Scheppach basato 3 bandsaw plus stand & wheels. For perfect adaptation to individual types of material, the basato 3 offers you as special feature continuous speed control within a range from 370 to 750 m/min ensuring, at the same time, utmost accuracy by means of top & bottom 3-roller precision guides. For smooth running, the balanced & polished band wheels are fitted with a rubber facing. The tilting table copes with every task. The large cast iron table offers a safe workpiece support. The tilting table has a precise one hand setting control ranging from –17° to +45°, while the throat width is 305 mm. The precision fence system is equipped with a magnifying glass. For your safety, the casing is protected by a door with a cut off switch. Stand equipments
Includes:: swivelling, large cast iron table top, ripping fence with magnifying glass, continuous adjustable speed control, tempered 3-roller precision saw bladeguide top & bottom, band wheels with rubber facing, balanced & polished, suction connector. Dimensions: l 860 x w 600 x h 1680mm. Table

Size: 548mm x 400mm. Table height 520mm. Table tilt adjustment: –17° to +45°. Blade wheel dia: 315mm. Sawblade length: 2360mm. Sawblade width (min-max). 3.5mm to 15mm. Cutting speed: 370/750rpm. Clearance

Height: 160mm. Clearance

Width: 306mm. Suction connector dia: 100mm. Weight approx: 69kgs..






...

Scheppach basato 18" bandsaw 5-2. realise your imaginative ideas with a scheppach basato 52 bandsaw. So what makes scheppach stand out from the rest? firstly, it is equipped with a solid cast iron table & a deep rip fence which locks positively by means of an eccentric clamp. With up to 300 mm depth of cut; 440 mm throat capacity; two speeds & a table tilt range from minus 20 to plus 47 degrees, all you need in addition is a little imagination. Standard equipment

Includes:: stable, torsion resistant steel construction, swivelling cast iron table, ripping fence with magnifying glass, 3-roller sawblade guide top & bottom, band wheels with rubber facing, 2 speeds, suction connector, push stick, assembly tool.

Dimensions (l / w / h). 1230mm x 800mm x 1870mm. Table

Size: 640mm x 640mm. Table

Height: 900mm. Table tilt adjustment: -20° to +47°. Blade wheel dia: 450mm. Sawblade length: 3430mm. Sawblade width (min-max): 6-25mm. Cutting speed: 460/1200m/min. Clearance

Height: 300mm. Clearance

Width: 440mm. Suction connector: 100mm. Input: 2.2kw (3.1hp). Output: 1.5kw (2hp) speed: 1400rpm. Motor protection: yes. brake: no. Switch/plug unit with no-volt release: yes.











...

This bandsaw is the ultimate professional bandsaw. This saw is perfect for the professional but also very suitable for educational workshops. This saw is equipped with a solid cast iron table & a deep rip fence which locks positively by means of a clamp. With up to 300 mm depth of cut a 440mm throat capacity along with 2 speeds & a table tilt range from minus 20 to plus 47 degrees you have a serious asset in your workshop which will last for many years. ...

Scheppach bg 150 6" bench grinder 240v. powerful motors quickly bring the rough & smooth grinding stones to their required operating speed. with the bg 150 you have the option of up to 370 watt motor power & its large diameter grinding wheels allows for quick results even with larger tools. it comes equipped with a safety lamp. Standard equipment rough & smooth discs, work light (bulb not supplied), adjustable tool plate, assembly tool, water tank. technical data:

Dimensions (l / w / h ): 385 x 240 x 280mm. disc

Size: 150mm. disc bore: 12.7mm. weight approx: 11.5kgs.



...

With the scheppach bg 200 you have the option of up to 550 watt motor power & its large diameter grinding wheels allows for quick results even with larger tools. it comes equipped with a safety lamp. technical data:

Dimensions (l / w / h ): 440 x 280 x 340mm. disc

Size: 200mm. disc bore: 16mm. weight approx: 25kgs.



...

This is the Scheppach Lonos garden shredder which is an invaluable piece of machinery to have around. By investing in a brand like Scheppach you are investing in a serious German brand that has been around a long time. This shredder is ideal for those who live in a built up area because this shredder is very quiet & will comply to noise regulationis your area. The way this shredder has been designed means that it is easily stored away without needing much space. ...

Even if you own a small garden, having a scheppach chipper/shredder you are profiting from years of technological research that has gone into scheppach garden shreders. The biostar 2000 has been designed & tested rigorously. Powerful intake through our patented in-feed system. Durable blade in hardened tool steel. Re-sharpenable. Sturdy metal housing with carriage wheels & integrated handle. Cutting capacity up to 40mm branches.. ...

Sanding deep & wide work pieces, front edges, narrow inner curves, horizontal, vertical, diagonal, with or across the grain; it’s all part of a day’s work with the scheppach bsm 2010 belt sanding machine & the job is completed in no time to your total satisfaction. In vertical sanding mode the 198 mm wide anodised aluminium tables offer more than adequate support & the smoothest surface to work off. The continuous table height adjustment enables you to use the full width of the belt equally which becomes cost effective & economical in use the most generous sanding surface allows the safe & proficient sanding of larger work pieces & the belt speed of 11 m/sec eliminates the possibility of overheating & discoloration of the wood. Efficient corner sanding. Both tables are adjustable from 0 to 45 degrees using small rotating rollers allowing perfect diagonal sanding even on tight inner curves. The standard safety fence means that you can work with small work pieces safely. A handle provides quick & easy adjustment of the bsm 2010 to either horizontal or vertical sanding modes. An optional sturdy floor stand makes it possible to convert the machine from a bench top unit to a floor standing machine. Due to the connecting piece for a scheppach extractor unit, the bsm 2010 got the test certificate "wood dust tested". Standard equipment: folding sanding plate with workpiece fence, height adjustor, swivel length table, swivel cross table, 3 sanding belts, suction connector, assembly tool.. ...

The perfect finishing touch with the bsm 2010 belt sander. Sanding deep & wide work pieces, front edges, narrow inner curves, horizontal, vertical, diagonal, with or across the grain; it’s all part of a day’s work with the scheppach bsm 2010 belt sanding machine & the job is completed in no time to your total satisfaction. In vertical sanding mode the 198 mm wide anodised aluminium tables offer more than adequate support & the smoothest surface to work off. The continuous table height adjustment enables you to use the full width of the belt equally which becomes cost effective & economical in use. The most generous sanding surface allows the safe & proficient sanding of larger work pieces & the belt speed of 11 m/sec eliminates the possibility of overheating & discoloration of the wood. Efficient corner sanding. Both tables are adjustable from 0 to 45 degrees using small rotating rollers allowing perfect diagonal sanding even on tight inner curves. The standard safety fence means that you can work with small work pieces safely. A handle provides quick & easy adjustment of the bsm 2010 to either horizontal or vertical sanding modes. The sturdy floor stand makes it possible to convert the machine from a bench top unit to a floor standing machine. The continuous table height adjustment allows evenly sanded surfaces & corners. Standard equipment
Includes:: folding sanding plate with workpiece fence, height adjustor, swivel length table, swivel cross table, 3 sanding belts, suction connector, assembly tool. dimensions: l 1250 x w 520 x h 420mm. Grinding plate: 800mm. Length table

Size: 770mm x 200mm. Cross table

Size: 480mm x 200mm. Sanding beltlength/
Width: 2000/150mm. Belt speed: 11m/sec. Motor input: 2.7 kw (3.7 hp). Output: 2.0 kw (2.7 hp). Speed: 2.0 kw (2.7 hp).





...

Scheppach bts 900 belt & disc sander. economic belt & disc sanding – the bts 900 bench top sander belt & disc sanding are combined with the bts 900 sander. This is the major benefit with the bts 900. Belt & disc sanding in one compact unit that can be easily stored when not in use. The belt sanding option can be adjusted vertically through 90 degrees & the sanding table can be mounted for both belt & disc sanding operations. The sanding belt can be continuously adjusted from horizontal to vertical. The cast-iron base keeps the sander stable during use, so you can apply the desired amounts of pressure & achieve consistent results. the tilting table can be positioned for both belt & disc sanding operations. Both belt & disc sanding are provided with the bts 900x. the belt sander unit can be adjusted by 90° from vertical to horizontal position. the sanding table, swinging through 45°, can variably be used for belt & disc sanding. at the cross stop, any angle can be exactly set. technical data:

Dimensions (l / w / h ): 530 x 410 x 290mm. grinding plate: 290mm. table

Size: 159mm x 225mm. table adjustment: 45°. sanding belt length/
Width: 915mm/100mm. sanding belt grit

Size: 80. belt speed: 7.5rpm. sanding disc speed: 2350rpm. suction connector ø: 32mm. weight approx: 25kgs. image 2: the sanding belt can be continuously adjusted from horizontal to vertical. image 3: the tilting table can be positioned for both belt & disc sanding operations. image 4: the sanding discs are easily attached with the velcro fastening system.






...