The TowiTek universal access controller UAC400 is the central control unit for access control systems with up to 400 authorised identifications. A specific deletion of the individual lost identifications is possible comfortably thanks to the display. The switch contact can be configured as time or switch contact. For operating, a TowiTek input unit must be connected to the Wiegand-interface. For using the radio hand-held transmitters the radio receiving unit Order No. 19 12 40 and the hand-held transmitter Order No. 19 12 27 are used. For using the RFID-transponders the RFID-Wide-area reading antenna Order No. 19 15 27 is used. The simultaneous connection of several input units, such as radio and RFID in parallel is also possible. The access controller is delivered as a finished product mounted in the TowiTek universal casing.
Compact component for an independent access control system with RFID-transponders as proof of authority. The system learns up to 50 identifications and can be controlled in a simpe way via a programming card. The switch contact can be configured to change or time function. The transponders used are copy-protected and offer a much higher security than similar systems. The reading range is around 20 &ndash 50 mm.
Switching power supply as a finished product and checked with stabilized 12 V output. The board is intended for integration in the TowiTek universal casing Order No. 19 12 92. The switching power supply has a very low power intake in operation without or with low load at the output, because of which the operating costs are very low in continuous operation.
The TowiTek active RFID-antenna with serial data output identifies and reads TowiTek transponders as well as transponders according to EM410x compatible industry standard. The data output is done serially with TTL-gauge and 9600 bps (8N1) and can thus easily be evaluated by the other processor systems, such as the C-Control or other micro-controller systems. Ideal for all, who want to develop RFID-applications themselves and want for this a reliable and economical reading electronics.
When the supplied transponder key ring is held in front of the module (distance of 3 - 6 mm), the relay switches on. Application: Touch-free door opener, for switching devices, etc. This key doesn&rsquo t need any batteries! All keys lock simultaneously (not separately programmable to on and off).
With the TowiTek RFID-Servo control module the simple mechatronic locking systems with transponder can be implemented as access medium. Any modelling RC-Servo can be connected with pulse-width control, in order to initiate a locking whenever an authorized transponder is identified. The start and the end point of the Servo-movement as well as the residence time can be programmed freely, which permits a very general application of the control. Despite a permanent transponder identification at the antenna the control needs only a minimum standby current of less than 0.008 mA, so that it can be operated with a battery set over several years. Since no special activation of the antenna is necessary, it can also be placed completely invisible behind a non-metallic cover (wood, glass, plastic). The control can learn up to 45 valid transponders. The component is intended for integration in the TowiTek Universal Casing Order-No.: 19 12 92.
Reading antenna for passive 125 kHz RFID-transponder with a high reading range. Depending upon the design, the transponders can read in a distance of up to 50 cm. Compatible with TowiTek transponders and many other ROM-transponders. Signal display for transponder recognition with LED. With Wiegand and RS-485 interfaces. Suitable for connection to the TowiTek Universal access controller UAC400 Order-No: 19 15 80.
The TowiTek active radio receiver receives and decodes the data from the TowiTek 4-channel hand-held transmitters Order-No. 19 12 27 and displays the serial number of the hand-held transmitter and the key code via the Wiegand- and the RS-485 interfaces. The receiving unit is designed for use with the universal access controller UAC400 Order-No. 19 15 80, but can also be used for external systems (e.g. C-Control or other micro-controller systems) thanks to the additional RS-485. The receiving unit is cast waterproof and can be mounted also in the open for an optimum receiving range.