The scheppach ha 2000 is suitable for somone who is used to working cleanly & precisely & who expects this also from the machines & tools in their workshop. The ha 2000 from scheppach not only extracts with the utmost efficiency* but it also filters dust particles to a volume of 800 m 3 per hour. A most efficient propeller system blows shavings & dust through the separation system where the course particles are directed to a plastic collection bag. newly cleaned air is then returned to the workshop area through the filter system. this recycling also means great savings in heating costs. More filters, more performance, more clean air. it is possible to increase the extraction performance of the ha 2000 even further by installing the special filter cartridge. this easy to clean unit retains even the smallest dust particles & improves air circulation as a result of its large filter surface. It is possible to increase the extraction performance of the ha 2000 even further by installing the special filter cartridge. This easy to clean unit retains even the smallest dust particles & improves air circulation as a result of its large filter surface *like the ha 3200 & ha 2600 the ha 2000 is not licensed for use in a professional workshop (only authorised for use by home workers).. Safe & sturdy wheel base, filter bag, bia tested, waste bag, hose, connection piece, earthing set. dimensions: (l / w / h ) 650 x 500 x 1640mm. Air capacity 800 m 3/h, 1/sec. Under pressure 1 mbar filter surface 80 m 2. Filling capacity. 2, 000 litres. ...

Scheppach ha 2600 chip & dust collector. choosing the right extractor is not as simple as it may seem. in fact some machines could be more accurately described as dust “distributors”. the ha 2600 from scheppach not only extracts with the utmost efficiency* but it also filters dust particles to a volume of 1000 m 3 per hour. A most efficient propeller system blows shavings & dust through the separation system where the course particles are directed to a plastic collection bag. Newly cleaned air is then returned to the workshop area through the filter system. This recycling also means great savings in heating costs. more filters, more performance, more clean air. It is possible to increase the extraction performance of the ha 2600 even further by installing the special filter cartridge. This easy to clean unit retains even the smallest dust particles & improves air circulation as a result of its large filter surface. *like the ha 3200, the ha 2600 is not licensed for use in a professional workshop (only authorised for use by home workers).. Safe & sturdy wheel base, filter bag 13, bia tested, waste bag, hose, connection piece, earthing set under pressure 1 mbar. Filter surface 80 m 2. Filling capacity 2, 500 litres. Hose ø 100mm. Motor:230 v /50 hz. Input:0.6kw (0.8hp) output:0.37kw (0.5hp). ...

This scheppach dust ectractor is a solid built machine & is designed for sustained usage. Anyone who is working with wood & wood machinery needs to have a dust extractor simple as that. Not only is the lack of a dust extractor potentially damaging to your health but also without such a machine will only leave more of a mess with dust & shavings everywhere. This HA2600 which is also available with the optional fine dust filter cartridge is the answer. ...

Standards, directives & trends in modern fine & filter techniques were the basis for the design of the ha 3210. Designed for multiple & large machine workshops. This powerful extractor unit filters 2000m 3 of dust free & parifeed air back to the workshop. Fitted with a large 140mm dia hose for larger machines, it can be easily adapted to take 2 x 100mm hose sections with an affordable v twin nozzle adaptor. A fine filter cartridge with a filter surface of 9.5m 2 is also available as an accessory to furthur increase filter capacity.. ...

This is the Scheppach HA3210 dust extractor. This was designed to work along big powerful machines in your workshop at home. 2, 000 m of air is cleaned & returned to the workshop making the enviroment more healthy to work in as well as keeping the place neat. ...

The hf 3000 ci spindle moulder offers an optimum moulding result without the need of subsequent finishing work. Both the spindle & the fences are fully adjustable & have precise micro-adjustable settings. The correct speed & an accurately set tool are a prerequisite for an optimum moulding result without the necessity of subsequent finishing work. The scheppach hf 3000 gives you the choice of 3 speeds the chosen rate is indicated on an electric display if necessary you can fit the optional sliding table carriage with clamping device for all cross grain operations standard equipment. Level table plate of nickel plated steel, height adjustable moulding moulding spindle with clockwise & anti-clockwise rotation, moulding fence with individually adjustable fence rails, roller guard, exchangeable table insert ring, electrical rpm indicator, suction connector. 2.8kw motor. (3.8hp). Dimensions: 640l x 660w x 1050mm.htable

Size: 640mm x 480mm. Table

Height: 880mm. Spindle dia. 30mm. Spindle speed: 3, 000/6, 000/9, 000rpm. Suction connector dia: 100mm. Motor output: 1.8kw (2.5hp). Speed: 2, 800rpm. Switch/plug unit with no-volt release: yes..



...

The new hf 3000 ci spindle moulder offers an optimum moulding result without the need of subsequent finishing work. Both the spindle & the fences are fully adjustable & have precise microadjustable settings. The correct speed & an accurately set tool are a prerequisite for an optimum moulding result without the necessity of subsequent finishing work. The scheppach hf 3000 gives you the choice of 3 speeds the chosen rate is indicated on an electric display if necessary you can fit the optional sliding table carriage with clamping device for all cross grain operations standard equipment. Level table plate of nickel plated steel, height adjustable moulding moulding spindle with clockwise & anti-clockwise rotation, moulding fence with individually adjustable fence rails, roller guard, exchangeable table insert ring, electrical rpm indicator, suction connector. 2.8kw motor. (3.8hp). Dimensions: 640l x 660w x 1050mm.htable

Size: 640mm x 480mm. Table

Height: 880mm. Spindle dia. 30mm. Spindle speed: 3, 000/6, 000/9, 000rpm. Suction connector dia: 100mm. Motor output: 1.8kw (2.5hp). Speed: 2, 800rpm. Switch/plug unit with no-volt release: yes. Sliding table carriage run on ball bearings, 480 x 500 mm in anodised aluminium, guide rail with double rod guidance, swivelling fence 2 x 45°, exchangeable fence rails 850–1, 500 mm, clamping attachment with locking fence & fine adjustment..



...

The HF3000ci moulder has 3 speeds. The speed is shown on an electric RPM display. The standard moulding fence, adjustable on both sides, can be set to an impressive tenth of a millimetre. To achieve such a precise setting this is performed by the hand wheel which you will see in the image. ...

Scheppach hms 2600 ci 10" x 8" planer/thicknesser. Whether stationary or mobile: the scheppach hms 2600ci is the most efficient & cost effective planer & thicknesser available for the professional user; serious home woodwork-ers & educational workshops. heavy duty machined cast iron tables which are easily & accurately adjustable. Unique vulcanized rubber feed system on the thicknessing mode.250mm x 210mm thicknessing capacity. 3mm stock removal. Powerful 3/4 hp motor for constant feed in both hard & soft timbers. Large professional planing fence. Cast iron thicknesing table adjustable to 1/10mm for super fine finishing. 135kg making the machine very stable & free from vibration. Dimensions: l 1160mm x w 700mm x h 970mm. Surfacing table

Size: 1040mm x 310mm. Table

Height: 820mm with base unit. thicknessing table

Size: 430mm x 250mm. drive speed plane shaft. 6, 500rpm. Feed speed: 5m/min. suction connector: 100mm. weight: 135kgs. surface planing: plane width 260mm. max stock removal: 3mm. thicknessing: clearance height/
Width: 210mm/250mm. max stock removal: 5mm.






...