Voltage data logger with internal lithium battery for recording 32510 measured values. The saved measurement values can be read out via USB port and graphically displayed with the accompanying software, or exported to other software applications for further processing.
With the logging system you can record measured values from up to 50 temperature and air-humidity sensors. The sensors are connected wireless with the base receiver at the USB port of your PC and can be distributed almost everywhere in the house. The radio range is max. 100 m in open space. The base station stores the received data in the internal memory even with the PC switched off. The voltage supply is done via USB or independently via an optional mains unit (batteries and mains unit not included in delivery).
Compact data logger with built-in lithium battery for recording 16382 temperature values. The saved measurement values can be read out via a USB port and graphically displayed using the accompanying software, or exported to other software applications for further processing. The data logger is waterproof (IP67) and therefore optimally protected against moisture, etc.
Compact data logger with in-built lithium battery for recording 32, 000 temperature measurement values. The saved measurement values can be read out via a USB port and graphically displayed using the accompanying software, or exported to other software applications for further processing.
Lufft offers a variety of models with internal or external sensors for recording humidity, temperature, pressure and CO2. For climate monitoring and recording in buildings, air conditioning units, laboratory, cleanroom, storerooms and museums, alarm indication (current or historical since the last data transmission), conversion of the display from %RH to absolute humidity or dewpoint with SmartGraph professional software.
Temperature range -25.0 to +60 ° C &bull Accuracy 0.5 ° C &bull Resolution 0.1 ° C &bull 16 000 readings & - min recording period 1666 days (at 15th recording rate) & - recording time 2 s to 5 h & - adjustable sensor PT-1000 & - battery life 6 years at 15 min. Capture rate & - dim. Casing (of BAS) 48.5 x 48.5 x 35.5 (L x B x H) without plug & - Splash-water protected (IP65).
Long-time data logger, battery-operated, for climate monitoring in laboratories, measurement rooms, EDP-systems, switching systems, storerooms, museums, etc. Large data storage with 120, 000 measurement values (memory contents remain intact even after battery change). Alarm indicator (current or past) in the display for both measurements. Replaceable sensor module. Analysis software SmartGraph2 with automatic measurement device management included with delivery (management of up to 255 measuring devices).
Long-time data logger, battery-operated, for climate monitoring in laboratories, measurement rooms, EDP-systems, switching systems, storerooms, museums, etc. Large data storage with 120, 000 measurement values (memory contents remain intact even after battery change). Alarm indicator (current or past) in the display for both measurements. Replaceable sensor module. Analysis software SmartGraph2 with automatic measurement device management included with delivery (management of up to 255 measuring devices).
Loop current data logger with internal lithium battery for recording 32510 measured values. The saved measurement values can be read out via a USB port and graphically displayed using the accompanying software, or exported to other software applications for further processing.
Low cost data logger with internal lithium battery for recording 4080 temperature values. The saved measurement values can be read out via USB port and graphically displayed with the accompanying software, or exported to other software applications for further processing.
The data logger testo 177-T4 helps in a simultaneous temperature recording at different places. Ideal for extreme temperatures. There are 4 external connections available for T/K/J-type sensors. Temperature fluctuations e.g. in production processes, in the laboratory, etc. often influence the end result. An adaptation to the respective measurement task is possible through surface, immersion and air sensor.
Long-term data logger, battery operated, for climate monitoring in laboratories, measurement rooms, IT facilities, switching rooms, warehouses, museums, etc. Large data storage capacity with 120, 000 measured values (memory contents remain even after battery replacement). Alarm indicator (current or past) in the display for both measurements. Replaceable sensor module. Analysis software SmartGraph2 with automatic measurement device management included with delivery (management of up to 255 measuring devices).
Long-term data logger, battery operated, for climate monitoring in laboratories, measurement rooms, IT facilities, switching rooms, warehouses, museums, etc. Large data storage capacity with 120, 000 measured values (memory contents remain even after battery replacement). Alarm indicator (current or past) in the display for both measurements. Replaceable sensor module. Analysis software SmartGraph2 with automatic measurement device management included with delivery (management of up to 255 measuring devices).
testo Saveris&trade - secure monitoring of all critical measurement places. The base stations form the centre of a sophisticated and secure room-climate monitoring system with automatic recording of the measurement data. One can select from various bi-directional radio sensors for temperature and/or air humidity with internal and external sensors. In case wide stretches e.g. in large storehouses or over several storeys have to be bridged, then the Saveris Router increases the range. The Saveris Converter makes it possible to use the already available LAN-infrastructure. A direct coupling of the radio sensors to an existing Ethernet is done thereby very easily. In case of exceeding the limiting values there is an immediate alarm to the base stations with feedback function. The measurement system can be used flexibly e.g. for monitoring and analysing the building climate food factories or in supermarkets or for production and quality assurance in the food industry, chemist shops, hospitals or research and development.
The Testo 175 T3 data logger offers parallel monitoring and recording of two temperature measuring points. The data logger also has a mini USB port and an SD card slot, which makes reading off data quick and easy. Further advantages are the larger storage capacity and power supply via standard batteries. Simple testing and documentation, for example, of the front and back temperatures of a heating system.
To extend the starter set. High data security - also in the case of empty battery no overrun is possible & - Large display in the small housing for display of current measured value, the max/min of values, the programmed limit values or the battery service life in days & - Fast selection of the data in only 10 s & - Ideal for mass employment & - Enclosure IP65.
An incorrect or not adapted ventilation behaviour can lead to the formation of moulds and micro-organisms. The Econom climat measures the temperature and air humidity in the room every three minutes. These measured values are shown on the display alternately. The data is balanced with the pre-specified, unchangeable threshold values and the user is informed about exceeding or falling short in the display with the help of symbols and warning displays. At the same time the measured data of exceeding or falling short is stored in the memory with timestamp. The base plate of the device is fixed on to the wall and covered and sealed with a plastic shell so that it cannot be manipulated. Opening the casing destroys the seal.
The BS-1000 LAN receiver enables a display of the sensor data of the AREXX multi-log system on all computers connected in the network. The standard multi-log software permits you to process the sensor data in exactly the same way as in the case of the BS-500 receiver (as USB-receiver or as independent receiving station with a buffer storage).
Long-time data logger, battery-operated, for climate monitoring in laboratories, measurement rooms, EDP-systems, switching systems, storerooms, museums, etc. Large data storage with 120, 000 measurement values (memory contents remain intact even after battery change). Alarm indicator (current or past) in the display for both measurements. Replaceable sensor module. Analysis software SmartGraph2 with automatic measurement device management included with delivery (management of up to 255 measuring devices).
Additional USB-base receiver for the temperature logging system TL-500 for recording and storing the sensor data on other PCs. A separate base receiver is necessary for each additional PC. The BS-500 stores the received data of the radio sensors in the internal Flash-memory. These remain intact even without the PC. For the autonomous working, however, an optional mains unit is necessary (not included in delivery).
Carbon monoxide data logger with internal lithium battery for recording 32510 CO measured values. The saved measurement values can be read out via a USB port and graphically displayed using the accompanying software, or exported to other software applications for further processing.
Compact data logger with a lithium battery for the recording of 32, 000 temperature readings. The stored data can be read via the USB interface and software supplied with the graphic analysis, or for further processing with other programs to be exported.
testo Saveris&trade - secure monitoring of all critical measurement places. The base stations form the centre of a sophisticated and secure room-climate monitoring system with automatic recording of the measurement data. One can select from various bi-directional radio sensors for temperature and/or air humidity with internal and external sensors. In case wide stretches e.g. in large storehouses or over several storeys have to be bridged, then the Saveris Router increases the range. The Saveris Converter makes it possible to use the already available LAN-infrastructure. A direct coupling of the radio sensors to an existing Ethernet is done thereby very easily. In case of exceeding the limiting values there is an immediate alarm to the base stations with feedback function. The measurement system can be used flexibly e.g. for monitoring and analysing the building climate food factories or in supermarkets or for production and quality assurance in the food industry, chemist shops, hospitals or research and development.
Long-time data logger, battery-operated, for climate monitoring in laboratories, measurement rooms, EDP-systems, switching systems, storerooms, museums, etc. Large data storage with 120, 000 measurement values (memory contents remain intact even after battery change). Alarm indicator (current or past) in the display for both measurements. Replaceable sensor module. Analysis software SmartGraph2 with automatic measurement device management included with delivery (management of up to 255 measuring devices).
Long-time data logger, battery-operated, for climate monitoring for e.g in laboratories, measurement rooms, Computer equipment, , switching systems, storerooms, museums, etc. Large data storage with 120, 000 measurement values (memory contents remain intact even after battery change). Alarm indicator (current or past) in the display for both measurements. Replaceable sensor module. Analysis software SmartGraph2 with automatic measurement device management included with delivery (management of up to 255 measuring devices).
Long-time data logger, battery-operated, for climate monitoring in laboratories, measurement rooms, EDP-systems, switching systems, storerooms, museums, etc. Large data storage with 120, 000 measurement values (memory contents remain intact even after battery change). Alarm indicator (current or past) in the display for both measurements. Replaceable sensor module. Analysis software SmartGraph2 with automatic measurement device management included with delivery (management of up to 255 measuring devices).
Data logger series with excellent price/performance ratio. The devices of the EBI-series are waterproof (IP67) and can store up to 288 measurement values (EBI 25-TH 20000) and can also be read at all times in the display. Devices for measuring the ambient temperature, air humidity and air pressure are available.
Compact data logger with in-built lithium battery for recording 16, 000 temperature and 16, 000 humidity measurement values. The saved measurement values can be read out via a USB port and graphically displayed using the accompanying software, or exported to other software applications for further processing. Additional calculation of dew point and evaporation temperature (wet bulb).
Compact temperature/humidity logger with built-in lithium battery for recording 16382 values of each temperature and humidity. The saved measurement values can be read out via USB port and graphically displayed with the accompanying software, or exported to other software applications for further processing. The dew point is displayed in the software.
With the data logger testo 177-H1 a reliable recording and documentation of the measured values is possible over the years. Optimum for the monitoring of rooms for sensitive products e.g. in production and intermediate storage. Another NTC-temperature sensor can be connected.