United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Base Repair
Available
-
Metal Grip is an
expoxy-P-Tex mix used to
dress deep gouges in ski
bases which have exposed
the core, or gouges next
to the ski or snowboard
edge.It is applied
ideally with a soldering
iron such as the Kunzmann
Base Doc II (See below)
and becomes active at a
lower heat, acting as a
dressing before P-Tex
application. When using
we recommend strong
ventilation due to the
potency of the product,
and also once applied,
leave for a good period
of time to ensure
thorough adhesion.Once
applied and dry, apply
p-tex, and this should
result in a much more
permanent repair,
protecting the core of
your skis or board, and
if near an edge offering
enough adhesion to reduce
weakness next to the
edge.Always prepare the
area you are going to
Metal Grip to make sure
it is clean and clear of
debris/fibres.Recommended
for competent ski
technicians. Â
Availability: In Stock
£2.25
Available
-
Repair pistols are a key
component in a
professional ski/board
technicians workshop,
but cost many hundreds of
pounds. Power Adhesives,
manufacturers of glue
guns and pro workshop
repair pistols have taken
their knowledge from glue
guns, talked to UK ski
and snowboard technicians
such as ourselves, and
created a compact repair
pistol for the home DIY
person. Running safely at
a much higher temperature
than a traditional glue
gun, it has a customised
application nib, for
smooth application of
repair material to your
base. This gun kit comes
complete with a support
stand 4 1/2 polymer
repair sticks to allow
you to learn before first
live application. EVERY
gun is tested before
packing, so you will
find some residual repair
material in the pistol.
This does NOT mean it is
used! Power Adhesives
have a 100% QC check
process, for customer
safety and assurance.
Contents: Gun, Gun
Stand, 4 x Polymer
Repair Sticks Fitted with
6 foot flex Voltage: 230
Volts Heating Up Time:
10-15 minutes Operating
Temperature: Approx 440
degrees F Diameter Of
Repair Sticks: 1/2 HOW TO
USE To give an extended
tutorial on how to use a
repair gun correctly
would take more than a
paragraph. You can see
repair guns in use by
clicking on the
EDGEANDWAXTVÂ link on our
website and viewing the
workshop videos. As a
basic guide, you should
leave the gun switched on
- in a safe location -
for around 5-7 minutes,
to allow the head to
fully heat up. Once
heated up, only light
trigger pressure should
be required to extrude
repair material onto the
base. Before repairing a
scratch in the base,
ensure it is clean, and
if it is a core shot that
it has been pre-treated
with Metal Grip base
repair material. Then use
the gun to gently heat
the repair area up BEFORE
applying material. Once
heated start at the
furthest point from you
of the scratch, gently
squeeze the trigger and
draw the gun towards you.
Place the gun carefully
back in the stand, and
allow the repair to cool
for as long as possible,
we suggest AT LEAST 15
minutes but if possible
leave overnight for good
adhesion and cooling.
Please note that the gun
may drip a little repair
material when in the
stand. This is normal,
but do allow for this
when you decide where to
place your stand. We also
recommend cleaning the
repair pistol head as
soon as it has cooled
down to remove excess
material, using a metal
scraper, and lightly
sanding when it has
become dirty. We also
recommend using black
repair rods. Clear repair
rods do not always give
as clean a fixation, and
are prone to discolouring
with heat. A black repair
rod gives better adhesion
and durability. Our
Opinion A great tool for
the enthusiastic DIY
ski/board tech. Treated
with respect, a repair
gun can give a very long
lasting and professional
repair. Is This For Me?
If you are looking to set
up a comprehensive home
DIY workshop a repair gun
is a great investment and
will save time on base
repairs giving a more
durable fix.
Availability: In Stock
£54.50
Available
-
For a professional repair
a P-Tex gun and repair
rods are the way to
go.These rods are
specifically for P-Tex
guns with a 12 mm
diameter, and are each
200 mm long.Notes:
Contains 3 repair rods in
either clear or black
colourOur OpinionAs used
in our workshop with our
pro P-Tex guns, these do
give a highly
professional and
permanent repair when
used correctly.Is This
For Me?If you have a
modern P-Tex repair
pistol, these 12 mm
diameter repair sticks
will be required.
Availability: In Stock
£1.75
Available
-
Repair pistols are a key
component in a
professional ski/board
technicians workshop,
but cost many hundreds of
pounds. Power Adhesives,
manufacturers of glue
guns and pro workshop
repair pistols have taken
their knowledge from glue
guns and created a
compact repair pistol for
the home DIY person.
Running safely at a much
higher temperature than a
traditional glue gun, it
has a customised
application nib, for
smooth application of
repair material to your
base. The SKIMENDER RP
360 is a high-performance
ski and snowboard repair
pistol for professional
repairs. It has been
designed and built for
carrying out long-lasting
repairs quickly and
simply. Operating the
SKIMENDER RP 360 is easy
- simply insert a repair
stick into the tool, and
pull the trigger! The
flow rate of the molten
repair material,
extruded through its
unique high-temperature
heated nozzle iron, is
controlled by operator
trigger pressure. Another
unique feature of this
tool is its magnetic,
detachable stand which,
along with a screw-down
metal plate (supplied),
allows the operator to
pick up, use, and
replace the pistol with
ease. No other gun-based
system operates close to
the SKIMENDER RP 360
temperature. The high
temperature of the heated
nozzle iron actually
welds the repair material
to the base, making the
ultimate permanent repair
that will outlast all
others. This gun kit
comes complete with a Tec
Drip Mat, 3 black repair
rods and 3 clear repair
rods. A magnetic stand
for the gun is also
included. Contents: Gun,
Gun Stand, 3 x black
repair sticks, 3 x clear
repair sticks, drip mat,
trigger stand, magnetic
stand Fitted with Euro 2
pin plug and 6 foot flex
Heating Up Time: 10-15
minutes Operating
Temperature: Approx 440
degrees F Diameter Of
Repair Sticks: 1/2 Our
Opinion A great tool for
the more advanced ski and
snowboard tech. Treated
with respect, a repair
gun can give a very long
lasting and professional
repair. Is This For Me?
If you are looking to set
up a comprehensive home
DIY workshop a repair gun
is a great investment and
will save time on base
repairs giving a more
durable fix.
Availability: In Stock
£229.99
Available
-
The HOLMENKOL TriMaxx Alpine
provides a possibility to
improve the gliding
performance of
mechanical grinded and
unstructured skis. Three
structures are available
from this advanced ski
tech tool. If you do not
have £££££ to buy a
diamond stone structure
machine or want a
temporary structure this
tool is ideal. It is so
portable too, making it
popular with racers.
Three different
intermittent structures
are possible: 0, 8 mm for
fine, dry snow 1, 2 mm
for old or moist new snow
1, 6 mm for coarse, wet
to very wet snow HOW TO
USE 1. Fix ski in a good
quality ski vice 2.
Roughen the base surface
with a green Holmenkol
Structure Pad or
sandpaper to improve the
wax absorption 3. Wax as
usual, scrape off and
brush out well 4. Take
the structure tool in
both hands. Adjust it to
the ski breadth and place
it on the ski base, so
that a structure roll and
a roll guide are set on
the ski 5. Apply pressure
on the tool and move it
along the ski, from the
tip to the end 6. As the
TriMaxx Alpine does not
structure the complete
ski base at once, it has
to be turned by 180°
and afterwards the
procedure has to be
repeated 7. Avoid going
back and forth with the
structure tool as this
ruins the structure
more than it helps 8.
Finally, brush out with
a fine brush, such as a
Holmenkol horsehair brush
FEATURES - Structure for
optimal water drain. -
Three structures at one
tool (no work to change
rolls). - Ergonomic roll
guides for precise
structures. - Flexible
roll guides allow
structures on any kind of
ski. Â
Availability: In Stock
£165.00
Available
-
The Kunzmann Base Doc II
is one of our favourite
tools in the workshop,
allowing precision work
with P-Tex and Metal Grip
materials for highest
quality repairs.This is a
lighter-fuel gas powered
soldering iron, so is
quick to heat up, cheap
to refill, and can be
emptied and taken in hold
luggage to allow you to
make high quality
emergency repairs on the
mountain.Unlike a
standard soldering iron,
the cable free nature of
this item allows for easy
control and visibility
however small the repair,
and the custom made tip
allows for easy spread of
material and minimal risk
of damage despite the
high temperature
involved.Please test
carefully before using
this in item, as this is
a tool for more advanced
ski technicians, but for
those that master it is
worth every penny.Â
Availability: In Stock
£85.00
Available
-
The traditional repair
candle which you light
and drip onto the base.
These rods are for
lighting only, always
light with a clean flame
such as a gas lighter for
a cleaner finish.Notes:
Contains 5 repair candles
for lighting only. BLACK
candles.Our OpinionFor
the traditionalists out
there the repair candle
has been used countless
times to deal with base
scrapes on and off the
mountain. For temporary
repairs of the base to
protect the core from
further damage.Is This
For Me?If you want a
traditional repair stick
here it is!
Availability: In Stock
£2.25
Available
-
For a professional repair
a P-Tex gun and repair
rods are the way to
go.These rods are
specifically for P-Tex
guns with a 12 mm
diameter, and are each
200 mm long.Notes:
Contains 10 repair rods
in either clear or black
colourOur OpinionAs used
in our workshop with our
pro P-Tex guns, these do
give a highly
professional and
permanent repair when
used correctly.Is This
For Me?If you have a
modern P-Tex repair
pistol, these 12 mm
diameter repair sticks
will be required.
Availability: In Stock
£5.00
Available
-
For over 80 years,
Holmenkol has been
dedicated to the
production of the finest
ski waxes available.
Today, they lead the
way, with the
introduction of nano
technology, combining
sport with ground
breaking science to
produce a comprehensive
line of waxes and tools,
proven in World Cup use,
and suitable for all
types of winter sports
enthusiasts. Holmenkol
Fibre Fleece (Known as
fibrelene by other
brands) is ideal for
polishing waxes once
applied, without risk of
damage to your board or
skis. Care Fleece is
essential when servicing
skis and boards, it can
be used as part of the
cleaning process and for
polishing. 25 metre
roll.Material: Tear
resistant Fiberlene
sheetSize: 25 Metre roll
20 cm wideOur
OpinionGreat for use in
the workshop, not only
for waxing/polishing,
but also for detecting
nicks in edges without
chopping your fingers up!
The Care Fleece is tear
resistant, and each
sheet can be cut in two
to last even longer.Is
This For Me?If you are
servicing your own kit,
and want a highly
polished finish, then
the Holmenkol Care Fleece
is a useful addition to
your tool box, and is
long lasting.
Availability: In Stock
£9.50
Available
-
Repair pistols are a key
component in a
professional ski/board
technicians workshop,
but cost many hundreds of
pounds.Power Adhesives,
manufacturers of glue
guns and pro workshop
repair pistols have taken
their knowledge from glue
guns and created a
compact repair pistol for
the home DIY
person.Running safely at
a much higher temperature
than a traditional glue
gun, it has a customised
application nib, for
smooth application of
repair material to your
base.The SKIMENDER RP 360
is a high-performance ski
and snowboard repair
pistol for professional
repairs. It has been
designed and built for
carrying out long-lasting
repairs quickly and
simply.Operating the
SKIMENDER RP 360 is easy
- simply insert a repair
stick into the tool, and
pull the trigger! The
flow rate of the molten
repair material,
extruded through its
unique high-temperature
heated nozzle iron, is
controlled by operator
trigger pressure.Another
unique feature of this
tool is its magnetic,
detachable stand which,
along with a screw-down
metal plate (supplied),
allows the operator to
pick up, use, and
replace the pistol with
ease.No other gun-based
system operates close to
the SKIMENDER RP 360
temperature. The high
temperature of the heated
nozzle iron actually
welds the repair material
to the base, making the
ultimate permanent repair
that will outlast all
others.This gun kit comes
complete with a Tec Drip
Mat, 3 black repair rods
and 3 clear repair rods.
A magnetic stand for the
gun is also
included.Contents: Gun,
Gun Stand, 3 x black
repair sticks, 3 x clear
repair sticks, drip mat,
trigger stand, magnetic
standFitted with UK plug
and 6 foot flexHeating Up
Time: 10-15
minutesOperating
Temperature: Approx 440
degrees FDiameter Of
Repair Sticks: 1/2Our
OpinionA great tool for
the more advanced ski and
snowboard tech. Treated
with respect, a repair
gun can give a very long
lasting and professional
repair.Is This For Me?If
you are looking to set up
a comprehensive home DIY
workshop a repair gun is
a great investment and
will save time on base
repairs giving a more
durable fix.
Availability: In Stock
£229.99
Available
-
For a professional repair
a P-Tex gun and repair
rods are the way to
go.These rods are
specifically for P-Tex
guns with a 12 mm
diameter, and are each
200 mm long.Notes:
Contains 3 repair rods in
either clear or black
colourOur OpinionAs used
in our workshop with our
pro P-Tex guns, these do
give a highly
professional and
permanent repair when
used correctly.Is This
For Me?If you have a
modern P-Tex repair
pistol, these 12 mm
diameter repair sticks
will be required.
Availability: In Stock
£1.75
Available
-
The traditional repair
candle which you light
and drip onto the base.
These rods are for
lighting only, always
light with a clean flame
such as a gas lighter for
a cleaner finish.Notes:
Contains 10 repair
candles for lighting
only. BLACK candles.Our
OpinionFor the
traditionalists out there
the repair candle has
been used countless times
to deal with base scrapes
on and off the mountain.
For temporary repairs of
the base to protect the
core from further
damage.Is This For Me?If
you want a traditional
repair stick here it
is!Please Note: Image
shows a 5 pack, this
product is however the 10
pack.
Availability: In Stock
£4.25
Available
-
For a professional repair
a P-Tex gun and repair
rods are the way to go.
These rods are
specifically for P-Tex
guns with a 12 mm
diameter, and are each
200 mm long. Notes:
Contains 10 repair rods
in either clear or black
colour Our Opinion As
used in our workshop with
our pro P-Tex guns,
these do give a highly
professional and
permanent repair when
used correctly. Is This
For Me? If you have a
modern P-Tex repair
pistol, these 12 mm
diameter repair sticks
will be required.
Availability: In Stock
£5.00
Available
-
Work grade steel scraper
with sharpened edges,
for removal of excess
material from bases. Also
useful when undertaking
base repairs with repair
candles or
P-Tex.Material: Work
SteelOur OpinionA part of
the home workshop kit, a
steel scraper helps with
base repairs, removing
excess material and
protecting the base when
you are heating up repair
candles. Be careful of
those sharp edges
though!Is This For Me?A
requirement if you are
planning to make any
repairs to the base of
your skis or snowboard.
Also handy for removing
plastic 'hairs' from the
base prior to waxing.
Availability: In Stock
£4.50
Available
-
For over 80 years,
Holmenkol has been
dedicated to the
production of the finest
ski waxes available.
Today, they lead the
way, with the
introduction of nano
technology, combining
sport with ground
breaking science to
produce a comprehensive
line of waxes and tools,
proven in World Cup use,
and suitable for all
types of winter sports
enthusiasts. Holmenkol
Heat Applied Repair
Strips are ideal for
repairs back at the
workshop at the workshop.
Available in black or
transparent, they are
applied by ironing in
gently with the corner of
an iron or a base repair
tool, ironing into the
are of damage, and
allowed to harden before
finishing. An easier to
apply solution than Ptex
Candles. For repair
strips that you can light
with a lighter, select
the Holmenkol Follit
Repair Strips. Notes: A
SINGLE STRIP supplied
without packaging Our
Opinion Essential for the
home tuning and repair
enthusiast, as they
allow you to make a good
repair quickly and
easily, preventing
further damage to your
bases. Is This For Me?
Ideal for the home
workshop, giving a more
permanent repair.
Availability: In Stock
£1.00
Available
-
For over 80 years,
Holmenkol has been
dedicated to the
production of the finest
ski waxes available.
Today, they lead the
way, with the
introduction of nano
technology, combining
sport with ground
breaking science to
produce a comprehensive
line of waxes and tools,
proven in World Cup use,
and suitable for all
types of winter sports
enthusiasts. Holmenkol
Care Fleece is ideal for
polishing waxes once
applied, without risk of
damage to your board or
skis. Care Fleece is
essential when servicing
skis and boards, it can
be used as part of the
cleaning process and for
polishing. Single sheet.
We also sell packs of 20
sheets.Material: Tear
resistant Fiberlene
sheetSize: Each sheet is
25.5 cm x 20.5 cm (8 x 10
inches)Our OpinionGreat
for use in the workshop,
not only for
waxing/polishing, but
also for detecting nicks
in edges without chopping
your fingers up! The Care
Fleece is tear
resistant.Is This For
Me?If you are servicing
your own kit, and want a
highly polished finish,
then the Holmenkol Care
Fleece is a useful
addition to your tool
box, and is long
lasting.
Availability: In Stock
£0.75
Available
-
Holmenkol Heat Applied
Repair Strips are ideal
for repairs back at the
workshop at the workshop.
Available in black or
transparent, they are
applied by ironing in
gently with the corner of
an iron or a base repair
tool, ironing into the
are of damage, and
allowed to harden before
finishing. An easier to
apply solution than Ptex
Candles. For repair
strips that you can light
with a lighter, select
the Holmenkol Follit
Repair Strips.Notes:
Contains five repair
stripsOur
OpinionEssential for
anyone with an FX
Smartbase equipped
snowboard or skis, so
you know that the correct
material has been used
for repair.Is It For
Me?Ideal for the home
workshop, or out in
resort.
Availability: In Stock
£5.00
Denmark