About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store
Filters

Filters

[*] [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z]
Price: £ - £
Components > Sensors > Flow/Fill Level Sensors/Switches
Available
Easyflow-mini flowmeter 1.5-25 l/min
Easyflow-mini Flowmeter 1.5-25
L/min
    For measuring the outflow
    of water. Never run dry
    again with the
    EASYFLOW-mini!
    Particularly suitable for
    measuring water
    consumption on board or
    in other storage
    containers. The compact
    unit has built-in
    dimensions (control panel
    cut-out W x H) 45 (+0.6)
    x 22.2 mm (+0.3) and is
    easy to install.
    Operation is
    straight-forward and the
    display can be reset to
    zero when the tank is
    filled by pressing the R
    button. The EASYFLOW-mini
    is tuned to the sensor
    supplied with the device.
Availability: In Stock
£161.07
Available
Ait flow rate sensor AWM series Honeywell
Ait Flow Rate Sensor AWM
Series Honeywell
    This air flow sensor
    works according to the
    principle of the hot film
    anemometer and uses the
    cooling effect over the
    surface of the sensor
    element striking air
    current The output
    voltage changes in equal
    measure like air or gas
    flow by inlet and
    discharge openings of the
    sensor casing.
    Constructed with thin
    film, thermal insulated
    bridge structure with
    heat and two temperature
    sensor elements The
    bridge structure makes
    possible high measuring
    sensitivity as well as
    fast response time on
    air/gas flow over the
    chip. The two temperature
    sensors with central
    heating element lying
    between them make
    possible the detection of
    the direction of current
    and the measurement of
    the flow Made from two
    existing Wheatstone
    bridges, passive element
Availability: In Stock
£99.09
Available
Ait flow rate sensor AWM series Honeywell
Ait Flow Rate Sensor AWM
Series Honeywell
    This air flow sensor
    works according to the
    principle of the hot film
    anemometer and uses the
    cooling effect over the
    surface of the sensor
    element striking air
    current The output
    voltage changes in equal
    measure like air or gas
    flow by inlet and
    discharge openings of the
    sensor casing.
    Constructed with thin
    film, thermal insulated
    bridge structure with
    heat and two temperature
    sensor elements The
    bridge structure makes
    possible high measuring
    sensitivity as well as
    fast response time on
    air/gas flow over the
    chip. The two temperature
    sensors with central
    heating element lying
    between them make
    possible the detection of
    the direction of current
    and the measurement of
    the flow Made from two
    existing Wheatstone
    bridges, passive element
Availability: In Stock
£160.89
Available
Ait flow rate sensor AWM series Honeywell
Ait Flow Rate Sensor AWM
Series Honeywell
    This air flow sensor
    works according to the
    principle of the hot film
    anemometer and uses the
    cooling effect over the
    surface of the sensor
    element striking air
    current The output
    voltage changes in equal
    measure like air or gas
    flow by inlet and
    discharge openings of the
    sensor casing.
    Constructed with thin
    film, thermal insulated
    bridge structure with
    heat and two temperature
    sensor elements The
    bridge structure makes
    possible high measuring
    sensitivity as well as
    fast response time on
    air/gas flow over the
    chip. The two temperature
    sensors with central
    heating element lying
    between them make
    possible the detection of
    the direction of current
    and the measurement of
    the flow Made from two
    existing Wheatstone
    bridges, passive element
Availability: In Stock
£103.79
Available
AIR FLOW SENSOR AWM3100V
AIR FLOW SENSOR AWM3100V
    This air flow sensor
    works according to the
    principle of the hot film
    anemometer and uses the
    cooling effect over the
    surface of the sensor
    element striking air
    current The output
    voltage changes in equal
    measure like air or gas
    flow by inlet and
    discharge openings of the
    sensor casing.
    Constructed with thin
    film, thermal insulated
    bridge structure with
    heat and two temperature
    sensor elements The
    bridge structure makes
    possible high measuring
    sensitivity as well as
    fast response time on
    air/gas flow over the
    chip. The two temperature
    sensors with central
    heating element lying
    between them make
    possible the detection of
    the direction of current
    and the measurement of
    the flow Made from two
    existing Wheatstone
    bridges, passive element
Availability: In Stock
£106.24
Available
AIR FLOW SENSOR AWM5102 UN
AIR FLOW SENSOR AWM5102 UN
    This Air-flow-Sensor
    processes according to
    the principle of
    Hotfilm-Anemometer and
    uses the cooling effect
    of the painted air
    current over the surface
    of sensor element. Thus
    the outlet voltage is
    changed in the same
    measure like the air- or
    gas current via the
    inlet- and outlet
    openings of sensor
    casings. Constructed with
    a thin film-,
    thermo-isolated bridge
    structure with heat- and
    two temperature sensor
    elements. The bridge
    structure enables high
    measuring sensitivity as
    well as fast response
    time on air-/gas current
    over the Chip. Both the
    temperature sensors with
    the heating element lying
    inbetween them, enables
    the recognition of the
    direction of the current
    and the measurement of
    efficiency. Made up of
    two Wheatstone-Bridges of
    existing, passive
    Element.
Availability: In Stock
£176.77
Available
AIR CURRENT SENSOR AWM5104 VC
AIR CURRENT SENSOR AWM5104 VC
    This Air-flow-Sensor
    processes according to
    the principle of
    Hotfilm-Anemometer and
    uses the cooling effect
    of the painted air
    current over the surface
    of sensor element. Thus
    the outlet voltage is
    changed in the same
    measure like the air- or
    gas current via the
    inlet- and outlet
    openings of sensor
    casings. Constructed with
    a thin film-,
    thermo-isolated bridge
    structure with heat- and
    two temperature sensor
    elements. The bridge
    structure enables high
    measuring sensitivity as
    well as fast response
    time on air-/gas current
    over the Chip. Both the
    temperature sensors with
    the heating element lying
    inbetween them, enables
    the recognition of the
    direction of the current
    and the measurement of
    efficiency. Made up of
    two Wheatstone-Bridges of
    existing, passive
    Element.
Availability: In Stock
£180.36
Available
LIQUID LEVEL SENSOR LLE101000
LIQUID LEVEL SENSOR LLE101000
    There is a LED and a
    photo transistor behind
    that plastic dome If
    there is no against the
    plastic dome, then the
    complete ray of light of
    LED is reflected back to
    the photo transistor. If
    liquid moistens the
    plastic domes, then the
    refractive index changes
    and less light reaches
    the transistor. One
    obtains a digital output
    signal (High at air) at
    output
Availability: In Stock
£43.75
Available
Flow controller FCC-01-CO
Flow Controller FCC-01-CO
    The FCC-01-CO is an
    all-purpose,
    microprocessor-controlled
    control and display unit.
    It is used for
    indicating, controlling,
    and regulating flow
    quantities. The limit
    value can be set and the
    sensor constant
    calibrated using the
    integrated keypad.
    Different operating modes
    can be selected.
Availability: In Stock
£169.46
Available
Flow meter 12-1000
Flow Meter 12-1000
    Specially designed for
    heavy-duty professional
    use for measuring large
    volumes in chemically
    aggressive media such as
    acids, bases and other
    aqueous media. All parts
    in contact with the
    medium are made from
    highly resistant plastics
    (PP, ECTFE, ceramic).
    Thanks to the
    high-quality ceramic
    bearings, the 5-blade
    paddle runs at even very
    low flow rates and the
    magnets are hermetically
    sealed. The contactless
    sensor system ensures an
    almost unlimited
    lifetime. The FCH-SE
    generates fully
    conditioned square-wave
    pulse signals (e.g. for
    the PLC). By changing the
    connector an analogue
    output module can be
    plugged into a 4-20 mA
    two-wire system. The two
    limiting values can be
    quickly programmed using
    a teach-in method.
Availability: In Stock
£333.45
Available
POM flowmeter, hose connection
POM Flowmeter, Hose Connection
    This compact flowmeter
    has been tried and tested
    in industrial
    applications (measuring,
    regulating, monitoring
    and metering
    instruments). The
    advantageous material
    combination of POM
    (Hostaform C),
    ceramically bonded
    magnets and a polished,
    hardened stainless steel
    shaft offers excellent
    smooth running
    characteristics combined
    with a broad chemical
    resistance range.
Availability: In Stock
£55.95
Available
Flow meter FCH-M
Flow Meter FCH-M
    The FCH-m flow meter is
    designed for measuring
    very small quantities in
    aqueous and viscous media
    up to 80 cST. The
    materials used are highly
    resistant to aggressive
    media. The magnets are
    hermetically sealed. The
    contactless sensor system
    ensures an almost
    unlimited lifetime and
    generates fully
    conditioned square-wave
    pulse signals (e.g. for
    the PLC).
Availability: In Stock
£20.47
Available
Flow meter FCH-SE 7.5-600
Flow Meter FCH-SE 7.5-600
    Specially designed for
    heavy-duty professional
    use for measuring large
    volumes in chemically
    aggressive media such as
    acids, bases and other
    aqueous media. All parts
    in contact with the
    medium are made from
    highly resistant plastics
    (PP, ECTFE, ceramic).
    Thanks to the
    high-quality ceramic
    bearings, the 5-blade
    paddle runs at even very
    low flow rates and the
    magnets are hermetically
    sealed. The contactless
    sensor system ensures an
    almost unlimited
    lifetime. The FCH-SE
    generates fully
    conditioned square-wave
    pulse signals (e.g. for
    the PLC). By changing the
    connector an analogue
    output module can be
    plugged into a 4-20 mA
    two-wire system. The two
    limiting values can be
    quickly programmed using
    a teach-in method.
Availability: In Stock
£295.45
Available
Flow meter FCH-SE 0-250
Flow Meter FCH-SE 0-250
    Specially designed for
    heavy-duty professional
    use for measuring large
    volumes in chemically
    aggressive media such as
    acids, bases and other
    aqueous media. All parts
    in contact with the
    medium are made from
    highly resistant plastics
    (PP, ECTFE, ceramic).
    Thanks to the
    high-quality ceramic
    bearings, the 5-blade
    paddle runs at even very
    low flow rates and the
    magnets are hermetically
    sealed. The contactless
    sensor system ensures an
    almost unlimited
    lifetime. The FCH-SE
    generates fully
    conditioned square-wave
    pulse signals (e.g. for
    the PLC). By changing the
    connector an analogue
    output module can be
    plugged into a 4-20 mA
    two-wire system. The two
    limiting values can be
    quickly programmed using
    a teach-in method.
Availability: In Stock
£264.95
Available
AIR FLOW SENSOR AWM43300V
AIR FLOW SENSOR AWM43300V
    This air flow sensor
    works according to the
    principle of the hot film
    anemometer and uses the
    cooling effect over the
    surface of the sensor
    element striking air
    current The output
    voltage changes in equal
    measure like air or gas
    flow by inlet and
    discharge openings of the
    sensor casing.
    Constructed with thin
    film, thermal insulated
    bridge structure with
    heat and two temperature
    sensor elements The
    bridge structure makes
    possible high measuring
    sensitivity as well as
    fast response time on
    air/gas flow over the
    chip. The two temperature
    sensors with central
    heating element lying
    between them make
    possible the detection of
    the direction of current
    and the measurement of
    the flow Made from two
    existing Wheatstone
    bridges, passive element
Availability: In Stock
£124.10
Available
AIR FLOW SENSOR AWM2100V
AIR FLOW SENSOR AWM2100V
    This air flow sensor
    works according to the
    principle of the hot film
    anemometer and uses the
    cooling effect over the
    surface of the sensor
    element striking air
    current The output
    voltage changes in equal
    measure like air or gas
    flow by inlet and
    discharge openings of the
    sensor casing.
    Constructed with thin
    film, thermal insulated
    bridge structure with
    heat and two temperature
    sensor elements The
    bridge structure makes
    possible high measuring
    sensitivity as well as
    fast response time on
    air/gas flow over the
    chip. The two temperature
    sensors with central
    heating element lying
    between them make
    possible the detection of
    the direction of current
    and the measurement of
    the flow Made from two
    existing Wheatstone
    bridges, passive element
Availability: In Stock
£88.39
Available
GAS FLOW SENSOR EM1 L
GAS FLOW SENSOR EM1 L
    This mass flow meter
    represents a new
    generation of
    cost-effective sensor for
    gases The EM1 enables
    fast, accurate and
    reliable flow measurement
    in systems with up to 8
    bar pressure The sensor
    is suited to these
    properties and the
    integrated easy-to-RS232
    interface for use in a
    wide range of
    applications
Availability: In Stock
£244.45
Available
Flow m. FCH-M-POM-LC G1/8/2XM5)
Flow M. FCH-M-POM-LC
G1/8/2XM5)
    Flow meter for measuring
    the smallest quantities
    of water, petrol,
    diesel or fuel oil. It
    can be used for measuring
    consumption on cars,
    trucks, ultralight
    aircraft etc. All parts
    which come into contact
    with the fluid are made
    of durable plastic. The
    integrated Hall sensor
    supplies an accurate
    square-wave signal.
Availability: In Stock
£21.45
Available
FULL STATUS SENSOR LLE103000
FULL STATUS SENSOR LLE103000
    There is a LED and a
    photo transistor behind
    that plastic dome If
    there is no against the
    plastic dome, then the
    complete ray of light of
    LED is reflected back to
    the photo transistor. If
    liquid moistens the
    plastic domes, then the
    refractive index changes
    and less light reaches
    the transistor. One
    obtains a digital output
    signal (High at air) at
    output
Availability: In Stock
£43.75
Available
ARS 260 totaliser / flow controller
ARS 260 Totaliser / Flow
Controller
    With 2 counter inputs for
    measuring instantaneous
    and total flow. The ARS
    260 is a
    microprocessor-controlled,
    universal display and
    analysis unit for reading
    two separate pulse
    meters. The compact and
    rugged unit is
    specifically designed for
    industrial use. The
    device can detect any
    pulse shape from 5 to 24
    V/DC. Programmable scale.
Availability: In Stock
£120.26
Available
FULL STATUS SENSOR LLE205000
FULL STATUS SENSOR LLE205000
    There is a LED and a
    photo transistor behind
    that plastic dome If
    there is no against the
    plastic dome, then the
    complete ray of light of
    LED is reflected back to
    the photo transistor. If
    liquid moistens the
    plastic domes, then the
    refractive index changes
    and less light reaches
    the transistor. One
    obtains a digital output
    signal (High at air) at
    output
Availability: In Stock
£88.39
Available
Flow m. FCH-M-POM-LC conn. 6mm
Flow M. FCH-M-POM-LC Conn. 6mm
    Flow meter for measuring
    water, gasoline,
    diesel, fuel oil,
    lubricants, coolant and
    other liquid medim. Ideal
    for measuring small
    quantities of in Metering
    device and laboratory.
    All parts in contact with
    the medium are made from
    plastic. The integrated
    sensor provides an exact
    modulated signal.
Availability: In Stock
£24.78
Available
POM flowmeter, G 3/8" connection
POM Flowmeter, G 3/8"
Connection
    This flowmeter has been
    tried and tested in
    industrial applications
    (measuring, regulating,
    monitoring and metering
    instruments). The
    advantageous material
    combination of POM
    (Hostaform C),
    ceramically bonded
    magnets and a polished,
    hardened stainless steel
    shaft offers excellent
    smooth running
    characteristics combined
    with a broad chemical
    resistance range.
Availability: In Stock
£76.45
Available
FULL STATUS SENSOR LLN865172-1
FULL STATUS SENSOR LLN865172-1
    Full status sensor for
    hard industrial
    applications Accurate
    measurements are possible
    even under difficult
    conditions (shock,
    vibration, temperatures
    etc.) Equipped with
    polarity and overvoltage
    protection in stainless
    steel housing Thus a long
    ready status is made
    possible The type of
    casing allows a simple
    cleaning.
Availability: In Stock
£133.92
Available
GAS FLOW SENSOR EM1 V
GAS FLOW SENSOR EM1 V
    This mass flow meter
    represents a new
    generation of
    cost-effective sensor for
    gases The EM1 enables
    fast, accurate and
    reliable flow measurement
    in systems with up to 8
    bar pressure The sensor
    is suited to these
    properties and the
    integrated easy-to-RS232
    interface for use in a
    wide range of
    applications
Availability: In Stock
£244.45
Available
ARS 261 meter / flow controller
ARS 261 Meter / Flow
Controller
    With 2 counter inputs for
    measuring instantaneous
    and total flow. The ARS
    260 is a
    microprocessor-controlled,
    universal display and
    analysis unit for reading
    two separate pulse
    meters. The compact and
    rugged unit is
    specifically designed for
    industrial use. The
    device can detect any
    pulse shape from 5 to 24
    V/DC. Programmable scale.
Availability: In Stock
£117.08
Available
GAS FLOW SENSOR ASF1430
GAS FLOW SENSOR ASF1430
    The ASF mass flow sensor
    sets new benchmark with
    the measurement of flow
    rate. Our intelligent
    CMOSens technology makes
    possible an integrated,
    digital and reliable flow
    measurement at low cost
    The digital interface
    (RS232) is simple to
    implement and delivers
    fully calibrated complete
    temperature-compensated
    data.
Availability: In Stock
£211.42
Available
GAS FLOW SENSOR EM1 H
GAS FLOW SENSOR EM1 H
    This mass flow meter
    represents a new
    generation of
    cost-effective sensor for
    gases The EM1 enables
    fast, accurate and
    reliable flow measurement
    in systems with up to 8
    bar pressure The sensor
    is suited to these
    properties and the
    integrated easy-to-RS232
    interface for use in a
    wide range of
    applications
Availability: In Stock
£266.78
Available
GASFLOWSENSOR EM1 R
GASFLOWSENSOR EM1 R
    This mass flow meter
    represents a new
    generation of
    cost-effective sensor for
    gases The EM1 enables
    fast, accurate and
    reliable flow measurement
    in systems with up to 8
    bar pressure The sensor
    is suited to these
    properties and the
    integrated easy-to-RS232
    interface for use in a
    wide range of
    applications
Availability: In Stock
£244.45
Available
Flow meter FCH-SE 5-400
Flow Meter FCH-SE 5-400
    Specially designed for
    heavy-duty professional
    use for measuring large
    volumes in chemically
    aggressive media such as
    acids, bases and other
    aqueous media. All parts
    in contact with the
    medium are made from
    highly resistant plastics
    (PP, ECTFE, ceramic).
    Thanks to the
    high-quality ceramic
    bearings, the 5-blade
    paddle runs at even very
    low flow rates and the
    magnets are hermetically
    sealed. The contactless
    sensor system ensures an
    almost unlimited
    lifetime. The FCH-SE
    generates fully
    conditioned square-wave
    pulse signals (e.g. for
    the PLC). By changing the
    connector an analogue
    output module can be
    plugged into a 4-20 mA
    two-wire system. The two
    limiting values can be
    quickly programmed using
    a teach-in method.
Availability: In Stock
£287.95
Available
GAS FLOW SENSOR ASF1400
GAS FLOW SENSOR ASF1400
    The ASF mass flow sensor
    sets new benchmark with
    the measurement of flow
    rate. Our intelligent
    CMOSens technology makes
    possible an integrated,
    digital and reliable flow
    measurement at low cost
    The digital interface
    (RS232) is simple to
    implement and delivers
    fully calibrated complete
    temperature-compensated
    data.
Availability: In Stock
£211.42
Available
FULL STATUS SENSOR LLE102101
FULL STATUS SENSOR LLE102101
    There is a LED and a
    photo transistor behind
    that plastic dome If
    there is no against the
    plastic dome, then the
    complete ray of light of
    LED is reflected back to
    the photo transistor. If
    liquid moistens the
    plastic domes, then the
    refractive index changes
    and less light reaches
    the transistor. One
    obtains a digital output
    signal (High at air) at
    output
Availability: In Stock
£49.10
Available
LIQUID LEVEL SENSOR LLN865172-2
LIQUID LEVEL SENSOR
LLN865172-2
    Full status sensor for
    hard industrial
    applications Accurate
    measurements are possible
    even under difficult
    conditions (shock,
    vibration, temperatures
    etc.) Equipped with
    polarity and overvoltage
    protection in stainless
    steel housing Thus a long
    ready status is made
    possible The type of
    casing allows a simple
    cleaning.
Availability: In Stock
£133.92
Available
Optoelectronic pulse generator
Optoelectronic Pulse Generator
    This compact flow meter
    has been tried and tested
    in industrial
    applications (measuring,
    regulating, monitoring
    and metering
    instruments). The
    advantageous material
    combination of POM
    (Hostaform C) and a
    polished hardened
    stainless steel shaft
    offers excellent smooth
    running characteristics
    combined with a broad
    chemical resistance
    range. This analysis
    technique is particularly
    suitable for media which
    contain light magnetic
    debris but are optically
    translucent.
Availability: In Stock
£38.95
Available
Inductive pulse generator
Inductive Pulse Generator
    The advantageous material
    combination of POM
    (Hostaform C),
    ceramically bonded
    magnets and a polished,
    hardened stainless steel
    shaft offers excellent
    smooth running
    characteristics combined
    with a broad chemical
    resistance range. The
    inductive sensor system
    generates a sinusoidal
    output signal.
Availability: In Stock
£29.45
Available
FULL STATUS SENSOR LLE102000
FULL STATUS SENSOR LLE102000
    There is a LED and a
    photo transistor behind
    that plastic dome If
    there is no against the
    plastic dome, then the
    complete ray of light of
    LED is reflected back to
    the photo transistor. If
    liquid moistens the
    plastic domes, then the
    refractive index changes
    and less light reaches
    the transistor. One
    obtains a digital output
    signal (High at air) at
    output
Availability: In Stock
£43.75
Available
LEVEL SENSOR LLE105000
LEVEL SENSOR LLE105000
    There is a LED and a
    photo transistor behind
    that plastic dome If
    there is no against the
    plastic dome, then the
    complete ray of light of
    LED is reflected back to
    the photo transistor. If
    liquid moistens the
    plastic domes, then the
    refractive index changes
    and less light reaches
    the transistor. One
    obtains a digital output
    signal (High at air) at
    output
Availability: In Stock
£43.75
Available
Vision 2000 flowmeter turbine
Vision 2000 Flowmeter Turbine
    The only 59 x 17 x 31 mm
    wide measuring turbine is
    particularly suitable for
    measuring chemically
    highly aggressive media
    such as acids and lyes in
    the chemical industry and
    in electroplating, for
    monitoring machine
    cooling circuits, in the
    laboratory and in other
    metering technology
    applications. All parts
    in contact with the
    medium are made from
    plastic. The integral
    sensor generates an NPN
    open collector signal.
Availability: In Stock
£44.47
Contact Us
Let us dent the universe not by a single action but by billions of innovations that define us as humans
  • productWIKI, St Austell Close, Stafford, Staffordshire, ST17 0EE, United Kingdom
  • web@productwiki.co.uk
  • +44 (0) 20 8191 9063
  • Mon-Sat 8:30am - 5:30pm
Information
My Account
Newsletter
Subscribe to our newsletter for latest offers
© Copyright productWIKI 2022 All rights reserved.
Menu