Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
By procuring a power/force on a high-grade steel pestle/tappet, the behaviour of Piezo-resistance -measuring bridges gets changed within the sensor. This takes place very fastly and the occuring resistance change because of it is proportional to the created force, shown by a corresponding mV-Signal at the outlet.
Long-term-stable pressure transmitter with hermetically welded thin film measuring cell. Small total error by electronic calibration and extremely burst-resistant by high-grade steel diaphragm. Wide industrial application in e.g. hydraulics, pneumatics, environment, process, semiconductor and car technology by high accuracy and robust, compact design.
This differential pressure sensor is used to measure the pressure difference between two points. One example of the use of this sensor is measuring the pressure drop across an air filter in a duct. The sensor output is calibrated across the range from 0.5 to 4.5 V. Temperature compensation across the range from 0 to +85 º C. Manufacturer: Freescale®
Pressure sensors are like membrane switches, but in contrast to conventional switches their resistance changes when pressure is applied in the normal direction. Finger pressure of 10 g to 10kg on a sensor causes the resistance to fall from around 2 MO to > 3 KO. Approx. 10, 000, 000 activations
Pressure sensors are like membrane switches, but in contrast to conventional switches their resistance changes when pressure is applied in the normal direction. Finger pressure of 10 g to 10kg on a sensor causes the resistance to fall from around 2 MO to > 3 KO. Approx. 10, 000, 000 activations
By procuring a power/force on a high-grade steel pestle/tappet, the behaviour of Piezo-resistance -measuring bridges gets changed within the sensor. This takes place very fastly and the occuring resistance change because of it is proportional to the created force, shown by a corresponding mV-Signal at the outlet.
This surface-mounted, microprocessor-controlled sensor provides highly accurate gas pressure measurements in the overpressure and vacuum range. Mechanical wear is avoided by the use of modern pressure sensor technology and conditioning electronics. The sensor has an analogue output with 0.1% resolution and two switching digital outputs with a choice of four signal output modes.
Long-term-stable pressure transmitter with hermetically welded thin film measuring cell. Small total error by electronic calibration and extremely burst-resistant by high-grade steel diaphragm. Wide industrial application in e.g. hydraulics, pneumatics, environment, process, semiconductor and car technology by high accuracy and robust, compact design.
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
Pressure sensors are like membrane switches, but in contrast to conventional switches their resistance changes when pressure is applied in the normal direction. Finger pressure of 10 g to 10kg on a sensor causes the resistance to fall from around 2 MO to > 3 KO. Approx. 10, 000, 000 activations
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
Pressure sensors are like membrane switches, but in contrast to conventional switches their resistance changes when pressure is applied in the normal direction. Finger pressure of 10 g to 10kg on a sensor causes the resistance to fall from around 2 MO to > 3 KO. Approx. 10, 000, 000 activations
This sensor has on-chip temperature compensation and is laser-calibrated. As the output voltage is linear with the pressure the signal is particularly easy to interpret. The excellent characteristics of these sensors are useful for many applications such as flow measurement, volume indicators, pressure-operated switches and weather stations. Manufacturer: Freescale®
This range of miniature pressure switches is suitable for setting up indirect level indicators (direct contact with the medium should be avoided as measurement is by over/under pressure). Over/under pressure systems can be constructed by means of two separate pressure connectors. The desired switching threshold (within the typical range) can be adjusted infinitely using an adjusting screw.
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
Long-term-stable pressure transmitter with hermetically welded thin film measuring cell. Small total error by electronic calibration and extremely burst-resistant by high-grade steel diaphragm. Wide industrial application in e.g. hydraulics, pneumatics, environment, process, semiconductor and car technology by high accuracy and robust, compact design.
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
This range of miniature pressure switches is suitable for setting up indirect level indicators (direct contact with the medium should be avoided as measurement is by over/under pressure). Over/under pressure systems can be constructed by means of two separate pressure connectors. The desired switching threshold (within the typical range) can be adjusted infinitely using an adjusting screw.
This surface-mounted, microprocessor-controlled sensor provides highly accurate gas pressure measurements in the overpressure and vacuum range. Mechanical wear is avoided by the use of modern pressure sensor technology and conditioning electronics. The sensor has an analogue output with 0.1% resolution and two switching digital outputs with a choice of four signal output modes.
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
This sensor measures with high precision and offset-free with an outstanding cost-performance ratio in air as well as dry gases owing to the CMOSens technology They offer high measuring accuracy and resolution in particular in range of very small differential pressures. The CMOSens technology makes possible the output of fully temperature-compensated signals
Pressure sensor in miniature housing Two digital outputs Measurement range from 1 - 10 bar Selectable pressure units: bar, kPa, psi, etc. Three-color dual display. Simultaneous display of actual and threshold Status indication by LEDs. Applications: flow measurement, pressure monitoring.
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
This sensor measures with high precision and offset-free with an outstanding cost-performance ratio in air as well as dry gases owing to the CMOSens technology They offer high measuring accuracy and resolution in particular in range of very small differential pressures. The CMOSens technology makes possible the output of fully temperature-compensated signals
This range of miniature pressure switches is suitable for setting up indirect level indicators (direct contact with the medium should be avoided as measurement is by over/under pressure). Over/under pressure systems can be constructed by means of two separate pressure connectors. The desired switching threshold (within the typical range) can be adjusted infinitely using an adjusting screw.
This sensor measures with high precision and offset-free with an outstanding cost-performance ratio in air as well as dry gases owing to the CMOSens technology They offer high measuring accuracy and resolution in particular in range of very small differential pressures. The CMOSens technology makes possible the output of fully temperature-compensated signals
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
This range of miniature pressure switches is suitable for setting up indirect level indicators (direct contact with the medium should be avoided as measurement is by over/under pressure). Over/under pressure systems can be constructed by means of two separate pressure connectors. The desired switching threshold (within the typical range) can be adjusted infinitely using an adjusting screw.
Rugged pressure sensor designed and manufactured in accordance with the requirements of the automotive industry. To measure the pressure in liquid media, for example engine oil and fuel. Versatile use in passenger cars, commercial vehicles or in industrial electronics. Suitable for heat sink see part no. 74 97 50.
Rugged pressure sensor designed and manufactured in accordance with the requirements of the automotive industry. To measure the pressure in liquid media, for example engine oil and fuel. Versatile use in passenger cars, commercial vehicles or in industrial electronics.
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
This range of miniature pressure switches is suitable for setting up indirect level indicators (direct contact with the medium should be avoided as measurement is by over/under pressure). Over/under pressure systems can be constructed by means of two separate pressure connectors. The desired switching threshold (within the typical range) can be adjusted infinitely using an adjusting screw.
Pressure sensors are like membrane switches, but in contrast to conventional switches their resistance changes when pressure is applied in the normal direction. Finger pressure of 10 g to 10kg on a sensor causes the resistance to fall from around 2 MO to > 3 KO. Approx. 10, 000, 000 activations
This surface-mounted, microprocessor-controlled sensor provides highly accurate gas pressure measurements in the overpressure and vacuum range. Mechanical wear is avoided by the use of modern pressure sensor technology and conditioning electronics. The sensor has an analogue output with 0.1% resolution and two switching digital outputs with a choice of four signal output modes.
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
Long-term-stable pressure transmitter with hermetically welded thin film measuring cell. Small total error by electronic calibration and extremely burst-resistant by high-grade steel diaphragm. Wide industrial application in e.g. hydraulics, pneumatics, environment, process, semiconductor and car technology by high accuracy and robust, compact design.
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
Pressure sensor in miniature housing Two digital outputs Measurement range from 1 - 10 bar Selectable pressure units: bar, kPa, psi, etc. Three-color dual display. Simultaneous display of actual and threshold Status indication by LEDs. Applications: flow measurement, pressure monitoring.
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
The absolute pressure sensor MPXS4100/MPXA4100 already includes an operational amplifier and resistor networks for accurate, temperature-compensated signal output. The output voltage is proportional to the pressure measurement and varies from 0.3 V at 20 kPa to 4.9 V at 105 kPa. This allows it to be connected directly to displays, A/D converters and microprocessor systems with a minimum of external components. Manufacturer: Freescale®
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
Pressure sensors are like membrane switches, but in contrast to conventional switches their resistance changes when pressure is applied in the normal direction. Finger pressure of 10 g to 10kg on a sensor causes the resistance to fall from around 2 MO to > 3 KO. Approx. 10, 000, 000 activations
This range of miniature pressure switches is suitable for setting up indirect level indicators (direct contact with the medium should be avoided as measurement is by over/under pressure). Over/under pressure systems can be constructed by means of two separate pressure connectors. The desired switching threshold (within the typical range) can be adjusted infinitely using an adjusting screw.
Pressure sensors are like membrane switches, but in contrast to conventional switches their resistance changes when pressure is applied in the normal direction. Finger pressure of 10 g to 10kg on a sensor causes the resistance to fall from around 2 MO to > 3 KO. Approx. 10, 000, 000 activations
Very economical pressure sensor with large temperature range and an accuracy of ± 1% It is calibrated and temperature-compensated and delivers a stable output signal in the temperature range of 0 +70 ° C Absolute pressure sensor - an internal vacuum serves as reference Suitable for non-corrosive mediums The output voltage conducts proportionally to absolute pressure.
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
This sensor measures with high precision and offset-free with an outstanding cost-performance ratio in air as well as dry gases owing to the CMOSens technology They offer high measuring accuracy and resolution in particular in range of very small differential pressures. The CMOSens technology makes possible the output of fully temperature-compensated signals
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
High-quality, ceramic pressure measuring cell in thick-film technology for the measurement of static and dynamic relative pressures in liquids or gases as well as in industrial applications. Precise temperature-compensated (laser-trimmed), thus simple electronic evaluation, outstanding stability against aggressive and corrosive mediums
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
This sensor measures with high precision and offset-free with an outstanding cost-performance ratio in air as well as dry gases owing to the CMOSens technology They offer high measuring accuracy and resolution in particular in range of very small differential pressures. The CMOSens technology makes possible the output of fully temperature-compensated signals
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
This sensor measures with high precision and offset-free with an outstanding cost-performance ratio in air as well as dry gases owing to the CMOSens technology They offer high measuring accuracy and resolution in particular in range of very small differential pressures. The CMOSens technology makes possible the output of fully temperature-compensated signals
Long-term-stable pressure transmitter with hermetically welded thin film measuring cell. Small total error by electronic calibration and extremely burst-resistant by high-grade steel diaphragm. Wide industrial application in e.g. hydraulics, pneumatics, environment, process, semiconductor and car technology by high accuracy and robust, compact design.
Rugged pressure sensor designed and manufactured in accordance with the requirements of the automotive industry. To measure the pressure in liquid media, for example engine oil and fuel. Versatile use in passenger cars, commercial vehicles or in industrial electronics.
Long-term-stable pressure transmitter with hermetically welded thin film measuring cell. Small total error by electronic calibration and extremely burst-resistant by high-grade steel diaphragm. Wide industrial application in e.g. hydraulics, pneumatics, environment, process, semiconductor and car technology by high accuracy and robust, compact design.
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics
Universal pressure module with digital I2C and analoge interface 0 - 5 V. temperature compensated and calibrated, high accuracy, environmentally resistant and long-term stability. Calibrated output signal Area of application: Climate technology, building automation, Car electronics