Black Hanging E27 Lamp Holder for our mains voltage connectable lights range.
This E27 lamp holder accessory can be used in line with all our connectable mains voltage products and is often used with a flash bulb to add dramatic effect. Most commonly used in cross street string or curtain light displays in town centres, or chose to locate within an Icicle run along a roof line.
Y Connector, available in black or white, for our mains voltage connectable lights range. This accessory has two main uses:
To convert the starter cable in to two separate outlets
Can be inserted in between any compatible products to add flexibility to the display
For example: If you wish to put lights on two separate trees that are close together but only have one mains outlet. Simply run the starter cable to the base of the trees and attach the connector. This will now give you two outlets, one for each tree.
This accessory is 30cm long and can be connected together to create a more advanced display.
This Multi Function controller offers 8 settings to ensure your rope light is powered to your desired setting. The controller is for use with our cut to length rope light range and can be used instead of the standard power cord.
It comes with a 1.5 metre lead cable to ensure you have sufficient flex to reach the power source.
Curtain connector for our mains voltage connectable lights range.
The curtain accessory is used to convert a number of standard strings of lights into a curtain effect. Standard string lights typically join end to end like a daisy chain but when they are used with the curtain connector they simply hang down from the 9 ports available.
The connector is 1m wide with 10cm gap in between each port.
Note: Comes supplied with waterproof blanking caps so any ports that you do not wish to use can be blanked off. Multiple curtain accessories can be added together to increase the width of the curtain.
As the curtain connector has to support a number of light strings, it has been manufactured with heavy duty rubber cable for strength and durability.
Black T Connector for our mains voltage connectable lights range.
This accessory has two main uses:
To convert the starter cable in to two separate outlets.
Can be inserted in between any compatible products to add flexibility to the display.
For example: If you wish to put lights on two separate trees that are close together but only have one mains outlet. Simply run the starter cable to the base of the trees and attach the connector. This will now give you two outlets, one for each tree.
5 metre extension cable, available in black or white, for our mains voltage connectable lights range. By far the most frequently used accessory in this range and has two main uses:
To extend the distance between the plug and the first light
Can be inserted between two compatible products
For example: if you wish to put lights on two trees, one at the top and one bottom of the garden, but do not want lights running in between. Then you would use the extension cable to carry the power from the lights on the first tree to the lights of the second tree.
Multiple extension cables can be connected together to increase length as required.
Black In Line E27 Lamp Holder for our mains voltage connectable lights range.
This E27 lamp holder accessory can be used in line with all our connectable mains voltage products and is often used with a flash bulb to add dramatic effect. Most commonly used in cross street string or curtain light displays or randomly within a decorated display tree.
10 metre extension cable, available in black or white, for our mains voltage connectable lights range. By far the most frequently used accessory in this range and has two main uses:
To extend the distance between the plug and the first light
Can be inserted between two compatible products
For example: if you wish to put lights on two trees, one at the top and one bottom of the garden, but do not want lights running in between. Then you would use the extension cable to carry the power from the lights on the first tree to the lights of the second tree.
Multiple extension cables can be connected together to increase length as required.
T Connector for our mains voltage connectable lights range, available in either black or white.
This accessory has two main uses:
To convert the starter cable into two separate outlets.
Can be inserted in between any compatible products to add flexibility to the display.
For example, if you wish to put lights on two separate trees that are close together but only have one mains outlet, simply run the starter cable to the base of the trees and attach the connector. This will now give you two outlets, one for each tree.
Perfect for commercial or large domestic displays, this plug in Circuit Breaker will allow you to test your lights before you switch them straight on. Simple and easy to use, you can reset, test and assess your display all at the touch of a button.
Technical Specification:
240v Voltage
13amp Max. Current
3120 Watts Max. Load
30mA Trip Current
Ring connector for our mains voltage connectable lights range, available in black or white.
Using this accessory can create an impressive display when decorating all types of indoor and outdoor trees.
The connector is 1m wide with 10cm gap in between each port.
For example: When decorating a deciduous tree with lights, many people’s preference is to wrap the individual branches. This is very difficult to do with a single string of lights and can leave the display looking, well, far from ideal.
Start by placing the ring accessory where the main trunk starts to split, and then you are free to fill the 5 individual outlets with light strings to wrap around the branches.
This Multi Function controller offers 8 settings to ensure your rope light is powered to your desired setting. The controller is for use with our cut to length rope light range and can be used instead of the standard power cord.
It comes with a 5 metre lead cable to ensure you have sufficient flex to reach the power source.
White Starter Cable for our mains voltage connectable lights range.
This starter cable(MV021W) will power up to a maximum of 7600 LEDs.
The starter cable comes with a standard household plug and a 2metre lead cable (from the plug to the first light). As the starter cable is integral in keeping your display shining, it has been manufactured with heavy duty rubber cable and supplied with a high quality fuse, ensuring reliability.
Available in black or green, and in small, medium and large sizes, the Dri-Box has been developed by our Festive Lights design team out of necessity for housing outdoor connections. Across the market, there has been a demand for a simple portable weatherproof connection box that is high quality and affordable.
The design incorporates a very simple hinged clamp mechanism that can be opened or closed quickly, allowing access and closure immediately without the need to release or tighten screws. The lid also features an innovative waterproof interface, which moulds around cables when clamped to the box, giving you complete peace of mind.
The box volume has been considered carefully too, as we all know space can be taken up quickly with transformers, controllers, spare cables, timers and the gang socket.
You can also use the box throughout the year to protect electrical connections during gardening and outdoor maintenance jobs.
Portable, durable, simple, safe & affordable.
Q20 is the leading moisture repellent for protecting and removing moisture. It's specially formulated to repel moisture and since 1950, has been the market leader in the motor industry removing moisture from ignition systems on any vehicle.
However its unique penetrating power and properties make it ideal for protecting and preserving your outdoor lights. We have tested it and are bowled over by how well it works as a rust and moisture repellent. Q20 is so effective, it even has the power to mix Electric with Water!
Ever had your icicles discoloured by weathering or LEDs browning?, just spray them with Q20 before hanging on the gutter to guarantee protection for the Christmas period or up to 2 months. Likewise, if you are a contractor installing mains voltage connectable string lights or festoon and moisture has tripped the system, simply spray inside each connection before you connect. This will save time and maintenance costs leaving you with peace of mind at every job.
In fact you can use Q20 on all vulnerable connections for example, on outdoor Rope Light motifs, Moulded Figures, Inflatable motors, Fibre Optics, Stake Lights, Solar products and battery packs.
Q20 can become part of your DIY kit as it has hundreds of uses in and around the home as a light duty lubricant, plus it is a Silicone Free Formula.
Facilitates movement prevents rust of door hinges.
Extends the life of exterior light bulbs (sprayed on electrode contacts)
Prevents moisture forming in electrical motors especially power tools
Maintains conduction of current in electric circuits
A temporary rust preventive for any exposed metal
Protects metal tools from corrosion
Lubricates and loosens locks catches and prevents any squeaking
Protects the underside of vehicles
Superior for all sorts of stubborn stains
Black Starter Cable for our mains voltage connectable lights range.
This starter cable(MV021B) will power up to a maximum of 7600 LEDs.
The starter cable comes with a standard household plug and a 2metre lead cable (from the plug to the first light). As the starter cable is integral in keeping your display shining, it has been manufactured with heavy duty rubber cable and supplied with a high quality fuse, ensuring reliability.
White Starter Cable for our Mains Voltage Connectable Festoon Lights range.
This starter cable(MV050W) will power up to a maximum of 7600 LEDs.
The starter cable comes with a standard household plug and a 2 Metre lead cable (from the plug to the first light).
As the starter cable is integral in keeping your display shining, it has been manufactured with heavy duty rubber cable and supplied with a high quality fuse, ensuring reliability.
Professional PVC mounting strip for rope light. This is made of tough clear plastic and comes supplied in 1 metre lengths.
The rope light simply clips into the channel which keeps it nice and straight when installing. The strip can be mounted using screws, small nails or adhesive glue but should be pre-drilled initially.