For extensive measurements on coils, capacitors and resistors. The selectable measurement frequency (120 Hz / 1 kHz), the high basic accuracy of 0.5%, the multifunctional display and the option of tolerance selection in 1% - 5% - and 10% components make BK-878B an absolute professional device.
Fully featured LCR meter with 3 ½ digit digital display and a basic accuracy of 0.5%. The measuring rate is 2 samples per second. The oscillator frequencies are automatically switched while selecting range and thus the equipment always operates with practice-oriented measurement frequencies. This LC Meter is particularly suitable in laboratory and service operation as well as in training sectors.
For extensive measurements on coils, capacitors and resistors. The selectable measurement frequency (100/120 Hz / 0 kHz), the high basic accuracy of 0.5%, the multifunctional display and the option of tolerance selection in 1% - 5% - and 20% components make BK-879B an absolute professional device.
The R-200 enables milli-ohm resistance measurements from 0.1 m&Omega to 40 &Omega with high resolution and accuracy to transformers, circuits, ring-bus systems, components, etc. Through the sprayed on soft-rubber protection the R-200 is also suitable for harsh use.
Highly accurate measuring bridge for measuring inductances, capacitances and resistance with a sensational measuring frequency for a handheld meter of up to 100 kHz. The components can be measured in series or in parallel. In order to adapt optimally to the measurement of the component, the measurement frequency can be chosen freely in all areas. For the data transfer to the PC an RS-232 infrared interface is available.
For extensive measurements on coils, capacitors and resistors. The switchable measurement frequency (120 Hz / 1 kHz), high accuracy of 0.5%, multi-functional display and integrated RS-232 interface make the 4080 a high-end LCR instrument at an affordable price.
With the Agilent Technologies U1733C Handheld LCR Meter you can now measure at frequencies as high as 100 kHz, a capability that is typically found only in benchtop meters. With the auto identification, Ai which conveniently displays component type and detailed component analysis such as Z, ESR, DCR, you can get measurements done faster. Better yet, the battery lasts up to 16 hours, ideal for testing on the go. With the U1730 Series, you can perform quick, basic LCR measurements at your convenience, without burning a hole in your pocket.
The SMD-200 is the ideal solution for Measurement of SMD components. Forceps adapter allows the simultaneous measurement of adherence and small SMD capacitors, resistors and diodes. with continuity tester. The gauge is located perfectly in the hand and always allows a view of the DISPLAY.