Conrad | Components Active Components Cable Mounting Programming Devices / Tools / Evaluation

Price: £ - £

Sort By

Show

Components > Active Components > Cable Mounting > Programming Devices / Tools / Evaluation

Available

Galep-5 Usb-programmer

Zero-compromise universal
programmer with 48 pins
for development, service
and mobile use with USB
2.0 connection. GALEP-5
is an extremely fast
pocket-sized universal
programmer. It is used
mainly in development,
service and the unique
opportunity offered by
mobile component
programming. Thanks to
its short programming
times, GALEP-5 can
however also be used in
production. GALEP-5 is a
real universal talent and
a professional
programming device
available for an
incredibly low price.
High-speed programming:
The programming
algorithms run on an
internal 200 MIPS ARM-9
processor under Embedded
Linux. The processor uses
an FPGA to directly
control the pin driver
and thereby ensure
optimum adaptation of the
components to the
programming algorithms.
Programming times are
similar to the shortest
possible times for the
components. The internal
64 MB RAM even saves all
the data for larger
components in the device.
During multiple
programming, the data
only has to be
transferred once.
48 universal pin driver:
A pin driver chip
developed for the GALEP
series ensures optimum
signal quality for the
component awaiting
programming. The
following signals are
provided at each of the
48 pins: Logic output:
high level of 1.3 V to
5.0 V can be set. Logic
input: switching
threshold of 0.5 to 5.0 V
can be set. Three
independent programming
voltages of up to 25 V,
ground. 3 different
switchable loads each for
pullup and pulldown.
Adjustable cycle rates.
GALEP-5 supports:
"in-system programming"
and JTAG.
Operation without power
adapter: GALEP-5 is
supplied with all its
power requirements by the
PC's USB port. Neither
batteries nor a power
adapter are usually
needed. Safety: Power
consumption, the right
position and the
contacting of all pins on
the component are
automatically checked
before any action. The
possibility of destroying
a component or device
through incorrect
operations is therefore
virtually
elimina...

Availability: In Stock

£483.45

Available

GALEP-4 Universal Programmer

GALEP-IV is a
pocket-sized professional
universal programming
device. And independently
developed ASIC pin driver
offers a numerous range
of options that are
normally only found on
expensive
top-of-the-range devices:
GALEP can program EPROMs,
EEPROMs, Flash-EPROMs,
serial EEPROMs,
microcontrollers, GALs
and PALCEs without the
need for additional
adapters or expansion
boards. Low-voltage
modules up to 1.3 V are
supported. GALEP is not
much larger than a
computer mouse (115 x 80
x 33 mm). If you need to
operate the device
without a power supply,
you can use batteries to
run it for up to 8 hours,
making the device
extremely portable. It is
simply connected to the
printer port on a PC or
laptop computer. In
addition to basic
functions such as
reading, programming,
synchronizing and
deleting, the software
provides user-friendly
configuration options for
the special functions of
the selected module. The
Editor program provides a
number of options for
editing the code in the
module, which can be
loaded or saved in
binary, Intel hex,
Motorola-S or Jedec file
formats. The power
consumption and correct
position of the component
is tested before each
action. This makes it
almost impossible to
damage a component or the
device through misuse.
COM objects also allow
GALEP to be controlled by
your own programs, e.g.
those written in Visual
Basic. New components can
be downloaded into the
application for free,
ensuring that GALEP is
kept up-to-date for the
years to come. GALEP's
unparalled flexibility is
made possible because of
the special hardware it
uses. All pins on the
40-pin programming socket
are equal and provide
three seperately
configurable voltages up
to 25 V, ground, clock,
configurable pull-up /
pull-down resistors as
well as logic on-outputs
with bidirectional level
shifters for low-voltage
modules. The internal
logic of GALEP is freely
programmable using a
highly integrated FPGA
and is optimized for each
selected module. This
allows all components to
be programmed o...

Availability: In Stock

£296.45

Available

USB-ph

The programmer is
compatible with Infinity
USB/Phoenix/Smartmouse/AVR-SPIprog/PIC-JDMprog
and has 5 operating
modes: USB for extremely
fast programming of all
chip cards with PIC and
ATMEL microcontrollers.
Phoenix for programming
forgery-proof chip cards
(Titanium, OPOScard,
Platinum, Knotcard
etc.). Smartmouse for GSM
cards for mobile phones.
PIC-JDM and AVR-SPI for
compatibility with the
freeware frequently based
on serial interfaces. The
two interfaces, SIM
reading devices and
programming modes make
the CAR-07 a very
versatile programmer. The
software provided with
the CAR-07 allows for
automatic detection of
the chip card inserted
and editing of its
processor register. The
voltage supply is
provided by the USB port.

Availability: In Stock

£81.45

Available

SMARTCARD-PROGRAMMER CAR-06

CAR-06 is a
USB-Smartcard-Programmer
with extraordinary card
recognition functions. On
the basis of the USB-port
and with a fast processor
it supports all the
common Smartcards and
enables a high-quality
programming. The
connection with the PC is
made via the
USB-interface (USB 1.1
and USB 2.0 - thus safe
for the future and also
suitable for Notebooks).
The voltage supply is
also done from there. If
the Programmer is not
working, a changeover is
made automatically to
standby - only 0.06 Watt
consumption!

Availability: In Stock

£59.95

Available

UNIVERSAL-PROGRAMMING DEVICE
GALEP-5D

The GALEP-5D-60 is a
high-end programming
device for production and
development. Its modular
concept, its USB and
network-connection and
its
"standalone"-capability
make it a modular concept
for all programming tasks
in laboratory and
production. The
programming device of the
size of a briefcase
weighs only 750 g.
GALEP-5D has been trimmed
without any compromise on
speed. For programming
and communication there
is an internal 200 MIPS
ARM-9 RISC-processor
under Linux, which
controls the 60
pin-driver via an FPGA.
The FPGA (freely
programmable logic)
contains pulse generator,
buffer storage and state
machines for hardware
acceleration of the
programme algorithms. In
this way time-critical
components can be
programmed in a speed,
which could not be
achieved by software
alone. The Ethernet-port
permits a data transfer
theoretically at up to
100 MB/s. The internal
128 MB RAM stores the
data even for larger
components in the device
the data needs to be
transmitted only once
even in case of multiple
programming. An in-house
developed pin-driver chip
guarantees the optimum
signal quality for the
component to be
programmed, permits the
small dimensions (L x B x
H 172 x 118 x 22 mm) and
the low power
consumption.

Availability: In Stock

£1069.81

Available