About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store
Filters

Filters

[*] [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z]
Price: £ - £
Components > Switches & buttons > Pressure switch & button > Pushbuttons
Available
Pushbutton white round
Pushbutton White Round
    Application: All areas of
    IC technology,
    microcomputer technology,
    remote control,
    measurement and control
    units, electronic games.
    Its small dimensions
    allow it to be used in
    keypads with a minimum
    spacing of 12.7 mm. The
    tight-fitting knobs are
    available in many colours
    and may be used for
    direct front-panel
    mounting. With noticeable
    switching point.
Availability: In Stock
£0.78
Available
RF 15 non-illuminated contact silver
RF 15 Non-illuminated Contact
Silver
    A button cap may be
    fitted to the
    non-illuminated button if
    alternative labelling is
    required or a height of
    12.5 mm has to be
    reached. The labelling on
    the button cap is visible
    through a window in the
    deco film. The button cap
    may be exchanged to
    modify the labelling.
Availability: In Stock
£1.63
Available
Racon 12H PA inside
Racon 12H PA Inside
    The Racon 12 h button in
    the RAFI provides
    extremely reliable
    switching and requires
    very little space. The
    buttons may be used
    singly or in keypads.
    Suitable for use with the
    most important soldering
    processes, such as wave,
    reflow (SMD), hot stamp
    (SMD) and laser soldering
    (SMD). The buttons may be
    pre-tensioned, i.e. the
    button caps are lightly
    pressed against the front
    panel (prevents
    rattling). Furthermore
    tolerances up to 0.3 mm
    can be compensated.
Availability: In Stock
£1.07
Available
INPUT KEY RED ILLUMINATED
INPUT KEY RED ILLUMINATED
    Specially designed for
    the manufacture of
    electronic input devices.
    Application in the entire
    IC technology, in the
    microcomputer technology,
    with remote maintenance,
    measuring and
    controlling devices,
    electronic plays, switch
    and control locations,
    household machines or
    telephone intercom
    systems. Its small
    dimensions allow it to be
    used in keypads with a
    minimum spacing of 12.7
    mm.
Availability: In Stock
£2.14
Available
INPUT KEY YELLOW ILLUMINATED
INPUT KEY YELLOW ILLUMINATED
    Specially designed for
    the manufacture of
    electronic input devices.
    Application in the entire
    IC technology, in the
    microcomputer technology,
    with remote maintenance,
    measuring and
    controlling devices,
    electronic plays, switch
    and control locations,
    household machines or
    telephone intercom
    systems. Its small
    dimensions allow it to be
    used in keypads with a
    minimum spacing of 12.7
    mm.
Availability: In Stock
£2.14
Available
INPUT KEY GREEN ILLUMINATED
INPUT KEY GREEN ILLUMINATED
    Specially designed for
    the manufacture of
    electronic input devices.
    Application in the entire
    IC technology, in the
    microcomputer technology,
    with remote maintenance,
    measuring and
    controlling devices,
    electronic plays, switch
    and control locations,
    household machines or
    telephone intercom
    systems. Its small
    dimensions allow it to be
    used in keypads with a
    minimum spacing of 12.7
    mm.
Availability: In Stock
£2.14
Available
M30 push switch
M30 Push Switch
    The ELOBAU pushbutton
    switches function on the
    basis of a reed contact.
    The reed contact element
    is cast in a hermetically
    sealed state. This
    results in a high level
    of protection and a very
    long service life. The
    button caps are available
    in red, black and green.
Availability: In Stock
£16.33
Available
M30 push switch
M30 Push Switch
    The ELOBAU pushbutton
    switches function on the
    basis of a reed contact.
    The reed contact element
    is cast in a hermetically
    sealed state. This
    results in a high level
    of protection and a very
    long service life. The
    button caps are available
    in red, black and green.
Availability: In Stock
£16.33
Available
Racon 12H SMD-gullwing
Racon 12H SMD-gullwing
    The Racon 12 h button in
    the RAFI provides
    extremely reliable
    switching and requires
    very little space. The
    buttons may be used
    singly or in keypads.
    Suitable for use with the
    most important soldering
    processes, such as wave,
    reflow (SMD), hot stamp
    (SMD) and laser soldering
    (SMD). The buttons may be
    pre-tensioned, i.e. the
    button caps are lightly
    pressed against the front
    panel (prevents
    rattling). Furthermore
    tolerances up to 0.3 mm
    can be compensated.
Availability: In Stock
£0.98
Available
Button racoN 8H PA inside
Button RacoN 8H PA Inside
    The Racon 8 h button in
    the RAFI provides
    extremely reliable
    switching and requires
    very little space. The
    buttons may be used
    singly or in keypads.
    Suitable for use with the
    most important soldering
    processes, such as wave,
    reflow (SMD), hot stamp
    (SMD) and laser soldering
    (SMD). The buttons may be
    pre-tensioned, i.e. the
    button caps are lightly
    pressed against the front
    panel (prevents
    rattling). Furthermore
    tolerances up to 0.3 mm
    can be compensated.
Availability: In Stock
£1.06
Available
M30 push switch
M30 Push Switch
    The ELOBAU pushbutton
    switches function on the
    basis of a reed contact.
    The reed contact element
    is cast in a hermetically
    sealed state. This
    results in a high level
    of protection and a very
    long service life. The
    button caps are available
    in red, black and green.
Availability: In Stock
£16.33
Available
Racon 12H PA outside
Racon 12H PA Outside
    The Racon 12 h button in
    the RAFI provides
    extremely reliable
    switching and requires
    very little space. The
    buttons may be used
    singly or in keypads.
    Suitable for use with the
    most important soldering
    processes, such as wave,
    reflow (SMD), hot stamp
    (SMD) and laser soldering
    (SMD). The buttons may be
    pre-tensioned, i.e. the
    button caps are lightly
    pressed against the front
    panel (prevents
    rattling). Furthermore
    tolerances up to 0.3 mm
    can be compensated.
Availability: In Stock
£1.14
Available
RF 15 non-illuminated contact gold
RF 15 Non-illuminated Contact
Gold
    A button cap may be
    fitted to the
    non-illuminated button if
    alternative labelling is
    required or a height of
    12.5 mm has to be
    reached. The labelling on
    the button cap is visible
    through a window in the
    deco film. The button cap
    may be exchanged to
    modify the labelling.
Availability: In Stock
£1.68
Available
M30 push switch
M30 Push Switch
    The ELOBAU push switch
    functions on the basis of
    a Reed contact. The Reed
    contact element is cast
    in a hermetically sealed
    state. This results in a
    high level of protection
    and a very long service
    life. The button caps are
    available in red, black
    and green.
Availability: In Stock
£16.33
Available
T-basic body
T-basic Body
    Specially designed for
    the manufacture of
    electronic input devices.
    Application in the entire
    IC technology, in the
    microcomputer technology,
    with remote maintenance,
    measuring and
    controlling devices,
    electronic plays, switch
    and control locations,
    household machines or
    telephone intercom
    systems. Its small
    dimensions allow it to be
    used in keypads with a
    minimum spacing of 12.7
    mm.
Availability: In Stock
£1.28
Available
Pushbutton red round
Pushbutton Red Round
    Application: All areas of
    IC technology,
    microcomputer technology,
    remote control,
    measurement and control
    units, electronic games.
    Its small dimensions
    allow it to be used in
    keypads with a minimum
    spacing of 12.7 mm. The
    tight-fitting knobs are
    available in many colours
    and may be used for
    direct front-panel
    mounting. With noticeable
    switching point.
Availability: In Stock
£0.78
Available
Button racon 8H SMD gullwing
Button Racon 8H SMD Gullwing
    The Racon 8 h button in
    the RAFI provides
    extremely reliable
    switching and requires
    very little space. The
    buttons may be used
    singly or in keypads.
    Suitable for use with the
    most important soldering
    processes, such as wave,
    reflow (SMD), hot stamp
    (SMD) and laser soldering
    (SMD). The buttons may be
    pre-tensioned, i.e. the
    button caps are lightly
    pressed against the front
    panel (prevents
    rattling). Furthermore
    tolerances up to 0.3 mm
    can be compensated.
Availability: In Stock
£0.98
Available
Short-travel pushbutton stainless steel
Short-travel Pushbutton
Stainless Steel
    This push button was
    specially developed for
    design-oriented
    applications and is
    available in anodized
    aluminium or stainless
    steel. The actuator is
    protected against
    accidental operation and
    only has a lift of 0.8
    mm. The button can be
    installed in front panels
    up to 8 mm thick and is
    fixed using a metal nut.
    Mounting depth 24mm.
Availability: In Stock
£13.28
Available
Pushbutton anodised aluminium
Pushbutton Anodised Aluminium
    Includes a changeover
    mechanism (see diagram A,
    page 694) and may be
    used as switches or push
    buttons (no
    illumination). Mounted
    with metal fixing nuts
    for control panel
    thicknesses up to 15 mm.
    The contact elements
    (max. 2) can be attached
    to both sides of the
    housing and are locked
    centrally by a quarter
    turn of the red locking
    pin (see diagram B, page
    694). Additional contact
    elements may be ordered
    separately (see contact
    elements).
Availability: In Stock
£26.62
Available
Short-travel pushbutton aluminium/green
Short-travel Pushbutton
Aluminium/green
    This push button was
    specially developed for
    design-oriented
    applications and is
    available in anodized
    aluminium or stainless
    steel. The actuator is
    protected against
    accidental operation and
    only has a lift of 0.8
    mm. The button can be
    installed in front panels
    up to 8 mm thick and is
    fixed using a metal nut.
    Mounting depth 24mm.
Availability: In Stock
£13.28
Available
M12 micro push switch
M12 Micro Push Switch
    The ELOBAU pushbutton
    switches function on the
    basis of a reed contact.
    The reed contact element
    is cast in a hermetically
    sealed state. This
    results in a high level
    of protection and a very
    long service life. The
    button caps are available
    in red, black and green.
Availability: In Stock
£15.23
Available
M30 push switch
M30 Push Switch
    The ELOBAU pushbutton
    switches function on the
    basis of a reed contact.
    The reed contact element
    is cast in a hermetically
    sealed state. This
    results in a high level
    of protection and a very
    long service life. The
    button caps are available
    in red, black and green.
Availability: In Stock
£16.33
Available
Short-travel pushbutton aluminium/red
Short-travel Pushbutton
Aluminium/red
    This push button was
    specially developed for
    design-oriented
    applications and is
    available in anodized
    aluminium or stainless
    steel. The actuator is
    protected against
    accidental operation and
    only has a lift of 0.8
    mm. The button can be
    installed in front panels
    up to 8 mm thick and is
    fixed using a metal nut.
    Mounting depth 24mm.
Availability: In Stock
£13.28
Available
M12 micro push switch
M12 Micro Push Switch
    The ELOBAU pushbutton
    switches function on the
    basis of a reed contact.
    The reed contact element
    is cast in a hermetically
    sealed state. This
    results in a high level
    of protection and a very
    long service life. The
    button caps are available
    in red, black and green.
Availability: In Stock
£19.51
Available
M12 micro push switch
M12 Micro Push Switch
    The ELOBAU pushbutton
    switches function on the
    basis of a reed contact.
    The reed contact element
    is cast in a hermetically
    sealed state. This
    results in a high level
    of protection and a very
    long service life. The
    button caps are available
    in red, black and green.
Availability: In Stock
£15.23
Available
M30 push switch
M30 Push Switch
    The ELOBAU pushbutton
    switches function on the
    basis of a reed contact.
    The reed contact element
    is cast in a hermetically
    sealed state. This
    results in a high level
    of protection and a very
    long service life. The
    button caps are available
    in red, black and green.
Availability: In Stock
£16.33
Available
Short-travel pushbutton alu/yellow
Short-travel Pushbutton
Alu/yellow
    This pushbutton was
    developed especially for
    design-conscious
    applications and is
    available in anodised
    aluminium or stainless
    steel. The actuator is
    protected against
    accidental use and has a
    travel of just 0.8 mm.
    The pushbutton can be
    mounted in front panels
    up to 8 mm thick and is
    fixed by a metal nut.
    Installation depth 24 mm.
Availability: In Stock
£13.28
Available
Short-travel pushbutton alu/neutral
Short-travel Pushbutton
Alu/neutral
    This push button was
    specially developed for
    design-oriented
    applications and is
    available in anodized
    aluminium or stainless
    steel. The actuator is
    protected against
    accidental operation and
    only has a lift of 0.8
    mm. The button can be
    installed in front panels
    up to 8 mm thick and is
    fixed using a metal nut.
    Mounting depth 24mm.
Availability: In Stock
£13.28
Available
Short-travel pushbutton aluminium/black
Short-travel Pushbutton
Aluminium/black
    This push button was
    specially developed for
    design-oriented
    applications and is
    available in anodized
    aluminium or stainless
    steel. The actuator is
    protected against
    accidental operation and
    only has a lift of 0.8
    mm. The button can be
    installed in front panels
    up to 8 mm thick and is
    fixed using a metal nut.
    Mounting depth 24mm.
Availability: In Stock
£14.08
Available
Pushbutton black round
Pushbutton Black Round
    Application: All areas of
    IC technology,
    microcomputer technology,
    remote control,
    measurement and control
    units, electronic games.
    Its small dimensions
    allow it to be used in
    keypads with a minimum
    spacing of 12.7 mm. The
    tight-fitting knobs are
    available in many colours
    and may be used for
    direct front-panel
    mounting. With noticeable
    switching point.
Availability: In Stock
£0.78
Available
M12 micro push switch
M12 Micro Push Switch
    The ELOBAU pushbutton
    switches function on the
    basis of a reed contact.
    The reed contact element
    is cast in a hermetically
    sealed state. This
    results in a high level
    of protection and a very
    long service life. The
    button caps are available
    in red, black and green.
Availability: In Stock
£15.23
Available
M12 micro push switch
M12 Micro Push Switch
    The ELOBAU pushbutton
    switches function on the
    basis of a reed contact.
    The reed contact element
    is cast in a hermetically
    sealed state. This
    results in a high level
    of protection and a very
    long service life. The
    button caps are available
    in red, black and green.
Availability: In Stock
£19.51
Available
M12 micro push switch
M12 Micro Push Switch
    The ELOBAU pushbutton
    switches function on the
    basis of a reed contact.
    The reed contact element
    is cast in a hermetically
    sealed state. This
    results in a high level
    of protection and a very
    long service life. The
    button caps are available
    in red, black and green.
Availability: In Stock
£19.51
Available
Button racon 8H PA outside
Button Racon 8H PA Outside
    The Racon 8 h button in
    the RAFI provides
    extremely reliable
    switching and requires
    very little space. The
    buttons may be used
    singly or in keypads.
    Suitable for use with the
    most important soldering
    processes, such as wave,
    reflow (SMD), hot stamp
    (SMD) and laser soldering
    (SMD). The buttons may be
    pre-tensioned, i.e. the
    button caps are lightly
    pressed against the front
    panel (prevents
    rattling). Furthermore
    tolerances up to 0.3 mm
    can be compensated.
Availability: In Stock
£1.06
Contact Us
Let us dent the universe not by a single action but by billions of innovations that define us as humans
  • productWIKI, St Austell Close, Stafford, Staffordshire, ST17 0EE, United Kingdom
  • web@productwiki.co.uk
  • +44 (0) 20 8191 9063
  • Mon-Sat 8:30am - 5:30pm
Information
My Account
Newsletter
Subscribe to our newsletter for latest offers
© Copyright productWIKI 2022 All rights reserved.
Menu