Conrad | Components Automation Drive technology Stepper motor controls

Price: £ - £

Sort By

Show

Components > Automation > Drive technology > Stepper motor controls

Available

PC Stepper Motor Card

This card provides 3-axis
stepper motor control.
The adjustment of the
phase current and
flexible external power
supply of the power stage
make it easy to use this
board with a range of
motor types. The supplied
driver software (source
code) makes it easy to
put your ideas (e.g.
robot or plotter control)
into practice. Centronics
connection for standard
printer cables &
- Current chopper power
stage for full and half
step operation &
- For use with a range of
2 and 4 phase stepper
motors

Availability: In Stock

£56.95

Available

Stepper Motor Contr. ISMIF-USB

The intelligent stepper
motor iSMIF USB interface
is used to connect the
stepper motor control
cards SMC800 / SMC1500 to
the PC, as well as the
commercially available
stepper motor control
amplifiers via the serial
USB interface. The
interface includes a
microcontroller, which
directly generates the
drive signals for the
stepper motor control
cards SMC800 / SMC1500,
however can also generate
clock and direction
signals for standard
stepper motor amplifiers
The stepper motor
interface is designed so
that it can be programmed
using simple control
commands. The control
commands can be executed
directly, however are
also stored in the
read-only memory It can
store up to 7 programs in
read-only memory. The
program flow can be
controlled with the start
- stop - pause - inputs.

Availability: In Stock

£124.95

Available

Stepper Motor Contr. ISMIF

The intelligent stepper
motor interface iSMIF
allows the SMC-800 and
SMC-1500 stepper motor
control cards to be
connected to the PC, as
well as control of
proprietary stepper motor
end stages through the
serial RS232 interface.
This interface contains a
microcontroller with
driver software which
directly generates the
control signals for the
SMC-800/SMC-1500 control
cards, but can also
produce the stroke and
direction signals for
standard stepper motor
end stages. This allows
any stepper motor control
card to be driven
independently of the PC
operating system or PC
software used. The
stepper motor interface
is designed so that it
can be programmed using
simple control commands.
These commands are saved
in the 64 kB data storage
and processed
sequentially. This means
that a software driver is
no longer needed, the
programming is thereby
carried out independently
of the development
environment. &
- Ideal for driving any
stepper motor control
card

Availability: In Stock

£155.00

Available

SMC1500 Stepper Motor Control
Card

This plug-in card enables
3-axis control of stepper
motors. Adjustable phase
currents and a variable
external current supply
to the output stages
ensure easy adaptation to
many different motors. By
using the supplied
software drivers (source
code), you can very
quickly implement your
own ideas, for instance
a robot or plotter
control system.
Centronics connection for
standard printer cable &
- Current chopper output
stage for full and
half-step operation &
- Connection for various
types of 2- or -4 phase
stepper motors.

Availability: In Stock

£124.45

Available

BLDC CONTROLLER/DRIVER 20A 48V

Unit of control and
output for three-phase
BLDC motors Detection of
position via external
incremental Encoder (ABN)
Programming via Trinamic
Motion Control Language
(TMCL) Operation in Host
and Standalone mode
(analogue or TMCL)
Interface: RS232, RS485,
CAN, clock/direction
(S/D). 4 programmable
inputs (analogue/digital)
2 programmable digital
outputs (up to 50 V/2 A)
Cooling is not necessary
Over-current &
over-temperature-protection
Connection via pluggable
screw-connector strip
Aluminium casing
With the optionally
available USB-X V2
interface transducer BN:
198813 signals can be
converted from USB to
CAN, RS485, IIC, LIN
and SPI.

Availability: In Stock

£369.62

Available

TMCM-078 1-AXLE DRIVER 7A/75V

Control: Clock and
direction
(step/direction),
opto-decoupled 5 - 24V.
Parameterization via
serial port (RS-485 with
ASCII protocol) Automatic
reference move Up to
256stel µ -Stepping
(adjustable) Dynamic
current feed / Standby
reduction Inputs for
reference and end switch
2 Multifunction I/Os.
Trinamic driver
technology: radiator is
not necessary Stall
Guard&trade: Sensor-free
load-angle measurement
and monitoring of
blockage Connection via
screw/plug connector

Availability: In Stock

£357.12

Available

Idx 7505 Stepper Motor Power
Driver

The TMC IDX 7505 is a
very small power end
stage for stepper motors
with phase currents of up
to 7 A (peak) or 5 A
(RMS). Control is through
stroke and direction
signals (opto-decoupled 5
- 24 V). In order to
prevent unnecessary
overheating of the motor,
a dynamic current
matching facility with
standby current reduction
is used to provide the
motor with only as much
current as is necessary.
Parameterisation of the
IDX 7505 is performed
over the RS-485 interface
with an ASCII protocol
(on a PC for instance
with "Hyperterminal").
Simple drive commands and
automatic reference
journeys can also be
started over the
interface.

Availability: In Stock

£240.04

Available

BLDC CONTROLLER/DRIVER, 5A,
40V, RS232

Unit of control and power
amplifiers for
three-phase BLDC motors.
Operation in the host and
stand-alone mode
(analog). Block
commutation with Hall
sensors. Serial
interfaces: RS232 or
RS485 depending on
execution Inputs for
reference and limit
switches. Analog and
digital I / Os to the
classic controller. No
refrigeration necessary.
Overcurrent and
overtemperature
protection Header-Stecker
connection The optional
base board 160 (Order No.
19 75 87) provides easy
access to all important
signals of the TMCM-160
(Ad-Hoc Evaluation /
production). With the
USB-V2-X interface
converter BN: 198, 813
signals can be converted
from USB to CAN, RS485,
IIC, LIN and SPI

Availability: In Stock

£75.00

Available

STEP MOTOR SYSTEM SMCFLEX BASE

Basic module for a
variety of expansion
options. Thus the Motor
Driver Amplifiers
SMCflex-ME can be plugged
into different power
classes In addition, the
user has the option to
serially address with the
microcontroller unit
SMCflex-EMCU. The input /
output module SMCflex I /
O facilitates the
bringing of input signals
and the identification of
the output signals. To
run, just an operating
voltage required

Availability: In Stock

£44.60

Available

BLDC CONTROLLER/DRIVER, 5A,
40V, RS485

Unit of control and
output for three-phase
BLDC motors Operation in
Host and Standalone mode
(analogue or TMCL) Block
commutation with HALL
sensors Serial ports:
RS232 or RS485 design
Inputs for reference and
end switch Analogue and
digital I/Os for classic
control Cooling is not
necessary Over-current
&
over-temperature-protection
Connection via
header-connector The
optionally available base
board 160 BN: 197587 make
possible a simple access
to all important signals
of the TMCM-160 (Ad-Hoc
evaluation/serial
production). With the
optionally available
USB-X V2 interface
transducer BN: 198813
signals can be converted
from USB to CAN, RS485,
IIC, LIN and SPI.

Availability: In Stock

£75.00

Available

3-PHASE GATE DRIVER
TMC603-LA-X

The TMC603 is a 3-phase
BLDC-motor predriver for
6 external N-channel
MOSFETs. Control via
three PWM-signals from
micro-controller.
Integrated current
measurement possible via
MOSFETs without measuring
resistor. Automatic
"Break-Before-Make" logic
for a safe control.
Integrated 5 V and 12 V
voltage regulator.
Patented simulation of
hall-sensor signals from
the Back-EMF (hallFX).
Edge steepness can be
set, hence no external
filter is needed. Safety
and diagnostic functions.

Availability: In Stock

£10.62

Home
Contributors
International Sites
- United Kingdom
- France
- Germany
- Netherlands
- Denmark
- Sweden
- Italy
- Spain
Account
Information

Filters

Contact Us

Information

My Account