This GSM-Dialer has 3 Alarm-eg inputs for PIR-Detectors, Magnetic contacts and an Alarm-Output. The Alarm-Output can be used as a relay or Trigger-Output, eg to be connected to an Alarm system. Dispatched one of the three Alarm-Inputs, a notification SMS is sent to the programmed Phone number. With a Text-SMS you can Activate or Deactivate Alarm output.
GSM interface for surveillance and control via telephone. 4 alarm inputs for (e.g.) PIR sensors or magnetic contacts, which can assign 2 SMS messages for the case of an alarm. The optionally offered language module can transfer up to 4 reporting texts (max. 40 s). There are 4 alarm outputs (1 relay + 3 Transistor) available, which you can activate and/or deactivate by means of SMS messages. In this way, you can control the heating, the water boiler or the alarm system from a mobile phone. If necessary, you can even connect your GSM interface to an existing telephone line and use the available terminal device at the interface. If the telephone line goes down due to a fault, your GSM interface simulates the analogue connection and your terminal device will work perfectly using GSM transmission. Configuration via a mobile telephone or using the software provided.