With the additional info. module you are informed about every place in house, in different areas and floors or in a side entrance and status information of the Secvest® 2WAY. LEDs indicate you all the current states of the system Not only the activation status is shown, but also faults and other operating conditions. The info module also informs you with signal tones about events such as errors, activation or output and input delays. If an alarm is issued, the internal piezo signal transmitter provides a penetrating alarm tone at 110 dB. Display: among other things voltage & - Radio signal active & - Subarea active & - Open zones & - Output/input delay active. Alarm-tone: Disturbance & - Activation not successful & - Output delay active & - Input delay active
The radio window protection AGV 96E offers protection against unauthorized penetration into your areas owing to two steel bolts. The AGV 96 is installed on the grasp side of the window or the casement door. If somebody tries to come to the building, the AGV 96 announces the burglary attempt, before the intruder has opened the window or the door to the head office which hits then immediately alarm.
The radio window protection AGV 96E offers protection against unauthorized penetration into your areas owing to two steel bolts. The FTS 96 is installed on the grasp side of the window or the casement door. If somebody tries to come to the building, the AGV 96 announces the burglary attempt, before the intruder has opened the window or the door to the head office which hits then immediately alarm.
The radio-water detector reacts to liquids and water and report these events to the radio alarm center. Sun damage caused by broken pipes or ruptured water hoses from washing machines or dishwashers can be detected quickly and reduced by prompt intervention.The radio-water detector consists of a transmitter and the sensor. The radio-water detector consists of a transmitter and the sensor.
The indoor siren is an optional accessory of Secvest ® 2WAY headquarters. As a purely acoustic signal gives support in the event of an alarm, with a tone of 90 dB, the outdoor siren and the Secvest ® 2WAY headquarters. Central siren and communicate with each other on the 868 MHz frequency, which is reserved specifically for the security field.
As per series the Secvest® 2WAY is integrated with an analog telephone device. In case you are connected via ISDN-telephone lines, you can always set this performance based ISDN-Interface. It sends alarm and language news at different adjustable call numbers and coordinating protocol. The interface is simply inserted into the central SECVEST® unit, order no. 75 16 54-62.
With the electronic retrofit set make your mechanical protection a active protection for existing FTS 96. No boring or sticking inevitably. Simply exchange the old plastic cover with the new electronic cover and the window is electronically protected and transfers an alarm with unauthorized opening attempt.
The flexibility of the wireless universal module is almost unbeatable. As the name already states, it can be used universally, and combines four different functions in a single device. You decide to install, what function you need: Module as a repeater module, relay module, transmitter module or arming &bull When used as a repeater module, the universal module extends the range of up to 8 wireless detectors by double the amount. used as relay module, you can control up to 4 relays per module So you can switch different consumers (e.g.as light). &bull Use the activation module to activate and deactivate your SECVEST 868 with wired key switches. Naturally with activated/deactivated display. As a technique you can use any channel alarm sensors (egB. Wassermelder, Gasmelder etc.) in das Secvest-Funkalarmsystem integrieren. Here, an alarm input, a sabotage connection and a 12V connection are provided for consumers.
The additional Radio-in addition to the Central control unit allows you to own a comfortable convenient Arm-/Disarm switch using PIN-Code. With anti-sabotage protection and LED display. Using LED Display will show the Central status. IP54 protected. Equipped with Proximity-Function for operation by means of Chip key.
With the attack button you work reliably in an attack alarm if you need help. The attack button, you can use as a stand-alone device or integrated into the burglar alarm system. The key is sabotage. For the assault and the tamper alarm is available one NO or NC contact available. The attack button is certified VS
With a monitoring range of 90° and a detection range of up to 15 m, this compact radio movement detector can seamlessly monitor an entire room. In addition, this detector recognises the difference between people and animals. While alarm does not get triggered due to dogs of about 30 kg, the people walking upright are surely detected.
The radio opening detector is installed on windows or doors. Even if these are only opened by a few millimetres, the detector triggers and alarm. The SECVEST® centre can be programmed in such a way that the alarm units are active, even if you are in the apartment. As well as the integrated reed contact, additional, wired NC contacts can also be connected. The reed contact and externally connected contacts are separately evaluated at the central unit.
The radio opening detector is installed on windows or doors. Even if these are only opened by a few millimetres, the detector triggers and alarm. The switch of the Secvest® 2WAY can be programmed in such a way, that even if you are at home, the warning device can be activated As well as the integrated reed contact, additional, wired NC contacts can also be connected. The reed contact and externally connected contacts are separately evaluated at the central unit.
With your electronic upgrade kit you can activate mechanic protection for existing FTS 96. Drill or adhesive is not required. The old plastic cover can be simply exchanged with new electronic cover and the window is already electronically protected and transmits alarm at unauthorised access.
Assembled in sheltered outdoor area, it has a wireless key switch for easy enabling and disabling wireless alarm system ABUS Secvest ® 2WAY by key. One rotation of a key is enough for the key switch to send appropriate message to the alarm system. The controlled key switch has two LED indicators. As a special protection of these keys, wireless switch next to the wall demolition cover contact is also equipped with a core protection rosette. Protection class IP55
You can also supplement the SECVEST® 868 with a wireless outdoor siren which is equipped with a 105 dB alarm. This wireless outdoor siren has bidirectional duplex antenna technology. Thus the siren messages are forwarded to the Secvest® 2WAY-centre. Any attempt at manipulation will trigger an alarm. The sabotage-protected, weather-resistant metal case is attached on the outside wall where it can easily be seen. Often, the presence of an outside siren is enough to deter potential thieves.