United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Backcountry Ski Boots
Archived Product
-
The Typhoon mixes
top-level alpine
performance with a
ski/walk mode for maximum
versatility. The spine is
reinforced with Power
Ribs to add strength
without affecting the
overall weight. The liner
is the Intuition Speed
Pro, theres double
canting and a dual
injected Pebax shell for
comfort and power. Comes
with 2 tongues and 2
separate soles, ISO Norm
for alpine skiing and
Rally sole for
mountaineering.
Availability: In Stock
£450.00
Available
-
The Ranger Free 120 Walk
is an impressively light
freeride boot that hikes
as well as it skis. A
Grilamid shell and cuff
keep the weight low
without compromising on
the performance. Vibram
GripWalk soles improve
traction; the 3D
pre-shaped Active Fit
Zone liner can be heat
moulded to improve
comfort and foot hold.
Total weight is under
1600g a boot (size 26.5)
and the neatly integrated
ski/walk mechanism adds
55 degrees of motion.
Given the stats it's easy
to understand how this
boot is so good on
descents and
ascents.Ability
LevelOverviewFitA medium
to low volume fit all
over with a slightly more
downhill performance
feel.Shell
Carbon-reinforced
Grilamid shell and cuff.
Traditional 2-piece
design for the best
performance when skiing.
Grilamid for the perfect
balance of lightweight,
power and consistent
characteristics whatever
the temperature.Liner3D
Active Fit Zone liner,
mouldable. Pre-shaped for
the best fit out of the
box, mouldable to ensure
the best possible
comfort, foot hold and
performance. Active Fit
Zones use softer material
in sensitive areas, with
firmer materials where
support and power
transmission are needed,
these stiffer areas
include flex zones for a
dynamic fit. Loops are
included on the liner in
case laces are wanted for
the best foot hold.Key
FeaturesSki/Walk ModeWhen
the best downhills are
waiting on the other side
of a long uphill, the
Ranger's excellent
walkability is a skier's
best friend. Switch the
clever integrated lever
on the side of the cuff
to walk mode for an
excellent range of
forward motion. This
switch location makes it
easy to access and
ensures no compatibility
issues with walking
crampons.SpecificationCategory:
BackcountryFlex: 120Last
Width: 99Custom Shell:
NoCustom Liner: YesPower
Strap: Cinch 52mmVolume:
MediumClips: 4 x Ranger
Free Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Hike Ride Lock
ModeRange of Motion:
55Weight (g): 1650 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£420.00
Available
-
Is a boot geared more for
the climb or for the
descent? This common
dilemma is finally a
thing of the past because
the Hoji has turned the
question of 'either-or'
into simply 'and'. Thanks
to the clever Hoji-Lock
system, there's a direct
connection between cuff
and shell. The result is
the power and rigidity of
a pure-bred alpine boot
on the downhill, blended
with maximum freedom of
movement, flexibility
and comfort on the
climb.Ability
LevelOverviewFitLow
volume lower leg, medium
volume around heel and
ankle with generous
instep and forefoot
space.Shell Grilamid
shell and carbon-loaded
Grilamid cuff. Cabrio
design makes getting in
and out easy; Grilamid
plastic ensures a
consistent performance
whatever the temperature
– no
over-stiffening at low
temperatures.LinerCustom
light, mouldable.
Lightweight and heat
moulded in store for the
best possible fit,
comfort and
performance.Key
FeaturesHoji Lock
SystemInnovative ski/walk
mode that creates and
impressive range of
motion for hiking and
skinning and also a
super-secure lock for
powerful skiing. Utilised
via a simple 1 lever
system that also releases
the tension on the cuff
buckle and
powerstrap.Ultralock
PowerstrapOne motion for
tensioning and one for
releasing, simple and
convenient.Anklestrap
BuckleSituated for the
best foot hold and
comfort, designed so
that it can be easily
tightened or released,
as well as
micro-adjusted, with
just one hand.Speed NoseA
shortened toe on the boot
reduces weight by 15%
whilst also enabling a
more efficient
roll-through by the
foot.Rear SpoilerStandard
forward lean is 11o, the
addition of the Grilamid
Spoiler increases this to
15o.SpecificationCategory:
BackcountryFlex: 120Last
Width: 103.5Custom Shell:
noCustom Liner: yesPower
Strap: CinchVolume:
medium-highClips: Sole
Unit: Non CertifiedPin
Inserts: YesHike Mode:
yesRange Of Motion:
55Weight (g): 1450Binding
Compatibility: Pin
Availability: In Stock
£348.00
Available
-
The Ranger Free 120 Walk
is an impressively light
freeride boot that hikes
as well as it skis. A
Grilamid shell and cuff
keep the weight low
without compromising on
the performance. Vibram
GripWalk soles improve
traction; the 3D
pre-shaped Active Fit
Zone liner can be heat
moulded to improve
comfort and foot hold.
Total weight is under
1600g a boot (size 26.5)
and the neatly integrated
ski/walk mechanism adds
55° of motion. Given the
stats it's easy to
understand how this boot
is so good on descents
and ascents.
Availability: In Stock
£250.00
Available
-
Using many features of
the top-end models in the
range, the Hawx Prime
XTD 100 HT is an
excellent introduction in
to the world of BC ski
boots providing
performance, comfort and
excellent value. Prolite
construction uses
different thicknesses of
shell wall to balance
lightweight with power
and control. The
Free/Lock hike and ski
system provides 54deg of
motion, ease of use and,
thanks to the way it
integrates the Energy
Backbone, precise ski
control. Memory Fit on
the shell means it can be
heat moulded to even more
closely match the foot
shape; the 3D Silver
Touring liner takes a
mould of the heel and
ankle area for the best
comfort and control.
Comes with GripWalk soles
and tech insoles at the
toes (not at the heel) so
it can be used with a
range of bindings.
Ability Level Overview
Fit An average fit on the
rearfoot with generous
forefoot width and a
medium to high instep.
Shell Prolite PU Memory
Fit shell with PU Memory
Fit cuff, mouldable. The
advanced heat fitting
technology o...
Availability: In Stock
£370 GBP
Available
-
The Hawx Ultra XTD 115 W
has the power and feel of
a freeride boot thanks to
Prolite construction and
True Flex plastic, but
also the lightness of a
proper tour model. The
range of motion is an
impressive 54°, making
ascents more comfortable;
the Free/Lock 2.0 is an
easy and effective walk
mode that is solid when
locked in to ski
position. Atomic's Memory
Fit customisable shell
can be heat moulded
during fitting, adding
4mm extra width if
needed. The totally new
Mimic liner technology
creates a very impressive
customised shape around
the heel and ankles liner
for better hold and
maximum comfort.Ability
LevelOverviewFitA medium
to low volume fit around
the rear foot and
forefoot, average instep
height and a round toe
box.Shell Prolite True
Flex PU Memory Fit shell
with PU Memory Fit cuff,
mouldable. The advanced
heat fitting technology
of Memory Fit creates a
fully personalised shell
and cuff in minutes. The
key is Memolink, a
special additive that
improves the mouldability
and stretch
characteristics of the
plastic. The boot shell
is heated in an oven,
then the skier's foot is
placed inside the
complete boot whilst it
cools. With the foot's
natural standing
pressure, the forefoot
of the boot can expand up
to 3mm per side and the
ankle area up to 5mm per
side. True Flex is an
exclusive Atomic shell
material that means your
flex and feel remains
constant in a variety of
temperatures. So, the
boot you buy in store
feels the same on the
mountain, you don't lose
horsepower in the spring
and you don't have a boot
that you can't flex in
mid-winter.LinerMimic
Platinum with Touring
Flex Zone, mouldable.
Atomic's unique Mimic
liners use a layer of
supportive thermoformable
material in the heel,
ankle and tongue areas.
After being softened in
an oven, this material
mimics the precise shape
of your foot, and
hardens in that shape for
a perfect custom fit. In
addition there is heat
mouldable foam in the
tongue, forefoot and
ankle area that can be
formed to the foot at the
same time as the Mimic
material.Key
FeaturesFree/Lock
2.0Flick from ski to walk
mode with one simple
switch. In walk mode they
offer an epic cuff
movement. In the ski
setting you can choose
13o/150/17o via the
adjustable forward
lean.Frictionless
PivotIgus polymer
bushings provide a
completely natural
movement for effortless
ascents.energy
BackboneThe energy
Backbone is a reinforced,
asymmetric backbone that
provides extra strength
for powerful skiing plus
enhanced lateral energy
transmission for better
edge grip.ProliteProlite
is a way of building skis
and boots that turns
traditional thinking on
its head. Instead of
starting with a standard
construction and cutting
material away to save
weight, Prolite does the
opposite. It starts with
the slimmest possible
profile and then it
builds up reinforcements
in key areas where
strength is
needed.SpecificationCategory:
BackcountryFlex: 115Last
Width: 98-102Custom
Shell: YesCustom Liner:
YesPower Strap: Quick
Release Cam 50mmVolume:
Medium-LowClips: 4 x
6000-Series Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Free/Lock 4.0Range
of Motion: 54Weight (g):
1458 (1/2 pair size
24.0)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£371.00
Available
-
The innovative TLT 7 is
Dynafit's latest model as
they keep one step ahead
of the competition. The
radical Speed Nose
removes the toe lug,
giving the boot even more
efficient movement, in
or out of bindings.
Weight is saved too, but
not at the expense of
control as the Titan
Lambda Frame provides
power. The excellent
Ultralock 3.0 system
works with one buckle to
open, close and adjust.
Availability: In Stock
£360.00
Archived Product
-
An alpine touring boot
that emphasises downhill
control and security,
while keeping an eye on
weight and comfort. The
light, supportive Apilon
shell has two buckles and
a power strap on the cuff
ensure instant response,
and the Cordura inner
boot is superbly designed
for all-day comfort and
warmth.
Availability: In Stock
£129.99
Available
-
Is a boot geared more for
the climb or for the
descent? This common
dilemma is finally a
thing of the past because
the Hoji has turned the
question of 'either-or'
into simply 'and'. Thanks
to the clever Hoji-Lock
system, there's a direct
connection between cuff
and shell. The result is
the power and rigidity of
a pure-bred alpine boot
on the downhill, blended
with maximum freedom of
movement, flexibility
and comfort on the
climb.Ability
LevelOverviewFitLow
volume lower leg, medium
volume around heel and
ankle with generous
instep and forefoot
space.Shell Grilamid
shell and carbon-loaded
Grilamid cuff. Cabrio
design makes getting in
and out easy; Grilamid
plastic ensures a
consistent performance
whatever the temperature
– no
over-stiffening at low
temperatures.LinerCustom
light, mouldable.
Lightweight and heat
moulded in store for the
best possible fit,
comfort and
performance.Key
FeaturesHoji Lock
SystemInnovative ski/walk
mode that creates and
impressive range of
motion for hiking and
skinning and also a
super-secure lock for
powerful skiing. Utilised
via a simple 1 lever
system that also releases
the tension on the cuff
buckle and
powerstrap.Ultralock
PowerstrapOne motion for
tensioning and one for
releasing, simple and
convenient.Anklestrap
BuckleSituated for the
best foot hold and
comfort, designed so
that it can be easily
tightened or released,
as well as
micro-adjusted, with
just one hand.Speed NoseA
shortened toe on the boot
reduces weight by 15%
whilst also enabling a
more efficient
roll-through by the
foot.Rear SpoilerStandard
forward lean is 11o, the
addition of the Grilamid
Spoiler increases this to
15o.SpecificationCategory:
BackcountryFlex: 120Last
Width: 103.5Custom Shell:
noCustom Liner: yesPower
Strap: CinchVolume:
medium-highClips: Sole
Unit: Non CertifiedPin
Inserts: YesHike Mode:
yesRange Of Motion:
55Weight (g): 1450Binding
Compatibility: Pin
Availability: In Stock
£406.00
Available
-
Charge down and climb
back up, the all new
Shift Pro is a versatile
boot that is as happy
running laps from lifts
as it is hiking to earn
the goods. The shape is
based on the successful
S/Pro so it has a
comfortable medium volume
fit. This can be
fine-tuned with Salomon's
excellent Custom Shell HD
mouldable shell and the
pre-shaped, seamless
Custom Fit 3D liner that
is moulded to the skier's
foot during fitting.
Coreframe construction
ensures lightness and
provides power; the
Surelock ski/walk system
is secure and simple with
a 40° range of
motion.Ability
LevelOverviewFitSnug rear
foot with generous room
around the forefoot, the
instep height is average
to high and the toe shape
is rounded.Shell Polyamid
and Polyolefin cuff, PU
clog, Custom Shell HD,
mouldable. Durable and
light with a true alpine
flex when skiing. The
Custom Shell HD process
aims to bring fast
personalisation to
the shell of your boots
in just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
The shell is reinforced
with Coreframe. A women's
specific cuff design uses
lower rear support for a
better fit and comfort in
the calf area.LinerMy
CustomFit 3D Seamless Pro
with walk function,
mouldable. This Seamless
Pro liner features a
softer part which bends
easily to follow the
natural movement of the
leg while walking. This
is a women's specific
liner with an anatomic
tongue made of highly
mouldable foams to
provide better shin and
instep comfort in
sensitive foot zones.Key
FeaturesCoreframeThe
Coreframe is an insert
that guarantees the
boot's stiffness after
the Custom Shell HD
process. It brings
lightness, enhances
sensations and increases
power.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Sensifit
InsertsThe soft PU
Sensifit insert on the
external side of the
shell makes it super easy
to get in the boot,
delivering comfy step-in
and anatomical wrapping
of the instep.360° 45mm
PowerstrapA thick 45mm
strap to hold the foot
securely and optimize
power
transmission.Riveted
Oversized PivotsThe
Riveted Oversized Pivot
ensures perfect power
transmission between cuff
and shell.3D BuckleChoose
from 3 different
positions of the instep
buckle for optimum
in-step comfort, full
customisation and
personalised foot
hold.SpecificationCategory:
BackcountryFlex: 110Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Velcro
45mmVolume:
Medium-HighClips: 4 x
Riveted Aluminium,
Microadjustable (1 x 3D),
2 Hiking HooksSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Surelock
skiwalkRange of Motion:
40Weight (g): 1548 (1/2
pair size 24.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£276.00
Available
-
Is a boot geared more for
the climb or for the
descent? This common
dilemma is finally a
thing of the past because
the Hoji has turned the
question of 'either-or'
into simply 'and'. Thanks
to the clever Hoji-Lock
system, there's a direct
connection between cuff
and shell. The result is
the power and rigidity of
a pure-bred alpine boot
on the downhill, blended
with maximum freedom of
movement, flexibility
and comfort on the
climb.Ability
LevelOverviewFitLow
volume lower leg, medium
volume around heel and
ankle with generous
instep and forefoot
space.Shell Grilamid
shell and carbon-loaded
Grilamid cuff. Cabrio
design makes getting in
and out easy; Grilamid
plastic ensures a
consistent performance
whatever the temperature
– no
over-stiffening at low
temperatures.LinerCustom
light, mouldable.
Lightweight and heat
moulded in store for the
best possible fit,
comfort and
performance.Key
FeaturesHoji Lock
SystemInnovative ski/walk
mode that creates and
impressive range of
motion for hiking and
skinning and also a
super-secure lock for
powerful skiing. Utilised
via a simple 1 lever
system that also releases
the tension on the cuff
buckle and
powerstrap.Ultralock
PowerstrapOne motion for
tensioning and one for
releasing, simple and
convenient.Anklestrap
BuckleSituated for the
best foot hold and
comfort, designed so
that it can be easily
tightened or released,
as well as
micro-adjusted, with
just one hand.Speed NoseA
shortened toe on the boot
reduces weight by 15%
whilst also enabling a
more efficient
roll-through by the
foot.Rear SpoilerStandard
forward lean is 11o, the
addition of the Grilamid
Spoiler increases this to
15o.SpecificationCategory:
BackcountryFlex: 120Last
Width: 103.5Custom Shell:
noCustom Liner: yesPower
Strap: CinchVolume:
medium-highClips: Sole
Unit: Non CertifiedPin
Inserts: YesHike Mode:
yesRange Of Motion:
55Weight (g): 1450Binding
Compatibility: Pin
Availability: In Stock
£464.00
Available
-
Is a boot geared more for
the climb or for the
descent? This common
dilemma is finally a
thing of the past because
the Hoji has turned the
question of 'either-or'
into simply 'and'. Thanks
to the clever Hoji-Lock
system, there's a direct
connection between cuff
and shell. The result is
the power and rigidity of
a pure-bred alpine boot
on the downhill, blended
with maximum freedom of
movement, flexibility
and comfort on the climb.
Availability: In Stock
£585.00
Available
-
The Strider 130 allows
you to fully explore the
mountain whether using
lifts or hiking for extra
vert. Tri-Fit
Customisation uses an
infra-red ready shell
that can be easily
expanded, screw-in
components for simple
changes and a 3D Custom
Cork mouldable liner with
PrimaLoft for warmth and
durability. The
exceptional fit and
comfort is matched by the
performance: 46° range
of motion aids ascents,
the lightweight cuff and
Tri Force construction
ensure power without
excess weight and
Michelin Grip Walk soles
improve traction.Ability
LevelOverviewFitA snug
fit on the rear foot with
generous forefoot width
and a medium to high
instep.Shell Carbon Triax
cuff, Infrared PU clog,
mouldable. Lightweight
athletic equipment is
fundamentally important,
so Nordica have developed
a shell specific to the
challenges associated
with a product this
light. The Tri-Force
Frame is a remarkable
concept, using an
anatomical shell design
that channels energy
through the body of the
boot to the edges of your
skis. A combination of
harder plastics at the
spine and chassis, and
softer plastics around
the foot and instep,
allows nimble and precise
movements while
maintaining the highest
level of comfort.
Infrared technology uses
an infrared lamp and a
vacuum system for precise
and safe customisation
where extra work is
needed on a shell.Liner3D
Cork Fit Primaloft Light,
mouldable. engineered
with the combination of a
natural cork compound and
an anatomical pre-shaped
3D laminate, Custom Cork
liners create the perfect
balance between comfort
and performance while
being completely
customisable.Key
FeaturesWeather ShieldThe
Weather Shield is an
overlap system integrated
into the shell that
provides a full
waterproof feature to
prevent water from
leaking into the boot.
And as we all know, dry
feet are warm and
comfortable feet!Feather
Lock Hike/Ski
MechanismThe Feather Lock
system creates a 46o
range of motion yet when
locked-out in ski mode,
its spine delivers
unprecedented power and
precision for the ride
down.Michelin GripWalk
SolesGripWalk soles offer
rocker and grip for
comfortable hiking;
Michelin compounds
increase the durability
and
traction.SpecificationCategory:
BackcountryFlex: 130Last
Width: 100Custom Shell:
noCustom Liner: yesPower
Strap: Velcro 45mmVolume:
mediumClips: Sole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
yesRange Of Motion:
46Weight (g): 1910Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£390.00
Available
-
Is a boot geared more for
the climb or for the
descent? This common
dilemma is finally a
thing of the past because
the Hoji has turned the
question of 'either-or'
into simply 'and'. Thanks
to the clever Hoji-Lock
system, there's a direct
connection between cuff
and shell. The result is
the power and rigidity of
a pure-bred alpine boot
on the downhill, blended
with maximum freedom of
movement, flexibility
and comfort on the
climb.Ability
LevelOverviewFitLow
volume lower leg, medium
volume around heel and
ankle with generous
instep and forefoot
space.Shell Grilamid
shell and carbon-loaded
Grilamid cuff. Cabrio
design makes getting in
and out easy; Grilamid
plastic ensures a
consistent performance
whatever the temperature
– no
over-stiffening at low
temperatures.LinerCustom
light, mouldable.
Lightweight and heat
moulded in store for the
best possible fit,
comfort and
performance.Key
FeaturesHoji Lock
SystemInnovative ski/walk
mode that creates and
impressive range of
motion for hiking and
skinning and also a
super-secure lock for
powerful skiing. Utilised
via a simple 1 lever
system that also releases
the tension on the cuff
buckle and
powerstrap.Ultralock
PowerstrapOne motion for
tensioning and one for
releasing, simple and
convenient.Anklestrap
BuckleSituated for the
best foot hold and
comfort, designed so
that it can be easily
tightened or released,
as well as
micro-adjusted, with
just one hand.Speed NoseA
shortened toe on the boot
reduces weight by 15%
whilst also enabling a
more efficient
roll-through by the
foot.Rear SpoilerStandard
forward lean is 11o, the
addition of the Grilamid
Spoiler increases this to
15o.SpecificationCategory:
BackcountryFlex: 120Last
Width: 103.5Custom Shell:
noCustom Liner: yesPower
Strap: CinchVolume:
medium-highClips: Sole
Unit: Non CertifiedPin
Inserts: YesHike Mode:
yesRange Of Motion:
55Weight (g): 1450Binding
Compatibility: Pin
Availability: In Stock
£406.00
Available
-
The Hawx Ultra XTD 115 W
has the power and feel of
a freeride boot thanks to
Prolite construction and
True Flex plastic, but
also the lightness of a
proper tour model. The
range of motion is an
impressive 54°, making
ascents more comfortable;
the Free/Lock 2.0 is an
easy and effective walk
mode that is solid when
locked in to ski
position. Atomic's Memory
Fit customisable shell
can be heat moulded
during fitting, adding
4mm extra width if
needed. The totally new
Mimic liner technology
creates a very impressive
customised shape around
the heel and ankles liner
for better hold and
maximum comfort.Ability
LevelOverviewFitA medium
to low volume fit around
the rear foot and
forefoot, average instep
height and a round toe
box.Shell Prolite True
Flex PU Memory Fit shell
with PU Memory Fit cuff,
mouldable. The advanced
heat fitting technology
of Memory Fit creates a
fully personalised shell
and cuff in minutes. The
key is Memolink, a
special additive that
improves the mouldability
and stretch
characteristics of the
plastic. The boot shell
is heated in an oven,
then the skier's foot is
placed inside the
complete boot whilst it
cools. With the foot's
natural standing
pressure, the forefoot
of the boot can expand up
to 3mm per side and the
ankle area up to 5mm per
side. True Flex is an
exclusive Atomic shell
material that means your
flex and feel remains
constant in a variety of
temperatures. So, the
boot you buy in store
feels the same on the
mountain, you don't lose
horsepower in the spring
and you don't have a boot
that you can't flex in
mid-winter.LinerMimic
Platinum with Touring
Flex Zone, mouldable.
Atomic's unique Mimic
liners use a layer of
supportive thermoformable
material in the heel,
ankle and tongue areas.
After being softened in
an oven, this material
mimics the precise shape
of your foot, and
hardens in that shape for
a perfect custom fit. In
addition there is heat
mouldable foam in the
tongue, forefoot and
ankle area that can be
formed to the foot at the
same time as the Mimic
material.Key
FeaturesFree/Lock
2.0Flick from ski to walk
mode with one simple
switch. In walk mode they
offer an epic cuff
movement. In the ski
setting you can choose
13o/150/17o via the
adjustable forward
lean.Frictionless
PivotIgus polymer
bushings provide a
completely natural
movement for effortless
ascents.energy
BackboneThe energy
Backbone is a reinforced,
asymmetric backbone that
provides extra strength
for powerful skiing plus
enhanced lateral energy
transmission for better
edge grip.ProliteProlite
is a way of building skis
and boots that turns
traditional thinking on
its head. Instead of
starting with a standard
construction and cutting
material away to save
weight, Prolite does the
opposite. It starts with
the slimmest possible
profile and then it
builds up reinforcements
in key areas where
strength is
needed.SpecificationCategory:
BackcountryFlex: 115Last
Width: 98-102Custom
Shell: YesCustom Liner:
YesPower Strap: Quick
Release Cam 50mmVolume:
Medium-LowClips: 4 x
6000-Series Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Free/Lock 4.0Range
of Motion: 54Weight (g):
1458 (1/2 pair size
24.0)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£530.00
Available
-
Arc'teryx never just
follow the pack and this
boot proves the point:
exceptionally light,
extraordinarily adaptable
and impressively precise.
A 3600 rotating cuff
moves laterally and
vertically for control
and comfort when
skinning, climbing or
walking. The supportive
spine and clever Hybrid
Closure system provide
the power and control
when skiing; The full
water-resistant,
snow-proof gaiter and
thermoformable eVA liner
increase warmth and
comfort.
Availability: In Stock
£264.00
Archived Product
-
The womens specific Gea
was new last season and
proved an instant hit
with its light weight,
great fit and remarkable
performance. The
anatomical shape
increases comfort and
sensitivity, whilst
improving the power
transmission. An
Intuition liner provides
the best possible custom
fit and keeps the weight
down. The cuff is
ventilated for drier,
more comfortable liners
and the walk mode is
truly impressive in its
range of movement. Its
the perfect partner to
any touring binding.
Availability: In Stock
£440.00
Available
-
The Strider 120 allows
you to fully explore the
mountain whether using
lifts or hiking for extra
vert. Tri-Fit
Customisation uses an
infra-red ready shell
that can be easily
expanded, screw-in
components for simple
changes and a 3D Custom
Cork mouldable liner with
PrimaLoft for warmth and
durability. The
exceptional fit and
comfort is matched by the
performance: 46o range of
motion aids ascents, the
lightweight cuff and Tri
Force construction ensure
power without excess
weight and Michelin Grip
Walk soles improve
traction.
Availability: In Stock
£336.00
Archived Product
Fit: medium volume,
good heel hold and roomy
toebox, custom moulded
foot
shape.
Early
Availability: In Stock
£360.00
Archived Product
Is this the ultimate
freeride tour boot for
performance skiers? It
has the power to
drive
Availability: In Stock
£750.00
Available
-
K2's Mindbender 90
Alliance suits all
mountain and freeride
skiers looking for a
versatile boot that has
an easy to manage flex
and a medium fit. The
Powerlock Spyne walk
mechanism creates a 50°
range of motion for
hiking and provides a
powerful connection when
skiing. The Powerlite
shell is light and
responsive and can be
heat moulded to create a
custom fit; the LuxFit
Pro Tour liner is moulded
in store too, further
improving comfort and
foot hold.Ability
LevelOverviewFitA
slightly lower than
average fit across the
forefoot width with most
other areas fitting more
towards average.Shell TPU
Powerlite Shell,
mouldable. This totally
new shell is
purpose-built to result
in the best skiing,
lightest boots produced.
Made with 4 different
stiffnesses of TPU and
optimised wall thickness
profiling, the Powerlite
Shell manages to achieve
a tricky balance between
lightweight agility and
power. The end product,
some of the lightest
boots on the market that
ski with all the power
and drive of heavier
models. Rounded out with
FastFit ease of entry and
full TPU boot fitter
customisation
capabilities.LinerLuxeFit
Pro Tour, mouldable.
Pre-moulded and lasted
with Ultralon
heat-mouldable foam.
Features pre-moulded
ankle pockets and a
medium density collar and
foam package with a flex
notch for increased range
of motion when hiking.Key
FeaturesPowerlock
SpyneRugged, precise and
intuitive. The Powerlock
Spyne walk mechanism
allows for 50 degree
range of motion when
hiking and an
unforgiving, powerful
connection while skiing.
The mechanism can also be
adjusted to customize the
forward lean of the boot
between 10-17°.Fast Fit
entrySofter TPU designed
into the instep area of
Powerlite shell for quick
and easy entry and
exit.Friction Free
PivotLow friction cuff
pivot to ease range of
motion.GripWalk
OutsolesRemovable and
interchangeable ISO 9523
alpine rockered soles
collaboratively designed
to work with Marker's
GripWalk binding system
for better grip and added
comfort when walking and
standing in boots, but
doesn't compromise the
power transmission and
release function between
the boot and binding when
skiingSpecificationCategory:
BackcountryFlex: 90Last
Width: 98-104Custom
Shell: NoCustom Liner:
YesPower Strap: Velcro
40mmVolume:
Medium-LowClips: 4 x
Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Powerlock
SpyneRange of Motion:
50Weight (g): 1600 (1/2
pair size 24.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£283.50
Available
-
Arc'teryx never just
follow the pack and this
boot proves the point:
exceptionally light,
extraordinarily adaptable
and impressively precise.
A 3600 rotating cuff
moves laterally and
vertically for control
and comfort when
skinning, climbing or
walking. The supportive
spine and clever Hybrid
Closure system provide
the power and control
when skiing; The full
water-resistant,
snow-proof gaiter and
thermoformable eVA liner
increase warmth and
comfort.
Availability: In Stock
£264.00
Available
-
This is the perfect
option for ski tourers
with high volume feet
who've previously
struggled to get
comfortable AT boots.
Grilamid construction is
lightweight for the way
up but provides plenty of
power on the way down.
Powerlite technology
means an impressive 60o
of articulation. A simple
yet effective Rear Hook
ski/walk mechanism
requires minimal effort
yet is strong and
dependable. The mouldable
PWR Lite High liner
improves the fit and
comfort; full length
Vibram soles increase
grip.Ability
LevelOverviewFitAverage
rear foot volume with a
higher volume forefoot
and generous over the
instep. Shell Grilamid
Powerlite shell and cuff,
mouldable. Powerlite
boots are built
from Grilamid, making
them stiffer, lighter,
and thinner than other
lightweight shells. The
Powerlite Frame uses
reinforcing ribs
throughout the shell and
cuff to give maximum
rigidity while
maintaining their light
weight. The result is
precise, solid and
secure skiing with
instant comfort. 3 piece
or cabrio design uses a
shell, cuff and separate
tongue for improved range
of motion, comfort and
ease of
entry/exit.LinerPWR Lite
High, mouldable.
Lightweight, warm and
custom moulded for the
best possible fit.Key
FeaturesRear Hook
Ski/Walk Mechanismeasy to
operate, the new
POWeRLIT rear hook
mechanism combines
strength and stability in
ski mode with total
freedom when skinning or
walking. This next
generation hook mechanism
locks automatically when
downhill
skiing. Full-Length
Vibram Bi-Density
RubberFull-length Vibram
bi-density rubber under
the instep area provides
maximum grip when
scrambling over any
terrain that isn't snow.
The bi-density
composition has firmer
black rubber around the
sole's perimeter to
provide durability and
superior edging power in
step-in bindings. Softer
red rubber in the sole's
midsection gives maximum
grip for scrambling.Shock
Damper InsertsShock
Damper Inserts are
expanded PU foam inserts
in the shell's inner sole
that act as a shock
absorber when skiing,
and add insulation,
comfort, and increased
ski feel.Lock
CatchesScott's Locking
Buckle Catches keep the
buckle bails in place
when the buckles are
opened for
hiking.Adjustable
SpoilerAn Asymmetric
Spoiler provides medial
and rearward
support.SpecificationCategory:
BackcountryFlex: 115Last
Width: 103.5Custom Shell:
noCustom Liner: yesPower
Strap: VelcroVolume:
highClips: Sole Unit:
Tour (ISO 9523)Pin
Inserts: YesHike Mode:
yesRange Of Motion:
60Weight (g): 1425Binding
Compatibility: Multi
Norm, PinCert, Pin
Availability: In Stock
£285.00
Archived Product
Drawing on their
ski-running and
speedtouring experience,
Dynafit have created a
ski touring
Availability: In Stock
£420.00
Available
-
Salomon's S/LAB MTN
impresses both freeriders
and tourers thanks to
remarkable comfort on the
way up and no-compromise
performance on the way
down. A Pebax cuff and
Grilamid+ shell keep
weight low and deliver
precise control.
Oversized pivots,
Sensifit Shell and BC
Carbon Spine all help to
beef up the power without
adding valuable grams.
The fully mouldable liner
and shell ensure the best
possible fit; 47 degrees
of motion boosts walking
ease and Contragrip soles
improve grip.Ability
LevelOverviewFitGrippy
heel pocket, medium
instep with average to
narrow forefoot and
angular tapered toe
box.Shell Pebax cuff,
Grilamid clog, Custom
Shell HD, mouldable.
High-quality polyamide
plastic which provides
adapted rigidity,
lightness and downhill
performance. The Custom
Shell HD process aims to
bring fast
personalisation to
the shell of your boots
in just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
Uses a Carbon Spine
touring design for light
yet strong and stiff rear
support when
skiing.LinerMy CustomFit
3D Freetouring,
mouldable. A new material
pattern creates a more
inclusive fit, avoiding
pressure points and a new
foam construction ensures
lightness and comfort.Key
Features2 Riveted Light
and Lock System
BucklesThe buckle
situated on the cuff
offers a specific tooth
that keeps the cuff
closed while offering
great range of motion
when skinning or walking
up.Motion FlexTouring
cuff construction with a
spine made of carbon and
composite fibre. It
allows a high range of
motion when skinning
while guaranteeing a true
and progressive alpine
flex.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Dual Claw
50mm PowerstrapInspired
by racing and designed to
ensure maximum power
transmission, this strap
is made with a claw
system to allow for low
elasticity and provide
better leg hold.Contagrip
Rubber SoleGripWalk pads
are pre-mounted and their
specific shape improves
walking comfort and grip
whatever the
conditions.SpecificationCategory:
BackcountryFlex: 120Last
Width: 98-104Custom
Shell: YesCustom Liner:
YesPower Strap: Dual Claw
50mmVolume:
Medium-LowClips: 2 x
Riveted Light,
MicroadjuastableSole
Unit: Tour (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Surelock
skiwalkRange of Motion:
47Weight (g): 1570 (1/2
pair size 26.5)Binding
Compatibility: Multi
Norm, PinCert, Pin
Availability: In Stock
£520.00
Available
-
The R3 110 T.I. offers
freeride performance
without a super stiff
flex, or the associated
high price. It's stacked
with clever design and
features that ensure a
smooth flexing boot that
can be totally customised
and will hold the foot
securely and comfortably.
The Cabrio design creates
a very progressive flex;
the clever buckling holds
the heel in place
effectively and works
well with the cable
system to make a perfect
fit. The shell uses
pre-formed shapes in
sensitive areas and can
be custom fitted, as can
the Intuition tongue
liner. Ability Level
Overview Fit A snug rear
foot and a medium to high
volume fit in the
forefoot, cabrio
construction gives some
flexibility for height
over the instep. Shell
3-Piece Cabrio Design,
Grilamid / PU+ (Desmopan
900), mouldable. A
unique technology
utilises a 3-piece
construction
(shell/cuff/tongue) that
comfortably secures the
foot and lower leg while
optimizing smooth and
progressive flexibility.
Cabrio boots are
extremely versatile and
reall...
Availability: In Stock
£490 GBP
Archived Product
Fit: medium volume,
good heel hold and roomy
toebox, custom moulded
foot shape
Early
Availability: In Stock
£330.00
Archived Product
-
The innovative V.I.R.U.S.
Tour ID is packed with
clever features that make
it stand out from the
crowd. The Cabrio design
uses a 3-piece
construction with a
patented hinging tongue,
this improves the
glide/stride range of
motion forwards and back
and also creates a low
cuff hinge for a natural
flex when skiing. The PU
shell is responsive and
precise; the ID liner is
light and comfortable,
and the rockered sole
uses tech inserts and
Vibram rubber.
Availability: In Stock
£356.25
Available
-
The R3 110 T.I. offers
freeride performance
without a super stiff
flex, or the associated
high price. It's stacked
with clever design and
features that ensure a
smooth flexing boot that
can be totally customised
and will hold the foot
securely and comfortably.
The Cabrio design creates
a very progressive flex;
the clever buckling holds
the heel in place
effectively and works
well with the cable
system to make a perfect
fit. The shell uses
pre-formed shapes in
sensitive areas and can
be custom fitted, as can
the Intuition tongue
liner. Ability Level
Overview Fit A snug rear
foot and a medium to high
volume fit in the
forefoot, cabrio
construction gives some
flexibility for height
over the instep. Shell
3-Piece Cabrio Design,
Grilamid / PU+ (Desmopan
900), mouldable. A
unique technology
utilises a 3-piece
construction
(shell/cuff/tongue) that
comfortably secures the
foot and lower leg while
optimizing smooth and
progressive flexibility.
Cabrio boots are
extremely versatile and
really shine in varied
terrain and snow
conditions. Grilamid is a
state-of-the-art
technical polymer. It is
lightweight, durable and
unaffected by cold
temperatures where other
plastic can over-stiffen.
BioFit CM can be custom
moulded during fitting.
Liner I.R. Tongue Liner,
mouldable. This liner was
specifically designed in
coordination with
Intuition to integrate
with the R3 platform
models. EVA, flex notch
gussets and 100% heat
mouldable construction
provides outstanding fit,
warmth and ultralight
weight. The I.R. Tongue
Liner is the best of the
best. Key Features Next
Gen Design Use of
advanced CAD design
technology, 3D printed
prototyping, and
cutting-edge ultralight
polymers achieves minimal
form with outstanding
strength-to-weight ratio.
GripWalk Outsoles
High-profiled
slip-resistant sole.
Increases walking comfort
and improves natural roll
thanks to curved rubber
sole. Powerstrap Buckle
Powerstrap allows for
excellent boot top
closure as well as
accommodating any leg
shape. Easy stride buckle
function extends stride
range when opened in the
walk phase. Easy Ski-Hike
Mechanism Stout hike
mechanism allows easy
release of the upper
cuff. Specification
Category: Backcountry
Flex: 110 Last Width:
99-101 Custom Shell: Yes
Custom Liner: Yes Power
Strap: Cam 50mm Volume:
Medium Clips: Powerstrap
Buckle with Easy Stride,
2 x Aluminium,
Microadjustable Sole
Unit: Grip Walk (ISO
9523) Pin Inserts: Yes
Hike Mode: Yes, with
Open Throat Shell and
Freetour Tongue Range of
Motion: 45 Weight (g):
1600 (1/2 pair size 26.5)
Binding Compatibility:
Grip Walk, Multi Norm,
PinCert, Pin
Availability: In Stock
£490 GBP
Available
-
The R3 110 T.I. offers
freeride performance
without a super stiff
flex, or the associated
high price. It's stacked
with clever design and
features that ensure a
smooth flexing boot that
can be totally customised
and will hold the foot
securely and comfortably.
The Cabrio design creates
a very progressive flex;
the clever buckling holds
the heel in place
effectively and works
well with the cable
system to make a perfect
fit. The shell uses
pre-formed shapes in
sensitive areas and can
be custom fitted, as can
the Intuition tongue
liner. Ability Level
Overview Fit A snug rear
foot and a medium to high
volume fit in the
forefoot, cabrio
construction gives some
flexibility for height
over the instep. Shell
3-Piece Cabrio Design,
Grilamid / PU+ (Desmopan
900), mouldable. A
unique technology
utilises a 3-piece
construction
(shell/cuff/tongue) that
comfortably secures the
foot and lower leg while
optimizing smooth and
progressive flexibility.
Cabrio boots are
extremely versatile and
reall...
Availability: In Stock
£490 GBP
Available
-
The R3 110 T.I. offers
freeride performance
without a super stiff
flex, or the associated
high price. It's stacked
with clever design and
features that ensure a
smooth flexing boot that
can be totally customised
and will hold the foot
securely and comfortably.
The Cabrio design creates
a very progressive flex;
the clever buckling holds
the heel in place
effectively and works
well with the cable
system to make a perfect
fit. The shell uses
pre-formed shapes in
sensitive areas and can
be custom fitted, as can
the Intuition tongue
liner. Ability Level
Overview Fit A snug rear
foot and a medium to high
volume fit in the
forefoot, cabrio
construction gives some
flexibility for height
over the instep. Shell
3-Piece Cabrio Design,
Grilamid / PU+ (Desmopan
900), mouldable. A
unique technology
utilises a 3-piece
construction
(shell/cuff/tongue) that
comfortably secures the
foot and lower leg while
optimizing smooth and
progressive flexibility.
Cabrio boots are
extremely versatile and
really shine in varied
terrain and snow
conditions. Grilamid is a
state-of-the-art
technical polymer. It is
lightweight, durable and
unaffected by cold
temperatures where other
plastic can over-stiffen.
BioFit CM can be custom
moulded during fitting.
Liner I.R. Tongue Liner,
mouldable. This liner was
specifically designed in
coordination with
Intuition to integrate
with the R3 platform
models. EVA, flex notch
gussets and 100% heat
mouldable construction
provides outstanding fit,
warmth and ultralight
weight. The I.R. Tongue
Liner is the best of the
best. Key Features Next
Gen Design Use of
advanced CAD design
technology, 3D printed
prototyping, and
cutting-edge ultralight
polymers achieves minimal
form with outstanding
strength-to-weight ratio.
GripWalk Outsoles
High-profiled
slip-resistant sole.
Increases walking comfort
and improves natural roll
thanks to curved rubber
sole. Powerstrap Buckle
Powerstrap allows for
excellent boot top
closure as well as
accommodating any leg
shape. Easy stride buckle
function extends stride
range when opened in the
walk phase. Easy Ski-Hike
Mechanism Stout hike
mechanism allows easy
release of the upper
cuff. Specification
Category: Backcountry
Flex: 110 Last Width:
99-101 Custom Shell: Yes
Custom Liner: Yes Power
Strap: Cam 50mm Volume:
Medium Clips: Powerstrap
Buckle with Easy Stride,
2 x Aluminium,
Microadjustable Sole
Unit: Grip Walk (ISO
9523) Pin Inserts: Yes
Hike Mode: Yes, with
Open Throat Shell and
Freetour Tongue Range of
Motion: 45 Weight (g):
1600 (1/2 pair size 26.5)
Binding Compatibility:
Grip Walk, Multi Norm,
PinCert, Pin
Availability: In Stock
£490 GBP
Available
-
The R3 110 T.I. offers
freeride performance
without a super stiff
flex, or the associated
high price. It’s
stacked with clever
design and features that
ensure a smooth flexing
boot that can be totally
customised and will hold
the foot securely and
comfortably. The Cabrio
design creates a very
progressive flex; the
clever buckling holds the
heel in place effectively
and works well with the
cable system to make a
perfect fit. The shell
uses pre-formed shapes in
sensitive areas and can
be custom fitted, as can
the Intuition tongue
liner.
Availability: In Stock
£450 GBP
Available
-
Roxa are quietly making a
name for themselves with
the excellent R3
Ultralight range and this
latest version of the R3
130 T.I. is sure to
continue this. It's a
powerful freeride boot
that really does flex
like a 130 alpine model.
The Cabrio design uses a
3-piece construction of
shell, cuff and tongue
that comfortably and
securely holds the foot
whilst producing a smooth
and progressive flex.
This open throat design
ensures easy entry and
exit and means high shell
walls can be used to
provide excellent power
transmission, without
making the boot over
stiff. Grilamid on the
shell and cuff mean the
weight is kept down
without affecting
performance. The shell
utilises Biofit
technology, these are
preformed shapes in
common problem areas at
the 1st and 5th
metatarsal heads, ankle
and navicular, to ease
pressure and create a
natural feel. To improve
on this the shell can be
heat moulded for a better
fit, and the liner is
the brilliant Intuition
tongue version that is
formed during fitting to
take the best shape of
the skier's feet. Ability
Level Overview Fit A snug
rear foot and a medium to
high volume fit in the
forefoot, cabrio
construction gives some
flexibility for height
over the instep. Shell
3-Piece Cabrio Design,
Grilamid, mouldable. A
unique technology
utilises a 3-piece
construction
(shell/cuff/tongue) that
comfortably secures the
foot and lower leg while
optimizing smooth and
progressive flexibility.
Cabrio boots are
extremely versatile and
really shine in varied
terrain and snow
conditions. Grilamid is a
state-of-the-art
technical polymer. It is
lightweight, durable and
unaffected by cold
temperatures where other
plastic can over-stiffen.
Liner I.R. Tongue Liner,
mouldable. This liner was
specifically designed in
coordination with
Intuition to integrate
with the R3 platform
models. EVA, flex notch
gussets and 100% heat
mouldable construction
provides outstanding fit,
warmth and ultralight
weight. The I.R. Tongue
Liner is the best of the
best. Key Features Next
Gen Design Use of
advanced CAD design
technology, 3D printed
prototyping, and
cutting-edge ultralight
polymers achieves minimal
form with outstanding
strength-to-weight ratio.
R.R.I. Chassis Tuning The
Dynamic Response Insert
shortens the range of
flex while still
providing excellent shock
absorption. The result is
lightening quick response
and power for outstanding
all mountain performance.
GripWalk Outsoles
High-profiled
slip-resistant sole.
Increases walking comfort
and improves natural roll
thanks to curved rubber
sole. Powerstrap Buckle
Powerstrap allows for
excellent boot top
closure as well as
accommodating any leg
shape. Easy stride buckle
function extends stride
range when opened in the
walk phase. Easy Ski-Hike
Mechanism Stout hike
mechanism allows easy
release of the upper
cuff. Specification
Category: Backcountry
Flex: 130 Last Width:
99-101 Custom Shell: Yes
Custom Liner: Yes Power
Strap: Cam 50mm Volume:
Medium Clips: Powerstrap
Buckle with Easy Stride,
2 x Aluminium,
Microadjustable Sole
Unit: Grip Walk (ISO
9523) Pin Inserts: Yes
Hike Mode: Yes, with
Open Throat Shell and
Freetour Tongue Range of
Motion: 45 Weight (g):
1520 (1/2 pair size 26.5)
Binding Compatibility:
Grip Walk, Multi Norm,
PinCert, Pin
Availability: In Stock
£530 GBP
Available
-
The R3 110 T.I. offers
freeride performance
without a super stiff
flex, or the associated
high price. It’s
stacked with clever
design and features that
ensure a smooth flexing
boot that can be totally
customised and will hold
the foot securely and
comfortably. The Cabrio
design creates a very
progressive flex; the
clever buckling holds the
heel in place effectively
and works well with the
cable system to make a
perfect fit. The shell
uses pre-formed shapes in
sensitive areas and can
be custom fitted, as can
the Intuition tongue
liner.
Availability: In Stock
£450 GBP
Available
-
The R3 110 T.I. offers
freeride performance
without a super stiff
flex, or the associated
high price. It’s
stacked with clever
design and features that
ensure a smooth flexing
boot that can be totally
customised and will hold
the foot securely and
comfortably. The Cabrio
design creates a very
progressive flex; the
clever buckling holds the
heel in place effectively
and works well with the
cable system to make a
perfect fit. The shell
uses pre-formed shapes in
sensitive areas and can
be custom fitted, as can
the Intuition tongue
liner.
Availability: In Stock
£450 GBP
Archived Product
-
Using a PU shell and
Pebax tongue, the ZZero
4 is
performance-orientated
touring boot. The
Multiform liner is tough
and hardwearing but still
comfortable and light.
The ski/walk mechanism is
simple to operate and the
Dynafit exclusive Quick
Step-in inserts ensure
hassle-free binding
entry.
Availability: In Stock
£302.56
Available
-
Roxa are quietly making a
name for themselves with
the excellent R3
Ultralight range and this
latest version of the R3
130 T.I. is sure to
continue this. It's a
powerful freeride boot
that really does flex
like a 130 alpine model.
The Cabrio design uses a
3-piece construction of
shell, cuff and tongue
that comfortably and
securely holds the foot
whilst producing a smooth
and progressive flex.
This open throat design
ensures easy entry and
exit and means high shell
walls can be used to
provide excellent power
transmission, without
making the boot over
stiff. Grilamid on the
shell and cuff mean the
weight is kept down
without affecting
performance. The shell
utilises Biofit
technology, these are
preformed shapes in
common problem areas at
the 1st and 5th
metatarsal heads, ankle
and navicular, to ease
pressure and create a
natural feel. To improve
on this the shell can be
heat moulded for a better
fit, and the liner is
the brilliant Intuition
tongue version that is
formed during fitting to
take the best shape of
the skier's feet. Ability
Level Overview Fit A snug
rear foot and a medium to
high volume fit in the
forefoot, cabrio
construction gives some
flexibility for height
over the instep. Shell
3-Piece Cabrio Design,
Grilamid, mouldable. A
unique technology
utilises a 3-piece
construction
(shell/cuff/tongue) that
comfortably secures the
foot and lower leg while
optimizing smooth and
progressive flexibility.
Cabrio boots are
extremely versatile and
really shine in varied
terrain and snow
conditions. Grilamid is a
state-of-the-art
technical polymer. It is
lightweight, durable and
unaffected by cold
temperatures where other
plastic can over-stiffen.
Liner I.R. Tongue Liner,
mouldable. This liner was
specifically designed in
coordination with
Intuition to integrate
with the R3 platform
models. EVA, flex notch
gussets and 100% heat
mouldable construction
provides outstanding fit,
warmth and ultralight
weight. The I.R. Tongue
Liner is the best of the
best. Key Features Next
Gen Design Use of
advanced CAD design
technology, 3D printed
prototyping, and
cutting-edge ultralight
polymers achieves minimal
form with outstanding
strength-to-weight ratio.
R.R.I. Chassis Tuning The
Dynamic Response Insert
shortens the range of
flex while still
providing excellent shock
absorption. The result is
lightening quick response
and power for outstanding
all mountain performance.
GripWalk Outsoles
High-profiled
slip-resistant sole.
Increases walking comfort
and improves natural roll
thanks to curved rubber
sole. Powerstrap Buckle
Powerstrap allows for
excellent boot top
closure as well as
accommodating any leg
shape. Easy stride buckle
function extends stride
range when opened in the
walk phase. Easy Ski-Hike
Mechanism Stout hike
mechanism allows easy
release of the upper
cuff. Specification
Category: Backcountry
Flex: 130 Last Width:
99-101 Custom Shell: Yes
Custom Liner: Yes Power
Strap: Cam 50mm Volume:
Medium Clips: Powerstrap
Buckle with Easy Stride,
2 x Aluminium,
Microadjustable Sole
Unit: Grip Walk (ISO
9523) Pin Inserts: Yes
Hike Mode: Yes, with
Open Throat Shell and
Freetour Tongue Range of
Motion: 45 Weight (g):
1520 (1/2 pair size 26.5)
Binding Compatibility:
Grip Walk, Multi Norm,
PinCert, Pin
Availability: In Stock
£530 GBP
Available
-
Roxa are quietly making a
name for themselves with
the excellent R3
Ultralight range and this
latest version of the R3
130 T.I. is sure to
continue this. It's a
powerful freeride boot
that really does flex
like a 130 alpine model.
The Cabrio design uses a
3-piece construction of
shell, cuff and tongue
that comfortably and
securely holds the foot
whilst producing a smooth
and progressive flex.
This open throat design
ensures easy entry and
exit and means high shell
walls can be used to
provide excellent power
transmission, without
making the boot over
stiff. Grilamid on the
shell and cuff mean the
weight is kept down
without affecting
performance. The shell
utilises Biofit
technology, these are
preformed shapes in
common problem areas at
the 1st and 5th
metatarsal heads, ankle
and navicular, to ease
pressure and create a
natural feel. To improve
on this the shell can be
heat moulded for a better
fit, and the liner is
the brilliant Intuition
tongue version that is
formed during fitting to
take the best shape of
the skier's feet. Ability
Level Overview Fit A snug
rear foot and a medium to
high volume fit in the
forefoot, cabrio
construction gives some
flexibility for height
over the instep. Shell
3-Piece Cabrio Design,
Grilamid, mouldable. A
unique technology
utilises a 3-piece
construction
(shell/cuff/tongue) that
comfortably secures the
foot and lower leg while
optimizing smooth and
progressive flexibility.
Cabrio boots are
extremely versatile and
really shine in varied
terrain and snow
conditions. Grilamid is a
state-of-the-art
technical polymer. It is
lightweight, durable and
unaffected by cold
temperatures where other
plastic can over-stiffen.
Liner I.R. Tongue Liner,
mouldable. This liner was
specifically designed in
coordination with
Intuition to integrate
with the R3 platform
models. EVA, flex notch
gussets and 100% heat
mouldable construction
provides outstanding fit,
warmth and ultralight
weight. The I.R. Tongue
Liner is the best of the
best. Key Features Next
Gen Design Use of
advanced CAD design
technology, 3D printed
prototyping, and
cutting-edge ultralight
polymers achieves minimal
form with outstanding
strength-to-weight ratio.
R.R.I. Chassis Tuning The
Dynamic Response Insert
shortens the range of
flex while still
providing excellent shock
absorption. The result is
lightening quick response
and power for outstanding
all mountain performance.
GripWalk Outsoles
High-profiled
slip-resistant sole.
Increases walking comfort
and improves natural roll
thanks to curved rubber
sole. Powerstrap Buckle
Powerstrap allows for
excellent boot top
closure as well as
accommodating any leg
shape. Easy stride buckle
function extends stride
range when opened in the
walk phase. Easy Ski-Hike
Mechanism Stout hike
mechanism allows easy
release of the upper
cuff. Specification
Category: Backcountry
Flex: 130 Last Width:
99-101 Custom Shell: Yes
Custom Liner: Yes Power
Strap: Cam 50mm Volume:
Medium Clips: Powerstrap
Buckle with Easy Stride,
2 x Aluminium,
Microadjustable Sole
Unit: Grip Walk (ISO
9523) Pin Inserts: Yes
Hike Mode: Yes, with
Open Throat Shell and
Freetour Tongue Range of
Motion: 45 Weight (g):
1520 (1/2 pair size 26.5)
Binding Compatibility:
Grip Walk, Multi Norm,
PinCert, Pin
Availability: In Stock
£530 GBP
Available
-
Roxa are quietly making a
name for themselves with
the excellent R3
Ultralight range and this
latest version of the R3
130 T.I. is sure to
continue this. It's a
powerful freeride boot
that really does flex
like a 130 alpine model.
The Cabrio design uses a
3-piece construction of
shell, cuff and tongue
that comfortably and
securely holds the foot
whilst producing a smooth
and progressive flex.
This open throat design
ensures easy entry and
exit and means high shell
walls can be used to
provide excellent power
transmission, without
making the boot over
stiff. Grilamid on the
shell and cuff mean the
weight is kept down
without affecting
performance. The shell
utilises Biofit
technology, these are
preformed shapes in
common problem areas at
the 1st and 5th
metatarsal heads, ankle
and navicular, to ease
pressure and create a
natural feel. To improve
on this the shell can be
heat moulded for a better
fit, and the liner is
the brilliant Intuition
tongue version that is
formed during fitting to
take the best shape of
the skier's feet. Ability
Level Overview Fit A snug
rear foot and a medium to
high volume fit in the
forefoot, cabrio
construction gives some
flexibility for height
over the instep. Shell
3-Piece Cabrio Design,
Grilamid, mouldable. A
unique technology
utilises a 3-piece
construction
(shell/cuff/tongue) that
comfortably secures the
foot and lower leg while
optimizing smooth and
progressive flexibility.
Cabrio boots are
extremely versatile and
really shine in varied
terrain and snow
conditions. Grilamid is a
state-of-the-art
technical polymer. It is
lightweight, durable and
unaffected by cold
temperatures where other
plastic can over-stiffen.
Liner I.R. Tongue Liner,
mouldable. This liner was
specifically designed in
coordination with
Intuition to integrate
with the R3 platform
models. EVA, flex notch
gussets and 100% heat
mouldable construction
provides outstanding fit,
warmth and ultralight
weight. The I.R. Tongue
Liner is the best of the
best. Key Features Next
Gen Design Use of
advanced CAD design
technology, 3D printed
prototyping, and
cutting-edge ultralight
polymers achieves minimal
form with outstanding
strength-to-weight ratio.
R.R.I. Chassis Tuning The
Dynamic Response Insert
shortens the range of
flex while still
providing excellent shock
absorption. The result is
lightening quick response
and power for outstanding
all mountain performance.
GripWalk Outsoles
High-profiled
slip-resistant sole.
Increases walking comfort
and improves natural roll
thanks to curved rubber
sole. Powerstrap Buckle
Powerstrap allows for
excellent boot top
closure as well as
accommodating any leg
shape. Easy stride buckle
function extends stride
range when opened in the
walk phase. Easy Ski-Hike
Mechanism Stout hike
mechanism allows easy
release of the upper
cuff. Specification
Category: Backcountry
Flex: 130 Last Width:
99-101 Custom Shell: Yes
Custom Liner: Yes Power
Strap: Cam 50mm Volume:
Medium Clips: Powerstrap
Buckle with Easy Stride,
2 x Aluminium,
Microadjustable Sole
Unit: Grip Walk (ISO
9523) Pin Inserts: Yes
Hike Mode: Yes, with
Open Throat Shell and
Freetour Tongue Range of
Motion: 45 Weight (g):
1520 (1/2 pair size 26.5)
Binding Compatibility:
Grip Walk, Multi Norm,
PinCert, Pin
Availability: In Stock
£530 GBP
Available
-
Roxa are quietly making a
name for themselves with
the excellent R3
Ultralight range and this
latest version of the R3
130 T.I. is sure to
continue this. It’s a
powerful freeride boot
that really does flex
like a 130 alpine model.
The Cabrio design uses a
3-piece construction of
shell, cuff and tongue
that comfortably and
securely holds the foot
whilst producing a smooth
and progressive flex.
This open throat design
ensures easy entry and
exit and means high shell
walls can be used to
provide excellent power
transmission, without
making the boot over
stiff. Grilamid on the
shell and cuff mean the
weight is kept down
without affecting
performance. The shell
utilises Biofit
technology, these are
preformed shapes in
common problem areas at
the 1st and 5th
metatarsal heads, ankle
and navicular, to ease
pressure and create a
natural feel. To improve
on this the shell can be
heat moulded for a better
fit, and the liner is
the brilliant Intuition
tongue version that is
formed during fitting to
take the best shape of
the skier’s feet.
Availability: In Stock
£250.00
Available
-
Roxa are quietly making a
name for themselves with
the excellent R3
Ultralight range and this
latest version of the R3
130 T.I. is sure to
continue this. It’s a
powerful freeride boot
that really does flex
like a 130 alpine model.
The Cabrio design uses a
3-piece construction of
shell, cuff and tongue
that comfortably and
securely holds the foot
whilst producing a smooth
and progressive flex.
This open throat design
ensures easy entry and
exit and means high shell
walls can be used to
provide excellent power
transmission, without
making the boot over
stiff. Grilamid on the
shell and cuff mean the
weight is kept down
without affecting
performance. The shell
utilises Biofit
technology, these are
preformed shapes in
common problem areas at
the 1st and 5th
metatarsal heads, ankle
and navicular, to ease
pressure and create a
natural feel. To improve
on this the shell can be
heat moulded for a better
fit, and the liner is
the brilliant Intuition
tongue version that is
formed during fitting to
take the best shape of
the skier’s feet.
Availability: In Stock
£250.00
Archived Product
-
Salomons Quest Pro Pebax
is built for serious
tourers and freeriders
where uphill capabilities
are as important as
downhill performance. An
ultra light thermoformed
liner, with Quicklace
system, saves weight and
offers an outstanding
out-of-the-box fit. 3
light, oversized clips
and a chunky 45mm strap
secure the fit, a Pebax
lower shell retains
excellent energy
transmission and
minimises weight, and
the powerful Backbone
release system ensures
comfortable walking and
powerful skiing.
Availability: In Stock
£300.00
Available
-
The R3 110 T.I. offers
freeride performance
without a super stiff
flex, or the associated
high price. Its stacked
with clever design and
features that ensure a
smooth flexing boot that
can be totally customised
and will hold the foot
securely and comfortably.
Availability: In Stock
£450 GBP
Available
-
Blending the comfort and
power of the proven Prime
range with the lightness
and natural movement of
the XTD and Backland
models, the Hawx Prime
XTD is where all mountain
skiing meets freeride.
Prolite construction uses
different wall
thicknesses on the shell
to keep the weight down
without affecting the
performance. The tried
and tested Free/Lock hike
and ski system provides
54deg of motion, ease of
use and, thanks to the
way it integrates the
energy Backbone, precise
ski control. Memory Fit
on the shell means it can
be heat moulded to even
more closely match the
foot shape; the special
3D Mimic Gold liner takes
an impressive mould of
the heel and ankle area
for the best comfort and
control. Comes with
GripWalk soles and tech
insoles so it can be used
with a range of
bindings.Ability
LevelOverviewFitAn
average fit on the
rearfoot with generous
forefoot width and a
medium to high
instep.Shell Prolite True
Flex PU Memory Fit shell
with PU Memory Fit cuff,
mouldable. The advanced
heat fitting technology
of Memory Fit creates a
fully personalised shell
and cuff in minutes. The
key is Memolink, a
special additive that
improves the mouldability
and stretch
characteristics of the
plastic. The boot shell
is heated in an oven,
then the skier's foot is
placed inside the
complete boot whilst it
cools. With the foot's
natural standing
pressure, the forefoot
of the boot can expand up
to 3mm per side and the
ankle area up to 5mm per
side. True Flex is an
exclusive Atomic shell
material that means your
flex and feel remains
constant in a variety of
temperatures. So, the
boot you buy in store
feels the same on the
mountain, you don't lose
horsepower in the spring
and you don't have a boot
that you can't flex in
mid-winter.LinerMimic
Gold with Touring Flex
Zone, mouldable.
Atomic's unique Mimic
liners use a layer of
supportive thermoformable
material in the heel,
ankle and tongue areas.
After being softened in
an oven, this material
mimics the precise shape
of your foot, and
hardens in that shape for
a perfect custom fit. In
addition there is heat
mouldable foam in the
tongue and ankle area
that can be formed to the
foot at the same time as
the Mimic material.Key
FeaturesFree/Lock
4.0Flick from ski to walk
mode with one simple
switch. In walk mode they
offer an epic cuff
movement. In the ski
setting you can choose
13o/150/17o via the
adjustable forward
lean.Frictionless
PivotIgus polymer
bushings provide a
completely natural
movement for effortless
ascents.energy
BackboneThe energy
Backbone is a reinforced,
asymmetric backbone that
provides extra strength
for powerful skiing plus
enhanced lateral energy
transmission for better
edge grip.ProliteProlite
is a way of building skis
and boots that turns
traditional thinking on
its head. Instead of
starting with a standard
construction and cutting
material away to save
weight, Prolite does the
opposite. It starts with
the slimmest possible
profile and then it
builds up reinforcements
in key areas where
strength is
needed.SpecificationCategory:
BackcountryFlex: 120Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Velcro
50mmVolume:
Medium-HighClips: 4 x
6000-Series Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Free/Lock 4.0Range
of Motion: 54Weight (g):
1873 (1/2 pair size
26.0)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£530.00
Archived Product
-
For freeride tourers
looking for the worlds
best balance of downhill
performance and uphill
touring comfort. The PU
shell is powerful and
precise; the ThermoFlex
liner is super-light and
custom-fitted. Comes with
Dynafit Quick Step-in ISO
tour soles and ISO Norm
soles so its compatible
with all types of alpine
and touring bindings.
Availability: In Stock
£352.34
Archived Product
-
Fit: Medium to
high volume, medium
forefoot and roomy toebox
The Quest 8 W offers
Availability: In Stock
£187.50
Archived Product
-
Fit: Medium to
high volume, medium
forefoot and roomy toebox
The Quest 10 is a
dual-role
Availability: In Stock
£300.00
Available
-
Roxa are quietly making a
name for themselves with
the excellent R3
Ultralight range and this
latest version of the R3
130 T.I. is sure to
continue this. It's a
powerful freeride boot
that really does flex
like a 130 alpine model.
The Cabrio design uses a
3-piece construction of
shell, cuff and tongue
that comfortably and
securely holds the foot
whilst producing a smooth
and progressive flex.
This open throat design
ensures easy entry and
exit and means high shell
walls can be used to
provide excellent power
transmission, without
making the boot over
stiff. Grilamid on the
shell and cuff mean the
weight is kept down
without affecting
performance. The shell
utilises Biofit
technology, these are
preformed shapes in
common problem areas at
the 1st and 5th
metatarsal heads, ankle
and navicular, to ease
pressure and create a
natural feel. To improve
on this the shell can be
heat moulded for a better
fit, and the liner is
the brilliant Intuition
tongue version that is
formed during fitting to
take the best shape of
the skier's feet. Ability
Level Overview Fit A snug
rear foot and a medium to
high volume fit in the
forefoot, cabrio
construction gives some
flexibility for height
over the instep. Shell
3-Piece Cabrio Design,
Grilamid, mouldable. A
unique technology
utilises a 3-piece
construction
(shell/cuff/tongue) that
comfortably secures the
foot and lower leg while
optimizing smooth and
progressive flexibility.
Cabrio boots are
extremely versatile and
really shine in varied
terrain and snow
conditions. Grilamid is a
state-of-the-art
technical polymer. It is
lightweight, durable and
unaffected by cold
temperatures where other
plastic can over-stiffen.
Liner I.R. Tongue Liner,
mouldable. This liner was
specifically designed in
coordination with
Intuition to integrate
with the R3 platform
models. EVA, flex notch
gussets and 100% heat
mouldable construction
provides outstanding fit,
warmth and ultralight
weight. The I.R. Tongue
Liner is the best of the
best. Key Features Next
Gen Design Use of
advanced CAD design
technology, 3D printed
prototyping, and
cutting-edge ultralight
polymers achieves minimal
form with outstanding
strength-to-weight ratio.
R.R.I. Chassis Tuning The
Dynamic Response Insert
shortens the range of
flex while still
providing excellent shock
absorption. The result is
lightening quick response
and power for outstanding
all mountain performance.
GripWalk Outsoles
High-profiled
slip-resistant sole.
Increases walking comfort
and improves natural roll
thanks to curved rubber
sole. Powerstrap Buckle
Powerstrap allows for
excellent boot top
closure as well as
accommodating any leg
shape. Easy stride buckle
function extends stride
range when opened in the
walk phase. Easy Ski-Hike
Mechanism Stout hike
mechanism allows easy
release of the upper
cuff. Specification
Category: Backcountry
Flex: 130 Last Width:
99-101 Custom Shell: Yes
Custom Liner: Yes Power
Strap: Cam 50mm Volume:
Medium Clips: Powerstrap
Buckle with Easy Stride,
2 x Aluminium,
Microadjustable Sole
Unit: Grip Walk (ISO
9523) Pin Inserts: Yes
Hike Mode: Yes, with
Open Throat Shell and
Freetour Tongue Range of
Motion: 45 Weight (g):
1520 (1/2 pair size 26.5)
Binding Compatibility:
Grip Walk, Multi Norm,
PinCert, Pin
Availability: In Stock
£530 GBP
Archived Product
-
The Maestrale was new
last season and proved an
instant hit with its
light weight, great fit
and remarkable
performance. The
anatomical shape
increases comfort and
sensitivity, whilst
improving the power
transmission. The cuff is
ventilated for drier,
more comfortable liners
and the walk mode is
truly impressive in its
range of movement. Its
Quick-StepIn licensed,
made from Pebax Renew and
uses an Intuition liner.
It needs to be tried on
to appreciate just how
good it is!
Availability: In Stock
£440.00
Available
-
Blending the comfort and
power of the proven Prime
range with the lightness
and natural movement of
the XTD and Backland
models, the all new Hawx
Prime XTD is where all
mountain skiing meets
freeride. Prolite
construction uses
different wall
thicknesses on the shell
to keep the weight down
without affecting the
performance. The tried
and tested Free/Lock hike
and ski system provides
54° of motion, ease of
use and, thanks to the
way it integrates the
energy Backbone, precise
ski control. Memory Fit
on the shell means it can
be heat moulded to even
more closely match the
foot shape; the excellent
3D Gold liner takes an
impressive mould of the
heel and ankle area for
the best comfort and
control. Comes with
GripWalk soles and tech
insoles so it can be used
with a range of
bindings.Ability
LevelOverviewFitAn
average fit on the
rearfoot with generous
forefoot width and a
medium to high
instep.Shell Prolite True
Flex PU Memory Fit shell
with PU Memory Fit cuff,
mouldable. The advanced
heat fitting technology
of Memory Fit creates a
fully personalised shell
and cuff in minutes. The
key is Memolink, a
special additive that
improves the mouldability
and stretch
characteristics of the
plastic. The boot shell
is heated in an oven,
then the skier’s
foot is placed inside the
complete boot whilst it
cools. With the
foot’s natural
standing pressure, the
forefoot of the boot can
expand up to 3mm per side
and the ankle area up to
5mm per side. True Flex
is an exclusive Atomic
shell material that means
your flex and feel
remains constant in a
variety of temperatures.
So, the boot you buy in
store feels the same on
the mountain, you
don’t lose
horsepower in the spring
and you don’t have
a boot that you
can’t flex in
mid-winter.Liner3D Gold
with Touring Flex Zone,
mouldable. Thermoformable
material is used in the
heel, ankle and midfoot
areas. The liner is
heated in an oven and is
cooled to form to the
shape of the
skier’s feet. 3D
means pre-shaped heel and
ankles areas for better
foot hold and comfort. A
special construction in
the rear of the liner
allows it to flex
backwards for a more
comfortable range of
motion when the walk mode
is being used.Key
FeaturesFree/Lock
4.0Flick from ski to walk
mode with one simple
switch. In walk mode they
offer an epic cuff
movement. In the ski
setting you can choose
13o/150/17o via the
adjustable forward
lean.Frictionless
PivotIgus polymer
bushings provide a
completely natural
movement for effortless
ascents.energy
BackboneThe energy
Backbone is a reinforced,
asymmetric backbone that
provides extra strength
for powerful skiing plus
enhanced lateral energy
transmission for better
edge grip.ProliteProlite
is a way of building skis
and boots that turns
traditional thinking on
its head. Instead of
starting with a standard
construction and cutting
material away to save
weight, Prolite does the
opposite. It starts with
the slimmest possible
profile and then it
builds up reinforcements
in key areas where
strength is
needed.SpecificationCategory:
BackcountryFlex: 120Last
Width: 100-106Custom
Shell: yesCustom Liner:
yesPower Strap: Velcro
50mmVolume:
medium-highClips: Sole
Unit: Grip Walk (ISO
9523)Pin Inserts: YesHike
Mode: yesRange Of Motion:
54Weight (g): 1852Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£400.00
Available
-
Charge down and climb
back up, the all new
Shift Pro is a versatile
boot that is as happy
running laps from lifts
as it is hiking to earn
the goods. The shape is
based on the successful
S/Pro so it has a
comfortable medium volume
fit. This can be
fine-tuned with Salomon's
excellent Custom Shell HD
mouldable shell and the
pre-shaped, seamless
Custom Fit 3D liner that
is moulded to the skier's
foot during fitting.
Coreframe construction
ensures lightness and
provides power; the
Surelock ski/walk system
is secure and simple with
a 40° range of
motion.Ability
LevelOverviewFitSnug rear
foot with generous room
around the forefoot, the
instep height is average
to high and the toe shape
is rounded.Shell Polyamid
and Polyolefin cuff, PU
clog, Custom Shell HD,
mouldable. Durable and
light with a true alpine
flex when skiing. The
Custom Shell HD process
aims to bring fast
personalisation to
the shell of your boots
in just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
The shell is reinforced
with Coreframe. A women's
specific cuff design uses
lower rear support for a
better fit and comfort in
the calf area.LinerMy
CustomFit 3D Seamless Pro
with walk function,
mouldable. This Seamless
Pro liner features a
softer part which bends
easily to follow the
natural movement of the
leg while walking. This
is a women's specific
liner with an anatomic
tongue made of highly
mouldable foams to
provide better shin and
instep comfort in
sensitive foot zones.Key
FeaturesCoreframeThe
Coreframe is an insert
that guarantees the
boot's stiffness after
the Custom Shell HD
process. It brings
lightness, enhances
sensations and increases
power.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Sensifit
InsertsThe soft PU
Sensifit insert on the
external side of the
shell makes it super easy
to get in the boot,
delivering comfy step-in
and anatomical wrapping
of the instep.360° 45mm
PowerstrapA thick 45mm
strap to hold the foot
securely and optimize
power
transmission.Riveted
Oversized PivotsThe
Riveted Oversized Pivot
ensures perfect power
transmission between cuff
and shell.3D BuckleChoose
from 3 different
positions of the instep
buckle for optimum
in-step comfort, full
customisation and
personalised foot
hold.SpecificationCategory:
BackcountryFlex: 110Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Velcro
45mmVolume:
Medium-HighClips: 4 x
Riveted Aluminium,
Microadjustable (1 x 3D),
2 Hiking HooksSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Surelock
skiwalkRange of Motion:
40Weight (g): 1548 (1/2
pair size 24.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£322.00
Available
-
The Maestrale RS is a top
selling AT model thanks
to its blend of comfort
on the ascent and total
performance on the
descent. A
Grilamid/Carbon Grilamid
LFT construction utilises
Web Frame Design to save
crucial weight without
losing power. The boot is
filled with features to
make switching from ski
to tour mode simple
without ever having to
take your gloves off:
Speed Lock Plus, Wave
Closure System and Thor
Buckles. The Intuition
liner is 100% mouldable
for the best possible
fit.
Availability: In Stock
£312.00
Available
-
Charge down and climb
back up, the Shift Pro
is a versatile boot that
is as happy running laps
from lifts as it is
hiking to earn the goods.
The shape is based on the
successful S/Pro so it
has a comfortable medium
volume fit. This can be
fine-tuned with Salomon's
excellent Custom Shell HD
mouldable shell and the
pre-shaped, seamless
Custom Fit 3D liner that
is moulded to the skier's
foot during fitting.
Coreframe construction
ensures lightness and
provides power; the
Surelock ski/walk system
is secure and simple with
a 40 degree range of
motion.Ability
LevelOverviewFitSnug rear
foot with generous room
around the forefoot, the
instep height is average
to high and the toe shape
is rounded.Shell Polyamid
and Polyolefin cuff, PU
clog, Custom Shell HD,
mouldable. Durable and
light with a true alpine
flex when skiing. The
Custom Shell HD process
aims to bring fast
personalisation to
the shell of your boots
in just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
The shell is reinforced
with a fibreglass
Coreframe.LinerMy
CustomFit 3D Seamless Pro
with walk function,
mouldable. This Seamless
Pro liner features a
softer part which bends
easily to follow the
natural movement of the
leg while walking.Key
FeaturesCoreframeThe
Coreframe is an insert
that guarantees the
boot's stiffness after
the Custom Shell HD
process. It brings
lightness, enhances
sensations and increases
power.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Sensifit
InsertsThe soft PU
Sensifit insert on the
external side of the
shell makes it super easy
to get in the boot,
delivering comfy step-in
and anatomical wrapping
of the instep.360° 45mm
PowerstrapA thick 45mm
strap to hold the foot
securely and optimize
power
transmission.Riveted
Oversized PivotsThe
Riveted Oversized Pivot
ensures perfect power
transmission between cuff
and shell.3D BuckleChoose
from 3 different
positions of the instep
buckle for optimum
in-step comfort, full
customisation and
personalised foot
hold.SpecificationCategory:
BackcountryFlex: 120Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Velcro
45mmVolume:
Medium-HighClips: 4 x
Riveted Aluminium,
Microadjustable (1 x 3D),
2 Hiking HooksSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Surelock
skiwalkRange of Motion:
40Weight (g): 1709 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£322.00
Available
-
Salomon’s S/LAB MTN
impresses both freeriders
and tourers thanks to
remarkable comfort on the
way up and no-compromise
performance on the way
down. A Pebax cuff and
Grilamid+ shell keep
weight down and deliver
precise control.
Oversized pivots,
Sensifit Shell and BC
Carbon Spine all help to
beef up the power without
adding valuable grams.
The fully mouldable liner
and shell ensure the best
possible fit; 47o of
motion boosts walking
ease and Contragrip soles
improve grip.Ability
LevelOverviewFitGrippy
heel pocket, medium
instep with average to
narrow forefoot and
angular tapered toe
box.Shell Pebax cuff,
Grilamid clog, Custom
Shell HD, mouldable.
High-quality polyamide
plastic which provides
adapted rigidity,
lightness and downhill
performance. The Custom
Shell HD process aims to
bring fast
personalisation to
the shell of your
boots in just 10 minutes.
The thinner wall
construction and new
shell materials allow the
foot to be closer to the
shell and provide
enhanced sensations,
more power and direct
transmission. Uses a
Carbon Spine touring
design for light yet
strong and stiff rear
support when
skiing.LinerMy CustomFit
3D Freetouring,
mouldable. A new material
pattern creates a more
inclusive fit, avoiding
pressure points and a new
foam construction ensures
lightness and comfort.Key
Features2 Riveted Light
and Lock System
BucklesThe buckle
situated on the cuff
offers a specific tooth
that keeps the cuff
closed while offering
great range of motion
when skinning or walking
up.Motion FlexTouring
cuff construction with a
spine made of carbon and
composite fibre. It
allows a high range of
motion when skinning
while guaranteeing a true
and progressive alpine
flex.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Dual Claw
50mm PowerstrapInspired
by racing and designed to
ensure maximum power
transmission, this strap
is made with a claw
system to allow for low
elasticity and provide
better leg hold.Contagrip
Rubber SoleGripWalk pads
are pre-mounted and their
specific shape improves
walking comfort and grip
whatever the
conditions.SpecificationCategory:
BackcountryFlex: 120Last
Width: 98-104Custom
Shell: yesCustom Liner:
yesPower Strap:
CinchVolume:
Medium-lowClips: Sole
Unit: Tour (ISO 9523)Pin
Inserts: YesHike Mode:
yesRange Of Motion:
47Weight (g): 1570Binding
Compatibility: Multi
Norm, PinCert, Pin
Availability: In Stock
£330.00
Available
-
Blending the comfort and
power of the proven Prime
range with the lightness
and natural movement of
the XTD and Backland
models, the Hawx Prime
XTD is where all mountain
skiing meets freeride.
Availability: In Stock
£530 GBP
Available
-
The Strider 120 allows
you to fully explore the
mountain whether using
lifts or hiking for extra
vert. It's 100%
customisable. Tri-Fit
Customisation uses an
infra-red ready shell
that can be easily
expanded, screw-in
components for simple
changes and a 3D Custom
Cork mouldable liner with
PrimaLoft for warmth and
durability. The
exceptional fit and
comfort is matched by the
performance: 46° range
of motion aids ascents,
the lightweight cuff and
Tri Force construction
ensure power without
excess weight and
Michelin Grip Walk soles
improve traction.
Availability: In Stock
£258.50
Available
-
Using many features of
the top-end models in the
range, the Hawx Prime
XTD 100 HT is an
excellent introduction in
to the world of BC ski
boots providing
performance, comfort and
excellent value. Prolite
construction uses
different thicknesses of
shell wall to balance
lightweight with power
and control. The
Free/Lock hike and ski
system provides 54deg of
motion, ease of use and,
thanks to the way it
integrates the energy
Backbone, precise ski
control. Memory Fit on
the shell means it can be
heat moulded to even more
closely match the foot
shape; the 3D Silver
Touring liner takes a
mould of the heel and
ankle area for the best
comfort and control.
Comes with GripWalk soles
and tech insoles at the
toes (not at the heel) so
it can be used with a
range of bindings.Ability
LevelOverviewFitAn
average fit on the
rearfoot with generous
forefoot width and a
medium to high
instep.Shell Prolite PU
Memory Fit shell with PU
Memory Fit cuff,
mouldable. The advanced
heat fitting technology
of Memory Fit creates a
fully personalised shell
and cuff in minutes. The
key is Memolink, a
special additive that
improves the mouldability
and stretch
characteristics of the
plastic. The boot shell
is heated in an oven,
then the skier's foot is
placed inside the
complete boot whilst it
cools. With the foot's
natural standing
pressure, the forefoot
of the boot can expand up
to 3mm per side and the
ankle area up to 5mm per
side.Liner3D Silver with
Touring Flex Zone,
mouldable. Thermoformable
material is used in the
heel and ankle areas. The
liner is heated in an
oven and is cooled to
form to the shape of the
skier's feet. 3D means
pre-shaped heel and
ankles areas for better
foot hold and comfort. A
special construction in
the rear of the liner
allows it to flex
backwards for a more
comfortable range of
motion when the walk mode
is being used.Key
FeaturesFree/Lock
4.0Flick from ski to walk
mode with one simple
switch. In walk mode they
offer an epic cuff
movement. In the ski
setting you can choose
13o/150/17o via the
adjustable forward
lean.Frictionless
PivotIgus polymer
bushings provide a
completely natural
movement for effortless
ascents.energy
BackboneThe energy
Backbone is a reinforced,
asymmetric backbone that
provides extra strength
for powerful skiing plus
enhanced lateral energy
transmission for better
edge grip.ProliteProlite
is a way of building skis
and boots that turns
traditional thinking on
its head. Instead of
starting with a standard
construction and cutting
material away to save
weight, Prolite does the
opposite. It starts with
the slimmest possible
profile and then it
builds up reinforcements
in key areas where
strength is
needed.SpecificationCategory:
BackcountryFlex: 100Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Velcro
35mmVolume:
Medium-HighClips: 4 x
6000-Series Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: Toe onlyHike
Mode: Yes, Free/Lock
4.0Range of Motion:
54Weight (g): 1962 (1/2
pair size 26.0)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert
Availability: In Stock
£370.00
Available
-
The R3 110 T.I. offers
freeride performance
without a super stiff
flex, or the associated
high price. It's stacked
with clever design and
features that ensure a
smooth flexing boot that
can be totally customised
and will hold the foot
securely and comfortably.
The Cabrio design creates
a very progressive flex;
the clever buckling holds
the heel in place
effectively and works
well with the cable
system to make a perfect
fit. The shell uses
pre-formed shapes in
sensitive areas and can
be custom fitted, as can
the Intuition tongue
liner. Ability Level
Overview Fit A snug rear
foot and a medium to high
volume fit in the
forefoot, cabrio
construction gives some
flexibility for height
over the instep. Shell
3-Piece Cabrio Design,
Grilamid / PU+ (Desmopan
900), mouldable. A
unique technology
utilises a 3-piece
construction
(shell/cuff/tongue) that
comfortably secures the
foot and lower leg while
optimizing smooth and
progressive flexibility.
Cabrio boots are
extremely versatile and
really shine in varied
terrain and snow
conditions. Grilamid is a
state-of-the-art
technical polymer. It is
lightweight, durable and
unaffected by cold
temperatures where other
plastic can over-stiffen.
BioFit CM can be custom
moulded during fitting.
Liner I.R. Tongue Liner,
mouldable. This liner was
specifically designed in
coordination with
Intuition to integrate
with the R3 platform
models. EVA, flex notch
gussets and 100% heat
mouldable construction
provides outstanding fit,
warmth and ultralight
weight. The I.R. Tongue
Liner is the best of the
best. Key Features Next
Gen Design Use of
advanced CAD design
technology, 3D printed
prototyping, and
cutting-edge ultralight
polymers achieves minimal
form with outstanding
strength-to-weight ratio.
GripWalk Outsoles
High-profiled
slip-resistant sole.
Increases walking comfort
and improves natural roll
thanks to curved rubber
sole. Powerstrap Buckle
Powerstrap allows for
excellent boot top
closure as well as
accommodating any leg
shape. Easy stride buckle
function extends stride
range when opened in the
walk phase. Easy Ski-Hike
Mechanism Stout hike
mechanism allows easy
release of the upper
cuff. Specification
Category: Backcountry
Flex: 110 Last Width:
99-101 Custom Shell: Yes
Custom Liner: Yes Power
Strap: Cam 50mm Volume:
Medium Clips: Powerstrap
Buckle with Easy Stride,
2 x Aluminium,
Microadjustable Sole
Unit: Grip Walk (ISO
9523) Pin Inserts: Yes
Hike Mode: Yes, with
Open Throat Shell and
Freetour Tongue Range of
Motion: 45 Weight (g):
1600 (1/2 pair size 26.5)
Binding Compatibility:
Grip Walk, Multi Norm,
PinCert, Pin
Availability: In Stock
£490 GBP
Available
-
Salomon's S/LAB MTN
impresses both freeriders
and tourers thanks to
remarkable comfort on the
way up and no-compromise
performance on the way
down. A Pebax cuff and
Grilamid+ shell keep
weight low and deliver
precise control.
Oversized pivots,
Sensifit Shell and BC
Carbon Spine all help to
beef up the power without
adding valuable grams.
The fully mouldable liner
and shell ensure the best
possible fit; 47 degrees
of motion boosts walking
ease and Contragrip soles
improve grip.Ability
LevelOverviewFitGrippy
heel pocket, medium
instep with average to
narrow forefoot and
angular tapered toe
box.Shell Pebax cuff,
Grilamid clog, Custom
Shell HD, mouldable.
High-quality polyamide
plastic which provides
adapted rigidity,
lightness and downhill
performance. The Custom
Shell HD process aims to
bring fast
personalisation to
the shell of your boots
in just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
Uses a Carbon Spine
touring design for light
yet strong and stiff rear
support when
skiing.LinerMy CustomFit
3D Freetouring,
mouldable. A new material
pattern creates a more
inclusive fit, avoiding
pressure points and a new
foam construction ensures
lightness and comfort.Key
Features2 Riveted Light
and Lock System
BucklesThe buckle
situated on the cuff
offers a specific tooth
that keeps the cuff
closed while offering
great range of motion
when skinning or walking
up.Motion FlexTouring
cuff construction with a
spine made of carbon and
composite fibre. It
allows a high range of
motion when skinning
while guaranteeing a true
and progressive alpine
flex.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Dual Claw
50mm PowerstrapInspired
by racing and designed to
ensure maximum power
transmission, this strap
is made with a claw
system to allow for low
elasticity and provide
better leg hold.Contagrip
Rubber SoleGripWalk pads
are pre-mounted and their
specific shape improves
walking comfort and grip
whatever the
conditions.SpecificationCategory:
BackcountryFlex: 120Last
Width: 98-104Custom
Shell: YesCustom Liner:
YesPower Strap: Dual Claw
50mmVolume:
Medium-LowClips: 2 x
Riveted Light,
MicroadjuastableSole
Unit: Tour (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Surelock
skiwalkRange of Motion:
47Weight (g): 1570 (1/2
pair size 26.5)Binding
Compatibility: Multi
Norm, PinCert, Pin
Availability: In Stock
£520.00
Available
-
K2's Mindbender 120 suits
all mountain and freeride
skiers looking for a
versatile boot with a
medium fit. The Powerlock
Spyne walk mechanism
creates a 50 degree range
of motion for hiking and
provides a powerful
connection when skiing.
The Powerlite shell is
light and responsive and
can be heat moulded to
create a custom fit; the
PrecisionFit Pro Tour
liner is moulded in store
too, further improving
comfort and foot hold.
The Pebax cuff ensures a
consistent flex across a
range of temperatures;
the 45mm Ripcord Power
Cinch is effective and
easy to use.Ability
LevelOverviewFitA
slightly lower than
average fit across the
forefoot width with most
other areas fitting more
towards average.Shell TPU
Powerlite Shell,
mouldable. This totally
new shell is
purpose-built to result
in the best skiing,
lightest boots produced.
Made with 4 different
stiffnesses of TPU and
optimised wall thickness
profiling, the Powerlite
Shell manages to achieve
a tricky balance between
lightweight agility and
power. The end product,
some of the lightest
boots on the market that
ski with all the power
and drive of heavier
models. Rounded out with
FastFit ease of entry and
full TPU boot fitter
customisation
capabilities.LinerPrecisionFit
Pro Tour, mouldable.
Pre-moulded and lasted
with Ultralon
heat-mouldable foam.
Featuring an asymmetric
tongue, pre-moulded
ankle pockets,
high-density power collar
and a flex notch for
increased range of motion
when hikingKey
FeaturesPowerlock
SpyneRugged, precise and
intuitive. The Powerlock
Spyne walk mechanism
allows for 50 degree
range of motion when
hiking and an
unforgiving, powerful
connection while skiing.
The mechanism can also be
adjusted to customize the
forward lean of the boot
between 10-17°.Fast Fit
entrySofter TPU designed
into the instep area of
Powerlite shell for quick
and easy entry and
exit.Friction Free
PivotLow friction cuff
pivot to ease range of
motion.GripWalk
OutsolesRemovable and
interchangeable ISO 9523
alpine rockered soles
collaboratively designed
to work with Marker's
GripWalk binding system
for better grip and added
comfort when walking and
standing in boots, but
doesn't compromise the
power transmission and
release function between
the boot and binding when
skiingSpecificationCategory:
BackcountryFlex: 120Last
Width: 98-104Custom
Shell: YesCustom Liner:
YesPower Strap: G Hook
45mmVolume:
Medium-LowClips: 4 x
Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Powerlock
SpyneRange of Motion:
50Weight (g): 1675 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£388.00
Available
-
The MTN Explore W is the
ultimate choice for
female tourers who want
lightness and function
for uphill comfort,
along with performance
for even the hardest
descents. Oversized
Pivots, Carbon Spine
Technology and Sensifit
shell give the boot power
and control while the
Surelock walk mechanism
with 63 degrees of
movement and lightweight
Grilamid construction
helps on tiring ascents.
A women's specific
Ultralight full thermo
liner is custom moulded
for the best comfort and
foot hold, as well as
toasty warm feet. Ability
Level Overview Fit Grippy
heel pocket, medium
instep with average to
narrow forefoot and
angular tapered toe box.
Shell Polyolefin cuff,
Grilamid clog, Custom
Shell HD, mouldable.
High-quality polyamide
plastic which provides
adapted rigidity,
lightness and downhill
performance. The Custom
Shell HD process aims to
bring fast
personalisation to the
shell of your boots in
just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
Uses a Carbon Spine
touring design for light
yet strong and stiff rear
support when skiing.
Liner My CustomFit 3D
Freetouring Light W,
mouldable. A new material
pattern creates a more
inclusive fit, avoiding
pressure points and a new
foam construction ensures
lightness and comfort.
Key Features 2 Riveted
Light and Lock System
Buckles The buckle
situated on the cuff
offers a specific tooth
that keeps the cuff
closed while offering
great range of motion
when skinning or walking
up. Surelock Ski Walk
Secure and simple walk
mechanism, that enables
a great range of motion
for walking, and locks
for skiing performance.
Light 35mm Powerstrap A
thick 35mm strap to hold
the foot securely and
optimize power
transmission. Contagrip
Rubber Sole GripWalk pads
are pre-mounted and their
specific shape improves
walking comfort and grip
whatever the conditions.
Specification Category:
Backcountry Flex: 90 Last
Width: 98-104 Custom
Shell: Yes Custom Liner:
Yes Power Strap: Velcro
35mm Volume: Medium-Low
Clips: 2 x Riveted Light,
Inverted Forefoot,
Microadjustable Sole
Unit: Tour (ISO 9523) Pin
Inserts: Yes Hike Mode:
Yes, Surelock skiwalk
Range of Motion: 63
Weight (g): 1270 (1/2
pair size 24.5) Binding
Compatibility: Multi
Norm, PinCert, Pin
Availability: In Stock
£450 GBP
Available
-
Fischer's new Ranger One
130 builds on the success
of the Ranger Free. It
uses the same excellent
ski and walk lever but a
wider last shape and the
effective Vacuum shell
material. The bigger
volume and firm flex will
appeal to an underserved
sector of the market,
skiers with broader feet
who want a hike mode boot
and good alpine
performance. GripWalk
soles and Dynafit inserts
make it compatible with
all tour bindings; Vacuum
ensures impressive custom
fitting during purchase.
A floating entry tongue
makes entry and exit
simple, even in the
coldest
conditions.Ability
LevelOverviewFitGenerally
a high volume fit, a
comparatively snug heel
and ankle area compared
to most high volume
fits.Shell Vacu-plast PU
shell and PU cuff,
mouldable. Traditional
2-piece design for the
best performance when
skiing. Vacuum Shell
technology means the
shell of the boot can be
precisely moulded and
fitted to the skier's
foot.Liner3D Active Fit
Zone liner, mouldable.
Pre-shaped for the best
fit out of the box,
mouldable to ensure the
best possible comfort,
foot hold and
performance. Active Fit
Zones use softer material
in sensitive areas, with
firmer materials where
support and power
transmission are needed,
these stiffer areas
include flex zones for a
dynamic fit.Key
FeaturesSki/Walk ModeWhen
the best downhills are
waiting on the other side
of a long uphill, the
Ranger's excellent
walkability is a skier's
best friend. Switch the
clever integrated lever
on the side of the cuff
to walk mode for an
excellent range of
forward motion. This
switch location makes it
easy to access and
ensures no compatibility
issues with walking
crampons.VACUUMVacuum
technology uses a unique
process and a specially
developed high-tech
plastic to adapt the
shell of the ski boot to
the anatomy of any foot.
Prior to fitting the
plastic of the boots are
heated and softened. With
the liner inserted, the
skier’s foot is placed
inside. A special cooling
pad is placed around the
outside, followed by a
compression bag linked to
the Vacuum Fit station.
The skier then stands on
the station in a
pre-determined position,
this will ensure the boot
cools down and shapes to
the skier’s natural
stance. Once in position,
air is pumped into the
compression bags,
pushing them against the
boot and improving the
mould being taken of the
foot. This procedure
achieves a sporty,
comfortable fit that is
unrivalled in this
segment. The heel and
ankle area can be
expanded or compressed to
create best possible
shape; the forefoot can
be made roomier.
Vacu-PlastThis unique
material was developed
exclusively for use with
Fischer ski boots. Apart
from its extraordinary
moulding properties
Vacu-Plast also has other
special features: it is
very temperature stable,
meaning it isn’t
adversely affected on
extreme cold days when
certain plastics become
very stiff; it is lighter
than other materials used
on performance ski boots,
and it has better
vibration
dampening.SpecificationCategory:
BackcountryFlex: 130Last
Width: 101 (+/-3)Custom
Shell: YesCustom Liner:
YesPower Strap: Velcro
45mmVolume: highClips: 4
x Ranger One Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Hike Ride Lock
ModeRange of Motion:
55Weight (g): 1850 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£555.00
Archived Product
-
Fit: medium to
narrow rearfoot, medium
to narrow auto-adjust
forefoot, great heel
Availability: In Stock
£350.00
Available
-
Charge down and climb
back up, the Shift Pro
is a versatile boot that
is as happy running laps
from lifts as it is
hiking to earn the goods.
The shape is based on the
successful S/Pro so it
has a comfortable medium
volume fit. This can be
fine-tuned with Salomon's
excellent Custom Shell HD
mouldable shell and the
pre-shaped, seamless
Custom Fit 3D liner that
is moulded to the skier's
foot during fitting.
Coreframe construction
ensures lightness and
provides power; the
Surelock ski/walk system
is secure and simple with
a 40 degree range of
motion.Ability
LevelOverviewFitSnug rear
foot with generous room
around the forefoot, the
instep height is average
to high and the toe shape
is rounded.Shell Polyamid
and Polyolefin cuff, PU
clog, Custom Shell HD,
mouldable. Durable and
light with a true alpine
flex when skiing. The
Custom Shell HD process
aims to bring fast
personalisation to
the shell of your boots
in just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
The shell is reinforced
with a fibreglass
Coreframe.LinerMy
CustomFit 3D Seamless Pro
with walk function,
mouldable. This Seamless
Pro liner features a
softer part which bends
easily to follow the
natural movement of the
leg while walking.Key
FeaturesCoreframeThe
Coreframe is an insert
that guarantees the
boot's stiffness after
the Custom Shell HD
process. It brings
lightness, enhances
sensations and increases
power.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Sensifit
InsertsThe soft PU
Sensifit insert on the
external side of the
shell makes it super easy
to get in the boot,
delivering comfy step-in
and anatomical wrapping
of the instep.360° 45mm
PowerstrapA thick 45mm
strap to hold the foot
securely and optimize
power
transmission.Riveted
Oversized PivotsThe
Riveted Oversized Pivot
ensures perfect power
transmission between cuff
and shell.3D BuckleChoose
from 3 different
positions of the instep
buckle for optimum
in-step comfort, full
customisation and
personalised foot
hold.SpecificationCategory:
BackcountryFlex: 120Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Velcro
45mmVolume:
Medium-HighClips: 4 x
Riveted Aluminium,
Microadjustable (1 x 3D),
2 Hiking HooksSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Surelock
skiwalkRange of Motion:
40Weight (g): 1709 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£322.00
Archived Product
-
Fit: medium to
narrow rearfoot, medium
to narrow auto-adjust
forefoot, great heel
Availability: In Stock
£400.00
Available
-
The Shift Pro 130 is for
skiers who mix up riding
lifts with hiking for
better terrain. Coreframe
ensures the boot has the
power and control for
skiing bigger lines;
Surelock is simple and
effective, providing 40
degrees of motion for
walking and the necessary
strength to compete with
alpine models. The Custom
Shell HD and the
pre-formed, seamless 3D
Custom Fit Race liner are
both heat moulded to for
a personalised shape,
ensuring the best comfort
and foot hold. A Grilamid
cuff keeps the weight
down and the flex
consistent.Ability
LevelOverviewFitSnug rear
foot with generous room
around the forefoot, the
instep height is average
to high and the toe shape
is rounded.Shell Polyamid
and Polyolefin Custom
Shell HD, mouldable.
Durable, light and
temperature stable with a
true alpine flex when
skiing. The Custom Shell
HD process aims to bring
fast personalisation to
the shell of your boots
in just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
The shell is reinforced
with an Xecarb
Coreframe.LinerMy
CustomFit 3D Seamless
Race with walk function,
mouldable. This Seamless
Race liner features a
softer part which bends
easily to follow the
movement of the cuff in
hiking mode and ensures a
natural movement of the
leg when touring.Key
FeaturesCoreframeThe
Coreframe is an insert
that guarantees the
boot's stiffness after
the Custom Shell HD
process. It brings
lightness, enhances
sensations and increases
power.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Sensifit
InsertsThe soft PU
Sensifit insert on the
external side of the
shell makes it super easy
to get in the boot,
delivering comfy step-in
and anatomical wrapping
of the instep.Sense Claw
45mmTwo positions for
adapted fit and
sensations options. The
unhooked position allows
you to reach the right
level of progressiveness
and rebound, while the
hooked position ensures
maximum stiffness and
performance.Riveted
Oversized PivotsThe
Riveted Oversized Pivot
ensures perfect power
transmission between cuff
and shell.3D BuckleChoose
from 3 different
positions of the instep
buckle for optimum
in-step comfort, full
customisation and
personalised foot
hold.SpecificationCategory:
BackcountryFlex: 130Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Cinch
45mmVolume:
Medium-HighClips: 4 x
Riveted Aluminium,
Microadjustable (1 x 3D),
2 Hiking HooksSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Surelock
skiwalkRange of Motion:
40Weight (g): 1631 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£540.00
Available
-
The Strider 130 allows
you to fully explore the
mountain whether using
lifts or hiking for extra
vert. Tri-Fit
Customisation uses an
infra-red ready shell
that can be easily
expanded, screw-in
components for simple
changes and a 3D Custom
Cork mouldable liner with
PrimaLoft for warmth and
durability. The
exceptional fit and
comfort is matched by the
performance: 46° range
of motion aids ascents,
the lightweight cuff and
Tri Force construction
ensure power without
excess weight and
Michelin Grip Walk soles
improve traction.Ability
LevelOverviewFitA snug
fit on the rear foot with
generous forefoot width
and a medium to high
instep.Shell Carbon Triax
cuff, Infrared PU clog,
mouldable. Lightweight
athletic equipment is
fundamentally important,
so Nordica have developed
a shell specific to the
challenges associated
with a product this
light. The Tri-Force
Frame is a remarkable
concept, using an
anatomical shell design
that channels energy
through the body of the
boot to the edges of your
skis. A combination of
harder plastics at the
spine and chassis, and
softer plastics around
the foot and instep,
allows nimble and precise
movements while
maintaining the highest
level of comfort.
Infrared technology uses
an infrared lamp and a
vacuum system for precise
and safe customisation
where extra work is
needed on a shell.Liner3D
Cork Fit Primaloft Light,
mouldable. engineered
with the combination of a
natural cork compound and
an anatomical pre-shaped
3D laminate, Custom Cork
liners create the perfect
balance between comfort
and performance while
being completely
customisable.Key
FeaturesWeather ShieldThe
Weather Shield is an
overlap system integrated
into the shell that
provides a full
waterproof feature to
prevent water from
leaking into the boot.
And as we all know, dry
feet are warm and
comfortable feet!Feather
Lock Hike/Ski
MechanismThe Feather Lock
system creates a 46o
range of motion yet when
locked-out in ski mode,
its spine delivers
unprecedented power and
precision for the ride
down.Michelin GripWalk
SolesGripWalk soles offer
rocker and grip for
comfortable hiking;
Michelin compounds
increase the durability
and
traction.SpecificationCategory:
BackcountryFlex: 130Last
Width: 100Custom Shell:
noCustom Liner: yesPower
Strap: Velcro 45mmVolume:
mediumClips: Sole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
yesRange Of Motion:
46Weight (g): 1910Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£312.00
Available
-
Roxa's R3W 105 T.I. is a
super interesting option
as it mixes alpine
performance with freeride
capability and a smooth
flex dialled in for mixed
terrain. Plus it's
amazing value. The
3-piece Cabrio design
creates this special flex
and also ensures easy
entry and exit. Tuning
the fit is simple as the
shell comes with
pre-formed shaping in
hard to fit areas and can
custom moulded. To
improve on that further
the liner is the
excellent Intuition
Freeride tongue that
keeps weight down,
warmth up and takes an
impressive form of the
foot when moulded.Ability
LevelOverviewFitA snug
rear foot and a medium to
high volume fit in the
forefoot, cabrio
construction gives some
flexibility for height
over the instep. Shell
3-Piece Cabrio Design,
Grilamid / PU+ (Desmopan
900), mouldable. A
unique technology
utilises a 3-piece
construction
(shell/cuff/tongue) that
comfortably secures the
foot and lower leg while
optimizing smooth and
progressive flexibility.
Cabrio boots are
extremely versatile and
really shine in varied
terrain and snow
conditions. Grilamid is a
state-of-the-art
technical polymer. It is
lightweight, durable and
unaffected by cold
temperatures where other
plastic can over-stiffen.
BioFit CM can be custom
moulded during
fitting.LinerI.R. Tongue
Liner, mouldable. This
liner was specifically
designed in coordination
with Intuition to
integrate with the R3
platform models. eVA,
flex notch gussets and
100% heat mouldable
construction provides
outstanding fit, warmth
and ultralight weight.
The I.R. Tongue Liner is
the best of the best.Key
FeaturesNext Gen
DesignUse of advanced CAD
design technology, 3D
printed prototyping, and
cutting-edge ultralight
polymers achieves minimal
form with outstanding
strength-to-weight
ratio.Women's Specific
CuffWomen's specific
upper cuff provides
reduced height and a
‘scalloped' shape to
comfortably accommodate
women's calf
shapes.GripWalk
OutsolesHigh-profiled
slip-resistant sole.
Increases walking comfort
and improves natural roll
thanks to curved rubber
sole.Powerstrap
BucklePowerstrap allows
for excellent boot top
closure as well as
accommodating any leg
shape. easy stride buckle
function extends stride
range when opened in the
walk phase.easy Ski-Hike
MechanismStout hike
mechanism allows easy
release of the upper
cuff.SpecificationCategory:
BackcountryFlex: 105Last
Width: 99-101Custom
Shell: YesCustom Liner:
YesPower Strap: Cam
50mmVolume: MediumClips:
Powerstrap Buckle with
easy Stride, 2 x
Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, with Open Throat
Shell and Freetour
TongueRange of Motion:
45Weight (g): 1430 (1/2
pair size 24.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£329.00
Available
-
Using many features of
the top-end models in the
range, the Hawx Prime
XTD 100 HT is an
excellent introduction in
to the world of BC ski
boots providing
performance, comfort and
excellent value. Prolite
construction uses
different thicknesses of
shell wall to balance
lightweight with power
and control. The
Free/Lock hike and ski
system provides 54deg of
motion, ease of use and,
thanks to the way it
integrates the Energy
Backbone, precise ski
control. Memory Fit on
the shell means it can be
heat moulded to even more
closely match the foot
shape; the 3D Silver
Touring liner takes a
mould of the heel and
ankle area for the best
comfort and control.
Comes with GripWalk soles
and tech insoles at the
toes (not at the heel) so
it can be used with a
range of bindings.
Ability Level Overview
Fit An average fit on the
rearfoot with generous
forefoot width and a
medium to high instep.
Shell Prolite PU Memory
Fit shell with PU Memory
Fit cuff, mouldable. The
advanced heat fitting
technology o...
Availability: In Stock
£370 GBP
Available
-
The new version of the
Cochise is both stronger
and lighter, an
impressive upgrade on
what was already a class
leading offering for
skiers who demand the
best downhill performance
plus comfort and ease for
ascending. The most
noticeable change is the
T-Ride hike system that
increases the range of
motion as well as
improving the strength
and power transfer.
C.A.S. is still present
on the shell and liner,
as well as the tongue
now, meaning
customisation is simple
and very effective to
achieve a truly
personalised fit.Ability
LevelOverviewFitGood heel
hold, medium mid-foot
and comfy toe box.Shell
PU shell with PP cuff and
Carbon Co-injected Back
Spine, mouldable. PU on
the shell provides the
strength and the
Asymmetric Power
Transmission uses thicker
plastic on the
medial/inside part of the
boot ensuring more
lateral power transfer
and increased edge grip.
The PP on the cuff helps
to keep the weight
down.LinerPerformance
C.A.S, mouldable, with
Floating Tongue,
Celliant and fibreglass
collar. The Cochise
C.A.S. liners are light,
anatomically shaped for
optimal comfort and great
heel hold. The dual
density micro-cells
material is durable and
easy to customize. For
unmatched personal
customisation, the
C.A.S. liner can be
thermo-moulded, punched
and grinded. The new
folding structure on the
back ensures easy hiking.
Celliant transforms your
body's heat into
full-spectrum infrared
energy, promoting local
circulation and cell
oxygenation while keeping
you drier and at the
perfect temperature.Key
FeaturesT-RideThe T-Ride
system is fully
integrated into the boot
design. It's a solid
cuff-to-shell connection
which delivers the
perfect combination
between downhill
performance and uphill
hiking ability. The
design makes it easy and
intuitive, you will
always be sure whether is
on ski or hiking mode.
The integrated lock
system screw ensures that
the mechanism stays
closed even during hard
cliff landings or impact
with rocks. 50 degrees
range of motion allows a
comfortable hike up to
the summit when in walk
mode; the T-Ride longer
lever arm guarantees a
quicker edge to edge
transition, increased
lateral power and
stability.C.A.S. (Custom
Adaptive Shell)The C.A.S.
Fit System gives the
ability to customise the
ski boot for a truly
personal fit. The
anatomical shape of the
liner and shell are the
key to a great
out-of-the-box fit. The
closer the liner and
shell match he natural
shape of the foot, the
better the fit and
performance will be. The
C.A.S. shell has dimples
on the shell that reduce
surface tension and
facilitate the thermo
customisation process.
The dual density
micro-cells material of
the C.A.S. liner is
durable and easy to
customize, and for
unmatched personal
customisation the. liner
can be thermo-moulded,
punched and grinded. The
C.A.S. Tongue is a great
addition to the C.A.S.
customisation system, it
can be thermoformed in a
few minutes to perfectly
match the shape of your
shin, reducing shin pain
and increasing
performance.Quick
InstepThe instep material
is softer, making
stepping in and out easy
and avoiding unnecessary
pain, especially at low
temperatures.Asymmetric
Power TransmissionThe
inside of the boot is
made with thicker plastic
to increase support where
needed. This provides
more lateral power
transmission and
increased edge grip.Free
MoveThe new hinge point
allows frictionless
hiking, so you can hike
more with less
energy.Arch GripToe and
heel Vibram® rubbered
soles are connected by
the rubber Arch Grip that
delivers more versatility
in the daily usage. It
supplies more grip on
mountain terrain, on
metal ladders, on
snowmobiles, and so
on.SpecificationCategory:
BackcountryFlex: 120Last
Width: 99Custom Shell:
NoCustom Liner: YesPower
Strap: Velcro 45mmVolume:
MediumClips: 4 x Light
Buckles,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, T Ride Hike
SystemRange of Motion:
50Weight (g): 1750 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£550.00
Archived Product
-
Fit: medium
volume, good heel hold
and roomy toe box,
custom moulded foot shape
Salomon’s
Availability: In Stock
£360.00
Available
-
Blending the comfort and
power of the proven Prime
range with the lightness
and natural movement of
the XTD and Backland
models, the all new Hawx
Prime XTD is where all
mountain skiing meets
freeride and backcountry.
Memory Fit on the shell
means it can be heat
moulded to even more
closely match the foot
shape; the excellent
Mimic Platinum liner uses
a unique process to take
an impressive mould of
the heel and ankle area
for the best comfort and
control. Comes with
GripWalk soles and tech
insoles so it can be used
with a range of bindings.
Ability Level Overview
Fit An average fit on the
rearfoot with generous
forefoot width and a
medium to high instep.
Shell Prolite Memory Fit
Polyamide (PA) shell and
PU cuff, mouldable. The
advanced heat fitting
technology of Memory Fit
creates a fully
personalised shell and
cuff in minutes. The key
is Memolink, a special
additive that improves
the mouldability and
stretch characteristics
of the plastic. The boot
shell is heated in an
oven, then the skier's
foot is placed inside the
complete boot whilst it
cools. With the foot's
natural standing
pressure, the forefoot
of the boot can expand up
to 3mm per side and the
ankle area up to 5mm per
side. Liner Mimic
Platinum with Touring
Flex Zone, mouldable.
Atomic's unique Mimic
liners use a layer of
supportive thermoformable
material in the heel,
ankle and tongue areas.
After being softened in
an oven, this material
mimics the precise shape
of your foot, and
hardens in that shape for
a perfect custom fit. In
addition there is heat
mouldable foam in the
tongue, forefoot and
ankle area that can be
formed to the foot at the
same time as the Mimic
material. Key Features
Free/Lock 4.0 Flick from
ski to walk mode with one
simple switch. In walk
mode they offer an epic
cuff movement. In the ski
setting you can choose
13o/150/17o via the
adjustable forward lean.
Frictionless Pivot Igus
polymer bushings provide
a completely natural
movement for effortless
ascents. Energy Backbone
The Energy Backbone is a
reinforced, asymmetric
backbone that provides
extra strength for
powerful skiing plus
enhanced lateral energy
transmission for better
edge grip. Prolite
Prolite is a way of
building skis and boots
that turns traditional
thinking on its head.
Instead of starting with
a standard construction
and cutting material away
to save weight, Prolite
does the opposite. It
starts with the slimmest
possible profile and then
it builds up
reinforcements in key
areas where strength is
needed. Specification
Category: Backcountry
Flex: 115 Last Width:
100-106 Custom Shell: Yes
Custom Liner: Yes Power
Strap: Quick Release Cam
50mm Volume: Medium-High
Clips: 4 x 6000-Series
Aluminium,
Microadjustable Sole
Unit: Grip Walk (ISO
9523) Pin Inserts: Yes
Hike Mode: Yes,
Free/Lock 4.0 Range of
Motion: 54 Weight (g):
1575 (1/2 pair size 24.0)
Binding Compatibility:
Grip Walk, Multi Norm,
PinCert, Pin
Availability: In Stock
£530 GBP
Available
-
The Hawx Ultra XTD brings
together the feel and
control of the Hawx Ultra
and the natural movement
of the Backland range to
harmonise freeride
ability with awesome
uphill capability. The
Free/Lock 2.0 system is
simple and effective and,
combined with the
frictionless pivot,
provides a fluid 54
degrees of movement.
Prolite construction with
Grilamid minimises
weight. The Memory Fit
shell can be heat moulded
and the new and very
impressive Mimic liner is
customisable too. The
result is comfortable
all-day touring in a boot
that packs a punch when
it comes to
performance.Ability
LevelOverviewFitA medium
to low volume fit around
the rear foot and
forefoot, average instep
height and a round toe
box.Shell Prolite Memory
Fit Polyamide (PA) shell
and cuff, customisable.
The advanced heat fitting
technology of Memory Fit
creates a fully
personalised shell and
cuff in minutes. The key
is Memolink, a special
additive that improves
the mouldability and
stretch characteristics
of the plastic. The boot
shell is heated in an
oven, then the skier's
foot is placed inside the
complete boot whilst it
cools. With the foot's
natural standing
pressure, the forefoot
of the boot can expand up
to 3mm per side and the
ankle area up to 5mm per
side.LinerMimic Platinum
with Touring Flex Zone,
mouldable. Atomic's
unique Mimic liners use a
layer of supportive
thermoformable material
in the heel, ankle and
tongue areas. After being
softened in an oven,
this material mimics the
precise shape of your
foot, and hardens in
that shape for a perfect
custom fit. In addition
there is heat mouldable
foam in the tongue,
forefoot and ankle area
that can be formed to the
foot at the same time as
the Mimic material.Key
FeaturesFree/Lock
2.0Flick from ski to walk
mode with one simple
switch. In walk mode they
offer an epic cuff
movement. In the ski
setting you can choose
13o/150/17o via the
adjustable forward
lean.Frictionless
PivotIgus polymer
bushings provide a
completely natural
movement for effortless
ascents.energy
BackboneThe energy
Backbone is a reinforced,
asymmetric backbone that
provides extra strength
for powerful skiing plus
enhanced lateral energy
transmission for better
edge grip.ProliteProlite
is a way of building skis
and boots that turns
traditional thinking on
its head. Instead of
starting with a standard
construction and cutting
material away to save
weight, Prolite does the
opposite. It starts with
the slimmest possible
profile and then it
builds up reinforcements
in key areas where
strength is
needed.SpecificationCategory:
BackcountryFlex: 130Last
Width: 98-102Custom
Shell: YesCustom Liner:
YesPower Strap: Quick
Release Cam 50mmVolume:
Medium-LowClips: 4 x
6000-Series Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Free/Lock 4.0Range
of Motion: 54Weight (g):
1580 (1/2 pair size
26.0)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£600.00
Available
-
Blending the comfort and
power of the proven Prime
range with the lightness
and natural movement of
the XTD and Backland
models, the all new Hawx
Prime XTD is where all
mountain skiing meets
freeride and backcountry.
Memory Fit on the shell
means it can be heat
moulded to even more
closely match the foot
shape; the excellent
Mimic Platinum liner uses
a unique process to take
an impressive mould of
the heel and ankle area
for the best comfort and
control. Comes with
GripWalk soles and tech
insoles so it can be used
with a range of bindings.
Ability Level Overview
Fit An average fit on the
rearfoot with generous
forefoot width and a
medium to high instep.
Shell Prolite Memory Fit
Polyamide (PA) shell and
PU cuff, mouldable. The
advanced heat fitting
technology of Memory Fit
creates a fully
personalised shell and
cuff in minutes. The key
is Memolink, a special
additive that improves
the mouldability and
stretch characteristics
of the plastic. The boot
shell is heated in an
oven, then the skier's
foot is placed inside the
complete boot whilst it
cools. With the foot's
natural standing
pressure, the forefoot
of the boot can expand up
to 3mm per side and the
ankle area up to 5mm per
side. Liner Mimic
Platinum with Touring
Flex Zone, mouldable.
Atomic's unique Mimic
liners use a layer of
supportive thermoformable
material in the heel,
ankle and tongue areas.
After being softened in
an oven, this material
mimics the precise shape
of your foot, and
hardens in that shape for
a perfect custom fit. In
addition there is heat
mouldable foam in the
tongue, forefoot and
ankle area that can be
formed to the foot at the
same time as the Mimic
material. Key Features
Free/Lock 4.0 Flick from
ski to walk mode with one
simple switch. In walk
mode they offer an epic
cuff movement. In the ski
setting you can choose
13o/150/17o via the
adjustable forward lean.
Frictionless Pivot Igus
polymer bushings provide
a completely natural
movement for effortless
ascents. Energy Backbone
The Energy Backbone is a
reinforced, asymmetric
backbone that provides
extra strength for
powerful skiing plus
enhanced lateral energy
transmission for better
edge grip. Prolite
Prolite is a way of
building skis and boots
that turns traditional
thinking on its head.
Instead of starting with
a standard construction
and cutting material away
to save weight, Prolite
does the opposite. It
starts with the slimmest
possible profile and then
it builds up
reinforcements in key
areas where strength is
needed. Specification
Category: Backcountry
Flex: 115 Last Width:
100-106 Custom Shell: Yes
Custom Liner: Yes Power
Strap: Quick Release Cam
50mm Volume: Medium-High
Clips: 4 x 6000-Series
Aluminium,
Microadjustable Sole
Unit: Grip Walk (ISO
9523) Pin Inserts: Yes
Hike Mode: Yes,
Free/Lock 4.0 Range of
Motion: 54 Weight (g):
1575 (1/2 pair size 24.0)
Binding Compatibility:
Grip Walk, Multi Norm,
PinCert, Pin
Availability: In Stock
£530 GBP
Available
-
The new version of the
Cochise is both stronger
and lighter, an
impressive upgrade on
what was already a class
leading offering for
skiers who demand the
best downhill performance
plus comfort and ease for
ascending. The most
noticeable change is the
T-Ride hike system that
increases the range of
motion as well as
improving the strength
and power transfer.
C.A.S. is still present
on the shell and liner,
as well as the tongue
now, meaning
customisation is simple
and very effective to
achieve a truly
personalised fit.Ability
LevelOverviewFitGood heel
hold, medium mid-foot
and comfy toe box.Shell
PU shell with PP cuff and
Carbon Co-injected Back
Spine, mouldable. PU on
the shell provides the
strength and the
Asymmetric Power
Transmission uses thicker
plastic on the
medial/inside part of the
boot ensuring more
lateral power transfer
and increased edge grip.
The PP on the cuff helps
to keep the weight
down.LinerPerformance
C.A.S, mouldable, with
Floating Tongue,
Celliant and fibreglass
collar. The Cochise
C.A.S. liners are light,
anatomically shaped for
optimal comfort and great
heel hold. The dual
density micro-cells
material is durable and
easy to customize. For
unmatched personal
customisation, the
C.A.S. liner can be
thermo-moulded, punched
and grinded. The new
folding structure on the
back ensures easy hiking.
Celliant transforms your
body's heat into
full-spectrum infrared
energy, promoting local
circulation and cell
oxygenation while keeping
you drier and at the
perfect temperature.Key
FeaturesT-RideThe T-Ride
system is fully
integrated into the boot
design. It's a solid
cuff-to-shell connection
which delivers the
perfect combination
between downhill
performance and uphill
hiking ability. The
design makes it easy and
intuitive, you will
always be sure whether is
on ski or hiking mode.
The integrated lock
system screw ensures that
the mechanism stays
closed even during hard
cliff landings or impact
with rocks. 50 degrees
range of motion allows a
comfortable hike up to
the summit when in walk
mode; the T-Ride longer
lever arm guarantees a
quicker edge to edge
transition, increased
lateral power and
stability.C.A.S. (Custom
Adaptive Shell)The C.A.S.
Fit System gives the
ability to customise the
ski boot for a truly
personal fit. The
anatomical shape of the
liner and shell are the
key to a great
out-of-the-box fit. The
closer the liner and
shell match he natural
shape of the foot, the
better the fit and
performance will be. The
C.A.S. shell has dimples
on the shell that reduce
surface tension and
facilitate the thermo
customisation process.
The dual density
micro-cells material of
the C.A.S. liner is
durable and easy to
customize, and for
unmatched personal
customisation the. liner
can be thermo-moulded,
punched and grinded. The
C.A.S. Tongue is a great
addition to the C.A.S.
customisation system, it
can be thermoformed in a
few minutes to perfectly
match the shape of your
shin, reducing shin pain
and increasing
performance.Quick
InstepThe instep material
is softer, making
stepping in and out easy
and avoiding unnecessary
pain, especially at low
temperatures.Asymmetric
Power TransmissionThe
inside of the boot is
made with thicker plastic
to increase support where
needed. This provides
more lateral power
transmission and
increased edge grip.Free
MoveThe new hinge point
allows frictionless
hiking, so you can hike
more with less
energy.Arch GripToe and
heel Vibram® rubbered
soles are connected by
the rubber Arch Grip that
delivers more versatility
in the daily usage. It
supplies more grip on
mountain terrain, on
metal ladders, on
snowmobiles, and so
on.SpecificationCategory:
BackcountryFlex: 120Last
Width: 99Custom Shell:
NoCustom Liner: YesPower
Strap: Velcro 45mmVolume:
MediumClips: 4 x Light
Buckles,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, T Ride Hike
SystemRange of Motion:
50Weight (g): 1750 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£550.00
Available
-
Sammy Carlson's Full Tilt
Ascendant SC is the
tech-compatible boot that
won't sacrifice
performance on the
downhill. A comfortable
Tour Pro Wrap Liner,
removable 120 Flex Tongue
and lightweight evolution
3-Piece Shell work
together to make the
Ascendant SC progressive
and innovative within the
resort ropes and
beyond.Ability
LevelOverviewFitA
slighlty more relaxed
feel compared to most
tour/backcountry boots.
Medium volume around the
rear foot and generous in
the forefoot with some
adaptability over the
instep because of the
cabrio design.Shell
LinerSpecificationCategory:
BackcountryFlex: 120Last
Width: 102Custom Shell:
noCustom Liner: yesPower
Strap: CinchVolume:
medium-highClips: Sole
Unit: Grip Walk (ISO
9523)Pin Inserts: YesHike
Mode: yesRange Of Motion:
40/60Weight (g):
1930Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£425.00
Available
-
Sammy Carlson's Full Tilt
Ascendant SC is the
tech-compatible boot that
won't sacrifice
performance on the
downhill. A comfortable
Tour Pro Wrap Liner,
removable 120 Flex Tongue
and lightweight evolution
3-Piece Shell work
together to make the
Ascendant SC progressive
and innovative within the
resort ropes and
beyond.Ability
LevelOverviewFitA
slighlty more relaxed
feel compared to most
tour/backcountry boots.
Medium volume around the
rear foot and generous in
the forefoot with some
adaptability over the
instep because of the
cabrio design.Shell
evolution (FTe),
mouldable. The evolution
Pro Tour offers a smooth
stride and articulated
purchase in any
situation. Walk farther
and more comfortably than
ever before. Featuring a
higher back cuff and
lightweight Grilamid
plastic, this
construction will take
you anywhere. Full Tilt
3-piece construction
offers a smooth flex with
no deformation of the
shell, leading to better
foot hold, increased
control and improved
shock
absorption.LinerTour Pro
Wrap, mouldable. With a
Tour Flex Notch,
removable external
J-Bars, lacing system,
and power strap, the
Tour Pro makes walking a
blister-free experience
in an enveloping, snug
fit. The foam is listed
here from foot to shell:
2mm Intuition MD, medium
density and hardness for
a solid balance of
comfort and performance;
4mm Open Cell, ensures
warmth and comfort
straight out of the box;
7mm Intuition HD Foam,
high density and firm for
a responsive and
efficient transfer of
energy. This Intuition
closed cell foam is body
heat activated to mould
100% to your feet and
shells during use, or
can be instantly heat
moulded by a shop in
minutes for a light,
warm and super
comfortable fit. J-Bars
are additional j-shaped
piece of foam that is
inserted internally on
both sides of the ankle
area to dramatically
increase ankle hold down,
to keep your feet
perfectly in place for
precise control.Key
FeaturesWide ToeA thinner
foam is used in the front
of the liner to increase
space without sacrificing
control for people with
wider feet or who prefer
a little more toe
room.GripWalk
OutsoleDesigned for a
better purchase on
unstable and slippery
terrain. The convex shape
and ribbed tread add both
comfort and grip for
getting from house to
hill to peak.Tour Hook
and Flipped Bottom
BuckleKeep your buckles
in place without
impinging upon the full
cuff rotation. The bottom
buckle is flipped to sit
on top of the boot. This
keeps the buckle out of
the way when you are
leaning heavily into a
turn, walking in deeper
snow, going through
narrow gaps, broken
sliding on a rail, and
more! Ribbed Tongue100%
Ribbed tongue enables
smoother, more natural
linear flex from your
shin to your toe. The
tongue bends like a
flexible straw, never
bottoming out while
providing smooth rebound.
No more shin bang!Walk
ModeFlip the lever up to
ascend with ease. And
when it's time to send
it, flip the lever down,
lock the cuff in place,
and push into the fluid,
progressive flex you've
come to expect from Full
Tilt. Works great for
aprés bar sessions
too.Shock Absorber Boot
BoardA soft rubber layer
in the sole of the shell
absorbs vibrations,
impact and shock for a
smooth
ride.SpecificationCategory:
BackcountryFlex: 120Last
Width: 102Custom Shell:
YesCustom Liner: YesPower
Strap: Cinch Volume:
Medium-HighClips: 3x
Ladder Aluminium,
Microadjustable, 2 with
Tour Hook and 1 Inverted
ForefootSole Unit: Grip
Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, FTe TourRange of
Motion: 60Weight (g):
1970 (1/2 pair size
27.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£485.00
Available
-
The Ranger Free 120 Walk
is an impressively light
freeride boot that hikes
as well as it skis. A
Grilamid shell and cuff
keep the weight low
without compromising on
the performance. Vibram
GripWalk soles improve
traction; the 3D
pre-shaped Active Fit
Zone liner can be heat
moulded to improve
comfort and foot hold.
Total weight is under
1600g a boot (size 26.5)
and the neatly integrated
ski/walk mechanism adds
55 degrees of motion.
Given the stats it's easy
to understand how this
boot is so good on
descents and
ascents.Ability
LevelOverviewFitA medium
to low volume fit all
over with a slightly more
downhill performance
feel.Shell
Carbon-reinforced
Grilamid shell and cuff.
Traditional 2-piece
design for the best
performance when skiing.
Grilamid for the perfect
balance of lightweight,
power and consistent
characteristics whatever
the temperature.Liner3D
Active Fit Zone liner,
mouldable. Pre-shaped for
the best fit out of the
box, mouldable to ensure
the best possible
comfort, foot hold and
performance. Active Fit
Zones use softer material
in sensitive areas, with
firmer materials where
support and power
transmission are needed,
these stiffer areas
include flex zones for a
dynamic fit. Loops are
included on the liner in
case laces are wanted for
the best foot hold.Key
FeaturesSki/Walk ModeWhen
the best downhills are
waiting on the other side
of a long uphill, the
Ranger's excellent
walkability is a skier's
best friend. Switch the
clever integrated lever
on the side of the cuff
to walk mode for an
excellent range of
forward motion. This
switch location makes it
easy to access and
ensures no compatibility
issues with walking
crampons.SpecificationCategory:
BackcountryFlex: 120Last
Width: 99Custom Shell:
NoCustom Liner: YesPower
Strap: Cinch 52mmVolume:
MediumClips: 4 x Ranger
Free Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Hike Ride Lock
ModeRange of Motion:
55Weight (g): 1650 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£480.00
Available
-
Blending the comfort and
power of the proven Prime
range with the lightness
and natural movement of
the XTD and Backland
models, the all new Hawx
Prime XTD is where all
mountain skiing meets
freeride. Prolite
construction uses
different wall
thicknesses on the shell
to keep the weight down
without affecting the
performance. The tried
and tested Free/Lock hike
and ski system provides
54° of motion, ease of
use and, thanks to the
way it integrates the
energy Backbone, precise
ski control. Memory Fit
on the shell means it can
be heat moulded to even
more closely match the
foot shape; the excellent
3D Gold liner takes an
impressive mould of the
heel and ankle area for
the best comfort and
control. Comes with
GripWalk soles and tech
insoles so it can be used
with a range of
bindings.Ability
LevelOverviewFitAn
average fit on the
rearfoot with generous
forefoot width and a
medium to high
instep.Shell Prolite True
Flex PU Memory Fit shell
with PU Memory Fit cuff,
mouldable. The advanced
heat fitting technology
of Memory Fit creates a
fully personalised shell
and cuff in minutes. The
key is Memolink, a
special additive that
improves the mouldability
and stretch
characteristics of the
plastic. The boot shell
is heated in an oven,
then the skier’s
foot is placed inside the
complete boot whilst it
cools. With the
foot’s natural
standing pressure, the
forefoot of the boot can
expand up to 3mm per side
and the ankle area up to
5mm per side. True Flex
is an exclusive Atomic
shell material that means
your flex and feel
remains constant in a
variety of temperatures.
So, the boot you buy in
store feels the same on
the mountain, you
don’t lose
horsepower in the spring
and you don’t have
a boot that you
can’t flex in
mid-winter.Liner3D Gold
with Touring Flex Zone,
mouldable. Thermoformable
material is used in the
heel, ankle and midfoot
areas. The liner is
heated in an oven and is
cooled to form to the
shape of the
skier’s feet. 3D
means pre-shaped heel and
ankles areas for better
foot hold and comfort. A
special construction in
the rear of the liner
allows it to flex
backwards for a more
comfortable range of
motion when the walk mode
is being used.Key
FeaturesFree/Lock
4.0Flick from ski to walk
mode with one simple
switch. In walk mode they
offer an epic cuff
movement. In the ski
setting you can choose
13o/150/17o via the
adjustable forward
lean.Frictionless
PivotIgus polymer
bushings provide a
completely natural
movement for effortless
ascents.energy
BackboneThe energy
Backbone is a reinforced,
asymmetric backbone that
provides extra strength
for powerful skiing plus
enhanced lateral energy
transmission for better
edge grip.ProliteProlite
is a way of building skis
and boots that turns
traditional thinking on
its head. Instead of
starting with a standard
construction and cutting
material away to save
weight, Prolite does the
opposite. It starts with
the slimmest possible
profile and then it
builds up reinforcements
in key areas where
strength is
needed.SpecificationCategory:
BackcountryFlex: 120Last
Width: 100-106Custom
Shell: yesCustom Liner:
yesPower Strap: Velcro
50mmVolume:
medium-highClips: Sole
Unit: Grip Walk (ISO
9523)Pin Inserts: YesHike
Mode: yesRange Of Motion:
54Weight (g): 1852Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£300.00
Available
-
The new version of the
Cochise is both stronger
and lighter, an
impressive upgrade on
what was already a class
leading offering for
skiers who demand the
best downhill performance
plus comfort and ease for
ascending. The most
noticeable change is the
T-Ride hike system that
increases the range of
motion as well as
improving the strength
and power transfer.
C.A.S. is still present
on the shell and liner,
as well as the tongue
now, meaning
customisation is simple
and very effective to
achieve a truly
personalised fit.Ability
LevelOverviewFitGood heel
hold, medium mid-foot
and comfy toe box.Shell
PU shell with PP cuff and
Carbon Co-injected Back
Spine, mouldable. PU on
the shell provides the
strength and the
Asymmetric Power
Transmission uses thicker
plastic on the
medial/inside part of the
boot ensuring more
lateral power transfer
and increased edge grip.
The PP on the cuff helps
to keep the weight
down.LinerPerformance
C.A.S, mouldable, with
Floating Tongue,
Celliant and fibreglass
collar. The Cochise
C.A.S. liners are light,
anatomically shaped for
optimal comfort and great
heel hold. The dual
density micro-cells
material is durable and
easy to customize. For
unmatched personal
customisation, the
C.A.S. liner can be
thermo-moulded, punched
and grinded. The new
folding structure on the
back ensures easy hiking.
Celliant transforms your
body's heat into
full-spectrum infrared
energy, promoting local
circulation and cell
oxygenation while keeping
you drier and at the
perfect temperature.Key
FeaturesT-RideThe T-Ride
system is fully
integrated into the boot
design. It's a solid
cuff-to-shell connection
which delivers the
perfect combination
between downhill
performance and uphill
hiking ability. The
design makes it easy and
intuitive, you will
always be sure whether is
on ski or hiking mode.
The integrated lock
system screw ensures that
the mechanism stays
closed even during hard
cliff landings or impact
with rocks. 50 degrees
range of motion allows a
comfortable hike up to
the summit when in walk
mode; the T-Ride longer
lever arm guarantees a
quicker edge to edge
transition, increased
lateral power and
stability.C.A.S. (Custom
Adaptive Shell)The C.A.S.
Fit System gives the
ability to customise the
ski boot for a truly
personal fit. The
anatomical shape of the
liner and shell are the
key to a great
out-of-the-box fit. The
closer the liner and
shell match he natural
shape of the foot, the
better the fit and
performance will be. The
C.A.S. shell has dimples
on the shell that reduce
surface tension and
facilitate the thermo
customisation process.
The dual density
micro-cells material of
the C.A.S. liner is
durable and easy to
customize, and for
unmatched personal
customisation the. liner
can be thermo-moulded,
punched and grinded. The
C.A.S. Tongue is a great
addition to the C.A.S.
customisation system, it
can be thermoformed in a
few minutes to perfectly
match the shape of your
shin, reducing shin pain
and increasing
performance.Quick
InstepThe instep material
is softer, making
stepping in and out easy
and avoiding unnecessary
pain, especially at low
temperatures.Asymmetric
Power TransmissionThe
inside of the boot is
made with thicker plastic
to increase support where
needed. This provides
more lateral power
transmission and
increased edge grip.Free
MoveThe new hinge point
allows frictionless
hiking, so you can hike
more with less
energy.Arch GripToe and
heel Vibram® rubbered
soles are connected by
the rubber Arch Grip that
delivers more versatility
in the daily usage. It
supplies more grip on
mountain terrain, on
metal ladders, on
snowmobiles, and so
on.SpecificationCategory:
BackcountryFlex: 120Last
Width: 99Custom Shell:
NoCustom Liner: YesPower
Strap: Velcro 45mmVolume:
MediumClips: 4 x Light
Buckles,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, T Ride Hike
SystemRange of Motion:
50Weight (g): 1750 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£550.00
Available
-
Sammy Carlson's Full Tilt
Ascendant SC is the
tech-compatible boot that
won't sacrifice
performance on the
downhill. A comfortable
Tour Pro Wrap Liner,
removable 120 Flex Tongue
and lightweight evolution
3-Piece Shell work
together to make the
Ascendant SC progressive
and innovative within the
resort ropes and
beyond.Ability
LevelOverviewFitA
slighlty more relaxed
feel compared to most
tour/backcountry boots.
Medium volume around the
rear foot and generous in
the forefoot with some
adaptability over the
instep because of the
cabrio design.Shell
LinerSpecificationCategory:
BackcountryFlex: 120Last
Width: 102Custom Shell:
noCustom Liner: yesPower
Strap: CinchVolume:
medium-highClips: Sole
Unit: Grip Walk (ISO
9523)Pin Inserts: YesHike
Mode: yesRange Of Motion:
40/60Weight (g):
1930Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£425.00
Available
-
The Shift Pro 130 is for
skiers who mix up riding
lifts with hiking for
better terrain. Coreframe
ensures the boot has the
power and control for
skiing bigger lines;
Surelock is simple and
effective, providing 40
degrees of motion for
walking and the necessary
strength to compete with
alpine models. The Custom
Shell HD and the
pre-formed, seamless 3D
Custom Fit Race liner are
both heat moulded to for
a personalised shape,
ensuring the best comfort
and foot hold. A Grilamid
cuff keeps the weight
down and the flex
consistent.Ability
LevelOverviewFitSnug rear
foot with generous room
around the forefoot, the
instep height is average
to high and the toe shape
is rounded.Shell Polyamid
and Polyolefin Custom
Shell HD, mouldable.
Durable, light and
temperature stable with a
true alpine flex when
skiing. The Custom Shell
HD process aims to bring
fast personalisation to
the shell of your boots
in just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
The shell is reinforced
with an Xecarb
Coreframe.LinerMy
CustomFit 3D Seamless
Race with walk function,
mouldable. This Seamless
Race liner features a
softer part which bends
easily to follow the
movement of the cuff in
hiking mode and ensures a
natural movement of the
leg when touring.Key
FeaturesCoreframeThe
Coreframe is an insert
that guarantees the
boot's stiffness after
the Custom Shell HD
process. It brings
lightness, enhances
sensations and increases
power.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Sensifit
InsertsThe soft PU
Sensifit insert on the
external side of the
shell makes it super easy
to get in the boot,
delivering comfy step-in
and anatomical wrapping
of the instep.Sense Claw
45mmTwo positions for
adapted fit and
sensations options. The
unhooked position allows
you to reach the right
level of progressiveness
and rebound, while the
hooked position ensures
maximum stiffness and
performance.Riveted
Oversized PivotsThe
Riveted Oversized Pivot
ensures perfect power
transmission between cuff
and shell.3D BuckleChoose
from 3 different
positions of the instep
buckle for optimum
in-step comfort, full
customisation and
personalised foot
hold.SpecificationCategory:
BackcountryFlex: 130Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Cinch
45mmVolume:
Medium-HighClips: 4 x
Riveted Aluminium,
Microadjustable (1 x 3D),
2 Hiking HooksSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Surelock
skiwalkRange of Motion:
40Weight (g): 1631 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£378.00
Available
-
The Shift Pro 130 is for
skiers who mix up riding
lifts with hiking for
better terrain. Coreframe
ensures the boot has the
power and control for
skiing bigger lines;
Surelock is simple and
effective, providing 40
degrees of motion for
walking and the necessary
strength to compete with
alpine models. The Custom
Shell HD and the
pre-formed, seamless 3D
Custom Fit Race liner are
both heat moulded to for
a personalised shape,
ensuring the best comfort
and foot hold. A Grilamid
cuff keeps the weight
down and the flex
consistent.Ability
LevelOverviewFitSnug rear
foot with generous room
around the forefoot, the
instep height is average
to high and the toe shape
is rounded.Shell Polyamid
and Polyolefin Custom
Shell HD, mouldable.
Durable, light and
temperature stable with a
true alpine flex when
skiing. The Custom Shell
HD process aims to bring
fast personalisation to
the shell of your boots
in just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
The shell is reinforced
with an Xecarb
Coreframe.LinerMy
CustomFit 3D Seamless
Race with walk function,
mouldable. This Seamless
Race liner features a
softer part which bends
easily to follow the
movement of the cuff in
hiking mode and ensures a
natural movement of the
leg when touring.Key
FeaturesCoreframeThe
Coreframe is an insert
that guarantees the
boot's stiffness after
the Custom Shell HD
process. It brings
lightness, enhances
sensations and increases
power.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Sensifit
InsertsThe soft PU
Sensifit insert on the
external side of the
shell makes it super easy
to get in the boot,
delivering comfy step-in
and anatomical wrapping
of the instep.Sense Claw
45mmTwo positions for
adapted fit and
sensations options. The
unhooked position allows
you to reach the right
level of progressiveness
and rebound, while the
hooked position ensures
maximum stiffness and
performance.Riveted
Oversized PivotsThe
Riveted Oversized Pivot
ensures perfect power
transmission between cuff
and shell.3D BuckleChoose
from 3 different
positions of the instep
buckle for optimum
in-step comfort, full
customisation and
personalised foot
hold.SpecificationCategory:
BackcountryFlex: 130Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Cinch
45mmVolume:
Medium-HighClips: 4 x
Riveted Aluminium,
Microadjustable (1 x 3D),
2 Hiking HooksSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Surelock
skiwalkRange of Motion:
40Weight (g): 1631 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£540.00
Available
-
Blending the comfort and
power of the proven Prime
range with the lightness
and natural movement of
the XTD and Backland
models, the Hawx Prime
XTD is where all mountain
skiing meets freeride.
Prolite construction uses
different wall
thicknesses on the shell
to keep the weight down
without affecting the
performance. The tried
and tested Free/Lock hike
and ski system provides
54° of motion, ease of
use and, thanks to the
way it integrates the
energy Backbone, precise
ski control. Memory Fit
on the shell means it can
be heat moulded to even
more closely match the
foot shape; the special
3D Mimic Gold liner takes
an impressive mould of
the heel and ankle area
for the best comfort and
control. Comes with
GripWalk soles and tech
insoles so it can be used
with a range of
bindings.Ability
LevelOverviewFitAn
average fit on the
rearfoot with generous
forefoot width and a
medium to high
instep.Shell Prolite True
Flex PU Memory Fit shell
with PU Memory Fit cuff,
mouldable. The advanced
heat fitting technology
of Memory Fit creates a
fully personalised shell
and cuff in minutes. The
key is Memolink, a
special additive that
improves the mouldability
and stretch
characteristics of the
plastic. The boot shell
is heated in an oven,
then the skier's foot is
placed inside the
complete boot whilst it
cools. With the foot's
natural standing
pressure, the forefoot
of the boot can expand up
to 3mm per side and the
ankle area up to 5mm per
side. True Flex is an
exclusive Atomic shell
material that means your
flex and feel remains
constant in a variety of
temperatures. So, the
boot you buy in store
feels the same on the
mountain, you don't lose
horsepower in the spring
and you don't have a boot
that you can't flex in
mid-winter.LinerMimic
Gold with Touring Flex
Zone, mouldable.
Atomic's unique Mimic
liners use a layer of
supportive thermoformable
material in the heel,
ankle and tongue areas.
After being softened in
an oven, this material
mimics the precise shape
of your foot, and
hardens in that shape for
a perfect custom fit. In
addition there is heat
mouldable foam in the
tongue and ankle area
that can be formed to the
foot at the same time as
the Mimic material.Key
FeaturesFree/Lock
4.0Flick from ski to walk
mode with one simple
switch. In walk mode they
offer an epic cuff
movement. In the ski
setting you can choose
13°/15°/17° via the
adjustable forward
lean.Frictionless
PivotIgus polymer
bushings provide a
completely natural
movement for effortless
ascents.energy
BackboneThe energy
Backbone is a reinforced,
asymmetric backbone that
provides extra strength
for powerful skiing plus
enhanced lateral energy
transmission for better
edge grip.ProliteProlite
is a way of building skis
and boots that turns
traditional thinking on
its head. Instead of
starting with a standard
construction and cutting
material away to save
weight, Prolite does the
opposite. It starts with
the slimmest possible
profile and then it
builds up reinforcements
in key areas where
strength is
needed.SpecificationCategory:
BackcountryFlex: 120Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Velcro
50mmVolume:
Medium-HighClips: 4 x
6000-Series Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Free/Lock 4.0Range
of Motion: 54Weight (g):
1873 (1/2 pair size
26.0)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£530.00
Available
-
Blending the comfort and
power of the proven Prime
range with the lightness
and natural movement of
the XTD and Backland
models, the all new Hawx
Prime XTD is where all
mountain skiing meets
freeride. Prolite
construction uses
different wall
thicknesses on the shell
to keep the weight down
without affecting the
performance. The tried
and tested Free/Lock hike
and ski system provides
54° of motion, ease of
use and, thanks to the
way it integrates the
energy Backbone, precise
ski control. Memory Fit
on the shell means it can
be heat moulded to even
more closely match the
foot shape; the excellent
3D Gold liner takes an
impressive mould of the
heel and ankle area for
the best comfort and
control. Comes with
GripWalk soles and tech
insoles so it can be used
with a range of
bindings.Ability
LevelOverviewFitAn
average fit on the
rearfoot with generous
forefoot width and a
medium to high
instep.Shell Prolite True
Flex PU Memory Fit shell
with PU Memory Fit cuff,
mouldable. The advanced
heat fitting technology
of Memory Fit creates a
fully personalised shell
and cuff in minutes. The
key is Memolink, a
special additive that
improves the mouldability
and stretch
characteristics of the
plastic. The boot shell
is heated in an oven,
then the skier’s
foot is placed inside the
complete boot whilst it
cools. With the
foot’s natural
standing pressure, the
forefoot of the boot can
expand up to 3mm per side
and the ankle area up to
5mm per side. True Flex
is an exclusive Atomic
shell material that means
your flex and feel
remains constant in a
variety of temperatures.
So, the boot you buy in
store feels the same on
the mountain, you
don’t lose
horsepower in the spring
and you don’t have
a boot that you
can’t flex in
mid-winter.Liner3D Gold
with Touring Flex Zone,
mouldable. Thermoformable
material is used in the
heel, ankle and midfoot
areas. The liner is
heated in an oven and is
cooled to form to the
shape of the
skier’s feet. 3D
means pre-shaped heel and
ankles areas for better
foot hold and comfort. A
special construction in
the rear of the liner
allows it to flex
backwards for a more
comfortable range of
motion when the walk mode
is being used.Key
FeaturesFree/Lock
4.0Flick from ski to walk
mode with one simple
switch. In walk mode they
offer an epic cuff
movement. In the ski
setting you can choose
13o/150/17o via the
adjustable forward
lean.Frictionless
PivotIgus polymer
bushings provide a
completely natural
movement for effortless
ascents.energy
BackboneThe energy
Backbone is a reinforced,
asymmetric backbone that
provides extra strength
for powerful skiing plus
enhanced lateral energy
transmission for better
edge grip.ProliteProlite
is a way of building skis
and boots that turns
traditional thinking on
its head. Instead of
starting with a standard
construction and cutting
material away to save
weight, Prolite does the
opposite. It starts with
the slimmest possible
profile and then it
builds up reinforcements
in key areas where
strength is
needed.SpecificationCategory:
BackcountryFlex: 120Last
Width: 100-106Custom
Shell: yesCustom Liner:
yesPower Strap: Velcro
50mmVolume:
medium-highClips: Sole
Unit: Grip Walk (ISO
9523)Pin Inserts: YesHike
Mode: yesRange Of Motion:
54Weight (g): 1852Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£400.00
Available
-
Blending the comfort and
power of the proven Prime
range with the lightness
and natural movement of
the XTD and Backland
models, the Hawx Prime
XTD is where all mountain
skiing meets freeride.
Prolite construction uses
different wall
thicknesses on the shell
to keep the weight down
without affecting the
performance. The tried
and tested Free/Lock hike
and ski system provides
54deg of motion, ease of
use and, thanks to the
way it integrates the
energy Backbone, precise
ski control. Memory Fit
on the shell means it can
be heat moulded to even
more closely match the
foot shape; the special
3D Mimic Gold liner takes
an impressive mould of
the heel and ankle area
for the best comfort and
control. Comes with
GripWalk soles and tech
insoles so it can be used
with a range of
bindings.Ability
LevelOverviewFitAn
average fit on the
rearfoot with generous
forefoot width and a
medium to high
instep.Shell Prolite True
Flex PU Memory Fit shell
with PU Memory Fit cuff,
mouldable. The advanced
heat fitting technology
of Memory Fit creates a
fully personalised shell
and cuff in minutes. The
key is Memolink, a
special additive that
improves the mouldability
and stretch
characteristics of the
plastic. The boot shell
is heated in an oven,
then the skier's foot is
placed inside the
complete boot whilst it
cools. With the foot's
natural standing
pressure, the forefoot
of the boot can expand up
to 3mm per side and the
ankle area up to 5mm per
side. True Flex is an
exclusive Atomic shell
material that means your
flex and feel remains
constant in a variety of
temperatures. So, the
boot you buy in store
feels the same on the
mountain, you don't lose
horsepower in the spring
and you don't have a boot
that you can't flex in
mid-winter.LinerMimic
Gold with Touring Flex
Zone, mouldable.
Atomic's unique Mimic
liners use a layer of
supportive thermoformable
material in the heel,
ankle and tongue areas.
After being softened in
an oven, this material
mimics the precise shape
of your foot, and
hardens in that shape for
a perfect custom fit. In
addition there is heat
mouldable foam in the
tongue and ankle area
that can be formed to the
foot at the same time as
the Mimic material.Key
FeaturesFree/Lock
4.0Flick from ski to walk
mode with one simple
switch. In walk mode they
offer an epic cuff
movement. In the ski
setting you can choose
13o/150/17o via the
adjustable forward
lean.Frictionless
PivotIgus polymer
bushings provide a
completely natural
movement for effortless
ascents.energy
BackboneThe energy
Backbone is a reinforced,
asymmetric backbone that
provides extra strength
for powerful skiing plus
enhanced lateral energy
transmission for better
edge grip.ProliteProlite
is a way of building skis
and boots that turns
traditional thinking on
its head. Instead of
starting with a standard
construction and cutting
material away to save
weight, Prolite does the
opposite. It starts with
the slimmest possible
profile and then it
builds up reinforcements
in key areas where
strength is
needed.SpecificationCategory:
BackcountryFlex: 120Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Velcro
50mmVolume:
Medium-HighClips: 4 x
6000-Series Aluminium,
MicroadjustableSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Free/Lock 4.0Range
of Motion: 54Weight (g):
1873 (1/2 pair size
26.0)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£530.00
Available
-
Roxa are quietly making a
name for themselves with
the excellent R3
Ultralight range and this
latest version of the R3
130 T.I. is sure to
continue this. It’s a
powerful freeride boot
that really does flex
like a 130 alpine model.
The Cabrio design uses a
3-piece construction of
shell, cuff and tongue
that comfortably and
securely holds the foot
whilst producing a smooth
and progressive flex.
This open throat design
ensures easy entry and
exit and means high shell
walls can be used to
provide excellent power
transmission, without
making the boot over
stiff. Grilamid on the
shell and cuff mean the
weight is kept down
without affecting
performance. The shell
utilises Biofit
technology, these are
preformed shapes in
common problem areas at
the 1st and 5th
metatarsal heads, ankle
and navicular, to ease
pressure and create a
natural feel. To improve
on this the shell can be
heat moulded for a better
fit, and the liner is
the brilliant Intuition
tongue version that is
formed during fitting to
take the best shape of
the skier’s feet.
Availability: In Stock
£375.00
Available
-
Using many features of
the top-end models in the
range, the Hawx Prime
XTD 100 HT is an
excellent introduction in
to the world of BC ski
boots providing
performance, comfort and
excellent value. Prolite
construction uses
different thicknesses of
shell wall to balance
lightweight with power
and control. The
Free/Lock hike and ski
system provides 54deg of
motion, ease of use and,
thanks to the way it
integrates the Energy
Backbone, precise ski
control. Memory Fit on
the shell means it can be
heat moulded to even more
closely match the foot
shape; the 3D Silver
Touring liner takes a
mould of the heel and
ankle area for the best
comfort and control.
Comes with GripWalk soles
and tech insoles at the
toes (not at the heel) so
it can be used with a
range of bindings.
Ability Level Overview
Fit An average fit on the
rearfoot with generous
forefoot width and a
medium to high instep.
Shell Prolite PU Memory
Fit shell with PU Memory
Fit cuff, mouldable. The
advanced heat fitting
technology o...
Availability: In Stock
£370 GBP
Available
-
Salomon's S/LAB MTN
impresses both freeriders
and tourers thanks to
remarkable comfort on the
way up and no-compromise
performance on the way
down. A Pebax cuff and
Grilamid+ shell keep
weight low and deliver
precise control.
Oversized pivots,
Sensifit Shell and BC
Carbon Spine all help to
beef up the power without
adding valuable grams.
The fully mouldable liner
and shell ensure the best
possible fit; 47 degrees
of motion boosts walking
ease and Contragrip soles
improve grip.Ability
LevelOverviewFitGrippy
heel pocket, medium
instep with average to
narrow forefoot and
angular tapered toe
box.Shell Pebax cuff,
Grilamid clog, Custom
Shell HD, mouldable.
High-quality polyamide
plastic which provides
adapted rigidity,
lightness and downhill
performance. The Custom
Shell HD process aims to
bring fast
personalisation to
the shell of your boots
in just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
Uses a Carbon Spine
touring design for light
yet strong and stiff rear
support when
skiing.LinerMy CustomFit
3D Freetouring,
mouldable. A new material
pattern creates a more
inclusive fit, avoiding
pressure points and a new
foam construction ensures
lightness and comfort.Key
Features2 Riveted Light
and Lock System
BucklesThe buckle
situated on the cuff
offers a specific tooth
that keeps the cuff
closed while offering
great range of motion
when skinning or walking
up.Motion FlexTouring
cuff construction with a
spine made of carbon and
composite fibre. It
allows a high range of
motion when skinning
while guaranteeing a true
and progressive alpine
flex.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Dual Claw
50mm PowerstrapInspired
by racing and designed to
ensure maximum power
transmission, this strap
is made with a claw
system to allow for low
elasticity and provide
better leg hold.Contagrip
Rubber SoleGripWalk pads
are pre-mounted and their
specific shape improves
walking comfort and grip
whatever the
conditions.SpecificationCategory:
BackcountryFlex: 120Last
Width: 98-104Custom
Shell: YesCustom Liner:
YesPower Strap: Dual Claw
50mmVolume:
Medium-LowClips: 2 x
Riveted Light,
MicroadjuastableSole
Unit: Tour (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Surelock
skiwalkRange of Motion:
47Weight (g): 1570 (1/2
pair size 26.5)Binding
Compatibility: Multi
Norm, PinCert, Pin
Availability: In Stock
£520.00
Available
-
The Strider 120 allows
you to fully explore the
mountain whether using
lifts or hiking for extra
vert. Tri-Fit
Customisation uses an
infra-red ready shell
that can be easily
expanded, screw-in
components for simple
changes and a 3D Custom
Cork mouldable liner with
PrimaLoft for warmth and
durability. The
exceptional fit and
comfort is matched by the
performance: 46o range of
motion aids ascents, the
lightweight cuff and Tri
Force construction ensure
power without excess
weight and Michelin Grip
Walk soles improve
traction.
Availability: In Stock
£336.00
Available
-
Charge down and climb
back up, the Shift Pro
is a versatile boot that
is as happy running laps
from lifts as it is
hiking to earn the goods.
The shape is based on the
successful S/Pro so it
has a comfortable medium
volume fit. This can be
fine-tuned with Salomon's
excellent Custom Shell HD
mouldable shell and the
pre-shaped, seamless
Custom Fit 3D liner that
is moulded to the skier's
foot during fitting.
Coreframe construction
ensures lightness and
provides power; the
Surelock ski/walk system
is secure and simple with
a 40 degree range of
motion.Ability
LevelOverviewFitSnug rear
foot with generous room
around the forefoot, the
instep height is average
to high and the toe shape
is rounded.Shell Polyamid
and Polyolefin cuff, PU
clog, Custom Shell HD,
mouldable. Durable and
light with a true alpine
flex when skiing. The
Custom Shell HD process
aims to bring fast
personalisation to
the shell of your boots
in just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
The shell is reinforced
with a fibreglass
Coreframe.LinerMy
CustomFit 3D Seamless Pro
with walk function,
mouldable. This Seamless
Pro liner features a
softer part which bends
easily to follow the
natural movement of the
leg while walking.Key
FeaturesCoreframeThe
Coreframe is an insert
that guarantees the
boot's stiffness after
the Custom Shell HD
process. It brings
lightness, enhances
sensations and increases
power.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Sensifit
InsertsThe soft PU
Sensifit insert on the
external side of the
shell makes it super easy
to get in the boot,
delivering comfy step-in
and anatomical wrapping
of the instep.360° 45mm
PowerstrapA thick 45mm
strap to hold the foot
securely and optimize
power
transmission.Riveted
Oversized PivotsThe
Riveted Oversized Pivot
ensures perfect power
transmission between cuff
and shell.3D BuckleChoose
from 3 different
positions of the instep
buckle for optimum
in-step comfort, full
customisation and
personalised foot
hold.SpecificationCategory:
BackcountryFlex: 120Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Velcro
45mmVolume:
Medium-HighClips: 4 x
Riveted Aluminium,
Microadjustable (1 x 3D),
2 Hiking HooksSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Surelock
skiwalkRange of Motion:
40Weight (g): 1709 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£322.00
Available
-
Blending the comfort and
power of the proven Prime
range with the lightness
and natural movement of
the XTD and Backland
models, the all new Hawx
Prime XTD is where all
mountain skiing meets
freeride and backcountry.
Memory Fit on the shell
means it can be heat
moulded to even more
closely match the foot
shape; the excellent
Mimic Platinum liner uses
a unique process to take
an impressive mould of
the heel and ankle area
for the best comfort and
control. Comes with
GripWalk soles and tech
insoles so it can be used
with a range of bindings.
Ability Level Overview
Fit An average fit on the
rearfoot with generous
forefoot width and a
medium to high instep.
Shell Prolite Memory Fit
Polyamide (PA) shell and
PU cuff, mouldable. The
advanced heat fitting
technology of Memory Fit
creates a fully
personalised shell and
cuff in minutes. The key
is Memolink, a special
additive that improves
the mouldability and
stretch characteristics
of the plastic. The boot
shell is heated in an
oven, then...
Availability: In Stock
£530 GBP
Available
-
The new Maestrale RS2
betters its namesake of
old, coming in lighter
and stronger than before.
A Grilamid/Carbon
Grilamid LFT construction
saves crucial weight
without losing
performance. This boot is
filled with features to
make switching from ski
to tour mode simple
without ever having to
take your gloves off such
as Speed Lock Plus, Wave
Closure System and Thor
Buckles. The Intuition
liner is 100% mouldable
for the best possible
fit.
Availability: In Stock
£318.00
Available
-
The Maestrale XT is the
new kid on the block from
Scarpa, taking the best
bits from the hugely
successful Maestrale RS
and tweaking them to
boost freeride
performance for tackling
the steepest lines and
fastest descents. It uses
the same carbon infused
Grilamid lower clog and
adds a stiffer and
stronger 2-buckle alpine
unit, complete with
beefy Booster power
strap. Vibram soles
increase grip, a
Speedlock XT ski/walk
mechanism is friction
free and the Wave Closure
System provides
lightweight and secure
closure. Ability
LevelOverviewFitFirm hold
around the rear foot,
medium width across the
forefoot and over the
instep but being a 3
piece shell there is some
flexiblity for volume
over the top of the
foot.Shell Carbon
Grilamid LFT shell,
Grilamid cuff,
mouldable. The Carbon
Grilamid Web Frame on the
shell provides downhill
power for responsive
skiing, whilst remaining
lightweight. The Grilamid
Bi-Injection Overlap cuff
promotes instant
transmission; on the XT
the cuff is larger than
the RS version for a feel
more similar to a
traditional overlap. A
Pebax Axial Alpine evo
technology tongue blends
overlap power and the
ease of a cabrio style
entry, resulting in more
comfort, control and
precision.LinerIntuition
Cross Fit Pro Flex Ride,
mouldable. Intuition
closed cell foam is body
heat activated to mould
100% to your feet and
shells during use, or
can be instantly heat
moulded by a shop in
minutes for a light,
warm and super
comfortable fit. A super
warm and lightweight
Thermoformable liner,
for superior comfort for
perfectly matching the
foot. Developed with
specific flex zone for
maximum agility and more
comfort advantages in
uphill.Key FeaturesWave
Closure SystemProvides a
lightweight and secure
closure, comfortably
wrapping the
foot.Speedlock XT
Ski/Walk
mechanismFriction free
and rock solid for
powerful skiing and a 56o
range of motion when in
walk mode.ReCCO
TechnologyWith the aid of
ReCCO technology, rescue
teams can track you in
the event of an
avalanche. The technology
includes ReCCO reflectors
attached to clothing,
helmets, guards and
boots, and ReCCO
detectors used by over
800 rescue organisations
worldwide. The reflectors
and detectors allow users
to track missing
individuals thanks to the
use of harmonic radar
technology. ReCCO
technology is an
additional tool that can
be used alongside
avalanche transceivers,
probes and rescue dogs.
The technology enables
rescue organisations to
find buried or lost
individuals quicker and
to increase the chance of
survival.SpecificationCategory:
BackcountryFlex: 130+Last
Width: 101Custom Shell:
noCustom Liner: yesPower
Strap: CinchVolume:
mediumClips: Sole Unit:
Tour (ISO 9523)Pin
Inserts: YesHike Mode:
yesRange Of Motion:
56Weight (g): 1490Binding
Compatibility: Multi
Norm, PinCert, Pin
Availability: In Stock
£420.00
Available
-
The Shift Pro 130 is for
skiers who mix up riding
lifts with hiking for
better terrain. Coreframe
ensures the boot has the
power and control for
skiing bigger lines;
Surelock is simple and
effective, providing 40
degrees of motion for
walking and the necessary
strength to compete with
alpine models. The Custom
Shell HD and the
pre-formed, seamless 3D
Custom Fit Race liner are
both heat moulded to for
a personalised shape,
ensuring the best comfort
and foot hold. A Grilamid
cuff keeps the weight
down and the flex
consistent.Ability
LevelOverviewFitSnug rear
foot with generous room
around the forefoot, the
instep height is average
to high and the toe shape
is rounded.Shell Polyamid
and Polyolefin Custom
Shell HD, mouldable.
Durable, light and
temperature stable with a
true alpine flex when
skiing. The Custom Shell
HD process aims to bring
fast personalisation to
the shell of your boots
in just 10 minutes. The
thinner wall construction
and new shell materials
allow the foot to be
closer to the shell and
provide enhanced
sensations, more power
and direct transmission.
The shell is reinforced
with an Xecarb
Coreframe.LinerMy
CustomFit 3D Seamless
Race with walk function,
mouldable. This Seamless
Race liner features a
softer part which bends
easily to follow the
movement of the cuff in
hiking mode and ensures a
natural movement of the
leg when touring.Key
FeaturesCoreframeThe
Coreframe is an insert
that guarantees the
boot's stiffness after
the Custom Shell HD
process. It brings
lightness, enhances
sensations and increases
power.Surelock Ski
WalkSecure and simple
walk mechanism, that
enables a great range of
motion for walking,
and locks for skiing
performance.Sensifit
InsertsThe soft PU
Sensifit insert on the
external side of the
shell makes it super easy
to get in the boot,
delivering comfy step-in
and anatomical wrapping
of the instep.Sense Claw
45mmTwo positions for
adapted fit and
sensations options. The
unhooked position allows
you to reach the right
level of progressiveness
and rebound, while the
hooked position ensures
maximum stiffness and
performance.Riveted
Oversized PivotsThe
Riveted Oversized Pivot
ensures perfect power
transmission between cuff
and shell.3D BuckleChoose
from 3 different
positions of the instep
buckle for optimum
in-step comfort, full
customisation and
personalised foot
hold.SpecificationCategory:
BackcountryFlex: 130Last
Width: 100-106Custom
Shell: YesCustom Liner:
YesPower Strap: Cinch
45mmVolume:
Medium-HighClips: 4 x
Riveted Aluminium,
Microadjustable (1 x 3D),
2 Hiking HooksSole Unit:
Grip Walk (ISO 9523)Pin
Inserts: YesHike Mode:
Yes, Surelock
skiwalkRange of Motion:
40Weight (g): 1631 (1/2
pair size 26.5)Binding
Compatibility: Grip Walk,
Multi Norm, PinCert,
Pin
Availability: In Stock
£540.00
Archived Product
-
Scarpa have created the
Magic with women in mind,
where the cuff opens
much more, providing
longer comfortable
walking strides. It's
lightweight, easy to use
and is compatible with
all ski touring bindings.
Please note this boot has
the Scarpa Thermo liner
fitted, not the
Intuition liner.
Availability: In Stock
£199.14
Denmark