaft effortlessly. NOTE: this tool is not recommended for use with Winn grips. ...

Archived Product

Product Description The Golfsmith Straight Fluted Hand Reamer is excellent for finishing & re-conditioning hosel bores for re-shafting purposes, providing a high degree of accuracy & surface finish. It is made to exacting specifications, to offer a good allowance between the shaft & hosel for the perfect epoxy bond. This reamer removes as much as 0. 003" (0. 1mm) of material per side from standard-sized hosel bores & is further distinguished by the slightly longer leads to guide & centralize the reamer in the hole. While specifically designed for hand reaming operations, this reamer can also be used on a drill press at 150 RPM's or below. ...

Archived Product

The Golfsmith Straight Fluted Hand Reamer is excellent for finishing & re-conditioning hosel bores for re-shafting purposes, providing a high degree of accuracy & surface finish. It is made to exacting specifications, to offer a good allowance between the shaft & hosel for the perfect epoxy bond. This reamer removes as much as 0.003" (0.1mm) of material per side from standard-sized hosel bores & is further distinguished by the slightly longer leads to guide & centralize the reamer in the hole. While specifically designed for hand reaming operations, this reamer can also be used on a drill press at 150 RPM&0s or below. ...

Available

{ Summary} Designed for indoor use, this compact gauge provides precise readings of swing & ball speeds up to 150 mph, accurate to a tenth of a second. Easily adjusts for tilt & height & comes with reflective tape stickers to increase reliability. Requires four AA batteries (not included) ...

Archived Product

Golfsmith Spring-Rod Grip Remover

This extraordinarily simple yet effective tool removes grips with a minimum of effort and preserves them for re-installation. The spring-rod design improves the tool&0s efficiency by creating a channel for the grip solvent, allowing the solvent to penetrate into the grip faster and easier. The rounded edges and tip reduce damage to both the grip and graphite shafts. Lubricate the dual spring-rod blades with grip solvent, then work it under the mouth of the grip. Slide the tool up inside the butt end of the club (apply more solvent as necessary), then work the tool quickly around the circumference of the shaft. Both grip and tool slide off the shaft effortlessly. NOTE: this tool is not recommended for use with Winn grips.

Availability: In Stock
Supplier: Gamola Golf
SKU: 5144

Description Reviews / Comments Add New

Product Description

This extraordinarily simple yet effective tool removes grips with a minimum of effort & preserves them for re-installation. The spring-rod design improves the tool&0s efficiency by creating a channel for the grip solvent, allowing the solvent to penetrate into the grip faster & easier. The rounded edges & tip reduce damage to both the grip & graphite shafts. Lubricate the dual spring-rod blades with grip solvent, then work it under the mouth of the grip. Slide the tool up inside the butt end of the club (apply more solvent as necessary), then work the tool quickly around the circumference of the shaft. Both grip & tool slide off the shaft effortlessly. NOTE: this tool is not recommended for use with Winn grips.

Reviews/Comments

Add New

Supplier Information

Gamola Golf

Tee off in style with Gamola Golf (http://www.gamolagolf.co.uk/)! Explore our extensive selection of premium golf equipment, accessories, and apparel, meticulously curated to elevate your game. From cutting-edge clubs to stylish attire, we offer everything you need to step onto the green with confidence. With top brands like Callaway, TaylorMade, and Titleist, you can trust in quality and performance. Whether you're a seasoned pro or a novice golfer, Gamola Golf has the gear to help you drive, chip, and putt your way to success. Unleash your potential and dominate the fairways with Gamola Golf!

More From Contributor

Golfsmith Spring-Rod Grip Remover

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account