Website: http://conrad.com/ Conrad have been at the cutting edge of technology around the world for over 85 years. From Berlin in 1923 Conrad has expanded through the years and is now a global player in technology and consumer electronics.
Sinter-Heatpipes are the heatpipes which are attributable to a special capillary system, that can also be relocated/switched against the gravitation heat. Di.e.that the heat source can be above and the heat sink can be below. This is extremely unordered to the point of being unfeasible with the conventional heatpipes.
Up to 85% time savings with the simple and extremely fast assembly, because of no lock nut and no thread. Close together, can also be mounted in inaccessible places Assembly and disassembly always from the front. No loosening from vibration possible, as firmly stuck and not screwed.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs.
Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
AMP Universal-Mate-N-Lok plug connector are available with 2, 3, 4, 5, 6, 8 and 9 pins. They are suitable for both free-hanging or fastened connections, such as for connections to PCBs. These plug connections comply with test guideline VDE0110, 380 V. Nr. E28476. Connector housing for use with crimp contacts.
Contact-proof measurement lead as per IEC 61010 in CAT III 1000V with add-on plug options Highly flexible, double insulated and cruswh-resistant PVC-stranded wire. Embedded indicator colour shows insulation damage clearly. Design 2 mm plug on 2 mm plug
With this water cooler from EK Water Blocks you simply cool your GTX285. Whether for the next round, or the planned Overclocking Silent PC, the EK-FC285 GTX graphics card still holds up to temperature. Broad milled water channels are perfect for your high-flow water cooling system and does not slow down other components. In addition, the cooler is single slot, thanks to slim design perfect for the SLi-Mode.
Powerful touch screen monitor for demanding working environments such as cash or Info-Terminals as well as customer and kiosk systems. The widescreen format takes advantage both, the presentation in many applications, and optimum utilization of available space. With the 5-wire resistive touch technology, a precise input is possible at any time. Heavy stand for stability and ease of use. Thanks to the Touch signal transmission via RS-232 or USB you can react optimally to different requirements.
Regarded by all sides, the LM100 is a true eye candy, small and compact, with an aluminium finish. It fits wonderfully to the arrangement and is the start to your Entertainment system. Based on the slim design, it fits wonderfully into each living room and impresses through its functions. LM100 Mini supports Mini-ITX Mainboards. Although the size of the LM100 is very small, it has to grow up the possibility to a complete system. Together with Intel atom and a HDMI mainboard, here a multimedia system together grows.
The new innovative power supply from Egston. These devices deliver a regulated output voltage at up to 6 W and are suitable for mounting in DIN flush-mounted sockets, on furniture or are suitable for fixing to flat surfaces. As they are only 19 mm high (12 W device version) enough space is left for mounting the consumer into the flush-mounted socket. They are connected using flexible wire that can be tailored to suit your requirements. These devices still feature all the advantages of an external power supply, such as the tested and approved module that can be purchased as an additional item, the thermal separation of consumers, and the highly simple mounting etc. Tested according to EN 60950, EN 61000-3-2, EN 61000-3-3, EN 50082-1, UL 60950.
The new innovative power supply from Egston. These devices deliver a regulated output voltage at up to 6 W and are suitable for mounting in DIN flush-mounted sockets, on furniture or are suitable for fixing to flat surfaces. As they are only 19 mm high (12 W device version) enough space is left for mounting the consumer into the flush-mounted socket. They are connected using flexible wire that can be tailored to suit your requirements. These devices still feature all the advantages of an external power supply, such as the tested and approved module that can be purchased as an additional item, the thermal separation of consumers, and the highly simple mounting etc. Tested according to EN 60950, EN 61000-3-2, EN 61000-3-3, EN 50082-1, UL 60950.
Night-Flight-digital instruments from raid hp to have added an integrated volt display (2 for 1). After turning the ignition, the vehicle voltage is displayed for about 50 seconds, then the digital instrument automatically displays the value of each raid hp digital instrument. For all 10 minutes the on-board voltage is displayed on the digital display for about 50 seconds, and then it switches back to the respective Instrument-Mode. In volt mode, the value of the instrument used on the LED bar is displayed. If the critical range is for longer than 3 seconds above or below, the digital display warns with a blink of the displayed value. For critical Critical Ranges, please refer to the product details. If the vehicle voltage falls off for any reason, to 11 volts, then the display flashes and jumps automatically to the V-mode and displays the current voltage. Through an electronic provider a very accurate indicator is achieved (does not work mechanically) as conventional instruments. The glass / display of the instruments is black and are visible only after the ignition switching on the display!