United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Snowboard Accessories
Available
-
Update your old laces or
stash an extra pair in
your bag for unexpected
breaks. The DAKINE Oval
snowboard boot laces
facilitate easy cinching
and wont slip or stretch.
Features Oval Laces 90
[ 228cm ] long 100%
Polyester Wont slip or
stretch Oval Profile for
easy cinching
Availability: In Stock
£4.00
Available
-
A pair of mega-sized Crab
Grab claws for your
snowboard, so big a pair
will do the trick, and
help you to do yours!
Supplied in black and
white, 1 pair - 1 left
and 1 right. Snap em up!
Fitting Tip: Heat up the
glue before applying with
a hair dryer and your
board surface too - dont
go too hot though!
Availability: In Stock
£13.50
Available
-
Just open a pair of these
for immediate warmth for
up to 7 hours. A
favourite for many
outdoor enthusiasts (Not
just winter sports) these
are compact enough to go
in your pocket, or
inside your ski/snowboard
gloves. To activate
simply remove the inner
packaging and squeeze a
few times.Contains 1 pair
of warmersOur
OpinionFantastic idea,
and great value for
money, giving you a good
few hours of warmth, We
have used these on the
mountains, and watching
rally super-specials in
Wales. Highly
recommended!Is This For
Me?If you suffer from
cold hands or have no
wish to find out, put a
couple of packs of these
into your hold luggage,
you won't regret it!
Availability: In Stock
£1.25
Available
-
Translucent molded spike
pattern for maximum
traction. Sections can be
cut apart and
reconfigured. Black
colour option. DAKINE
uses only the finest peel
and stick adhesives to
ensure easy installation
and secure attachment.
Please read and follow
the instructions for best
results. Features
Translucent molded spike
pattern for maximum
traction Sections can be
cut apart and
reconfigured Specs Size
4.7 x 4.7 [ 120mm x 120mm
] Weight 2.2 oz [ 62g
] Instructions FOR
OPTIMUM BONDING: 1.
Board and stomp should be
at room temperature, 70
F [ 21 C ] 2. Clean
surface with rubbing
alcohol. Surface must
remain clean, smooth and
dry. Do not touch. 3.
Use a blow dryer on high
to heat up the prepared
board surface as well as
the adhesive on the
traction device. 4.
Immediately after
heating, place the stomp
and press firmly. Stand
on the stomp without
twisting, the more
weight the better. 5.
Allow the adhesive to
cure at room temperature
for 24 hours.
Availability: In Stock
£10.00
Available
-
A 3 piece snowboard stomp
pad that allows you to
fine tune the positioning
and extent of grip
required depending on
your personal preference.
This is the rasta colour
option. Features Molded
urethane Three
configurable pieces
Specification Size 4 x
4 [ 100mm x 100mm ]
Weight . 6 oz. [ 17g ]
Instructions FOR
OPTIMUM BONDING: 1.
Board and stomp should be
at room temperature, 70
F [ 21 C ] 2. Clean
surface with rubbing
alcohol. Surface must
remain clean, smooth and
dry. Do not touch. 3.
Use a blow dryer on high
to heat up the prepared
board surface as well as
the adhesive on the
traction device. 4.
Immediately after
heating, place the stomp
and press firmly. Stand
on the stomp without
twisting, the more
weight the better. 5.
Allow the adhesive to
cure at room temperature
for 24 hours.
Availability: In Stock
£8.00
Available
-
The Dakine Pyramid Studs
in White are a set of
studs to fix to the board
in your own design
pattern that then gives
extra grip when riding
off lifts etc when both
feet are not bound into
the board. Nickle plated
aluminium with Dakines
special double sided
application tape. Sold in
packs of 9. Please see
Buyers Guide for
Instructions. Features
Plated aluminum Nine per
pack Specifications
Size. 6 x. 6 [ 16mm x
16mm ] Weight. 7oz. [
23g ]
Availability: In Stock
£10.00
Available
-
A modern twist on the
stomp pad,
these Dum Drops allow
you to add grip exactly
where you want it. This
is the green stripes
pack. DAKINE uses only
the finest peel and stick
adhesives to ensure easy
installation and secure
attachment. Please read
and follow the
instructions for best
results. Features Molded
urethane Specification
Size . 6 x. 6 [ 16mm x
16mm ] Weight . 1 oz.
[ 28g ] Instructions FOR
OPTIMUM BONDING: 1.
Board and stomp should be
at room temperature, 70
F [ 21 C ] 2. Clean
surface with rubbing
alcohol. Surface must
remain clean, smooth and
dry. Do not touch. 3.
Use a blow dryer on high
to heat up the prepared
board surface as well as
the adhesive on the
traction device. 4.
Immediately after
heating, place the stomp
and press firmly. Stand
on the stomp without
twisting, the more
weight the better. 5.
Allow the adhesive to
cure at room temperature
for 24 hours.
Availability: In Stock
£10.00
Available
-
A 3 piece snowboard stomp
pad that allows you to
fine tune the positioning
and extent of grip
required depending on
your personal preference.
This is the rasta colour
option. Features Molded
urethane Three
configurable pieces
Specification Size 4 x
4 [ 100mm x 100mm ]
Weight . 6 oz. [ 17g ]
Instructions FOR
OPTIMUM BONDING: 1.
Board and stomp should be
at room temperature, 70
F [ 21 C ] 2. Clean
surface with rubbing
alcohol. Surface must
remain clean, smooth and
dry. Do not touch. 3.
Use a blow dryer on high
to heat up the prepared
board surface as well as
the adhesive on the
traction device. 4.
Immediately after
heating, place the stomp
and press firmly. Stand
on the stomp without
twisting, the more
weight the better. 5.
Allow the adhesive to
cure at room temperature
for 24 hours.
Availability: In Stock
£8.00
Available
-
A modern twist on the
stomp pad,
these Dum Drops allow
you to add grip exactly
where you want it. This
is the black patterns
pack. DAKINE uses only
the finest peel and stick
adhesives to ensure easy
installation and secure
attachment. Please read
and follow the
instructions for best
results. Features Molded
urethane Specification
Size . 6 x. 6 [ 16mm x
16mm ] Weight . 1 oz.
[ 28g ] Instructions FOR
OPTIMUM BONDING: 1.
Board and stomp should be
at room temperature, 70
F [ 21 C ] 2. Clean
surface with rubbing
alcohol. Surface must
remain clean, smooth and
dry. Do not touch. 3.
Use a blow dryer on high
to heat up the prepared
board surface as well as
the adhesive on the
traction device. 4.
Immediately after
heating, place the stomp
and press firmly. Stand
on the stomp without
twisting, the more
weight the better. 5.
Allow the adhesive to
cure at room temperature
for 24 hours.
Availability: In Stock
£10.00
Available
-
With these star studs
from Dakine, you are
able to fix them to your
board the way you want
to, resulting in extra
grip when you need it.
PRODUCT FEATURES Peel and
stick star stomps Nickle
Plated Aluminium Four per
pack ITEM
SPECIFICATION Size: 18mm
x 18mm Weight: 17g
Availability: In Stock
£10.00
Denmark