With this weather-resistant transponder lock code, you can cover a variety of access scenarios. The weatherproof and vandalism-proof, metal housing can also be easily used outdoors. A further protection against manipulation is guaranteed by a separate evaluation unit. The backlit metal keypad allows easy to use. The access can be authorized by pin code and/or transponder card. A variety of interfaces further expand the application options.
The code lock combines modern design and a high-quality casing. It can be mounted without any problem both indoors and outdoors. The glass surface and the backlighting emphasise the modern design. About 100 million code combinations can be used for the 99 possible codes.
This combination lock combines modern design and a waterproof casing. It is suitable for both indoor and outdoor use. The slimline design enables unobtrusive installation within compact spaces. Over 100 million code combinations can be used for the 99 possible codes.
This code lock is perfect for outside use. The membrane keypad and sealing frame on the rear of the code lock provide excellent protection against splash water (IP 54). A 4-figure number combination, which can be coded as required, allows you to use the membrane push buttons to switch a device on or off, for example to control alarm systems. At the same time, two different operating modes are available for the relay outputs (toggle or momentary action).
This combination of code lock and doorbell has proven itself again and again as a great access control for buildings, rooms or sensitive IT areas. An unbelievably wide range of different code and user combinations is available. In addition to programming individual access codes, you can also determine which of the two output relays is activated by the code entry. If a code is entered incorrectly 10 times, the keypad can be locked or a quiet alarm triggered. In addition, an integrated sabotage contact reliably protects against unauthorized opening of the case.
The DCS 3000 code lock is perfect for outdoor use. The keyboard is effectively protected against sabotage by a metal front. The sabotage contact operates when the housing is opened to prevent interference with the system. In the event of a power failure the individual code is maintained for up to 48 hours. This may be a combination of between 1 and 12 digits. There is a jumper to set the voltage-free relay output to momentary or latching action.
This code lock can do more than simply open a door. By individually assigning code combinations, you can target activation of two different output relays, so that this system is also well suited for controlling plant and machinery. An unbelievably wide range of different code and user combinations is available. If a code is entered incorrectly 10 times, the keypad can be locked or a quiet alarm triggered. In addition, an integrated sabotage contact reliably protects against unauthorized opening of the case. The 3 integrated LEDs can be switched as required to indicate the system state.
This combination lock has been developed specifically for flush mounting and provides unobtrusive and elegant security for entrances and side entrances. The stainless steel surface is weatherproof and withstands temperatures from -20 to +60C. The 5 A capacity switch relay can also be programmed in timed trigger mode from 1999. Its installation depth is just 31 mm. The combination lock is equipped with background lighting and 3 status LEDs. The built-in sabotage contact lets you connect the lock to an alarm system and provides extra protection against unwanted intruders.
This code lock combines two devices in one! You can open the door just by number combination or with a code card The code lock possesses two exits, which can respectively store 500 users. Output one can save 500 number combinations or 500 code cards or 500 number combinations + code cards. The second output is programmable for 500 numbers combinations.
If you want to activate an alarm system, open a garage door or actuate the door opener with one device. Up until now, to do this, you needed 3 code locks. The DK-9880 combines all three in one. It is also perfect for use as a doorbell and access control. Due to its high temperature resistance, the keypad is suitable for exterior mounting. To protect against tampering, the controller unit is attached separately from the keypad. The code lock is easily programmed through the keypad. 1 master and 3 user codes are available. To make code-breaking almost impossible, individual codes of up to 8 digits can be programmed. The potential free relay can be programmed as a switch or button.
This Combination lock combines two Devices in one! You can simply open the Door by Number combination or with a Code card. The Combination lock has two outputs, each capable of storing 500 users. One output thing can save 500 Combinations of numbers or 500 Code cards, or 500 Number combinations + Code cards. The second output is programmable for 500 Numbers. The Code lock is suitable for Indoor use.
The combination lock combines modern design and a waterproof case. Both indoor and outdoor, it can easily be incorporated. The glass surface and the white backlighting to emphasize the modern design. About 100 million code combinations can be used for the 99 possible codes.