PRO 70 Miniature Condenser Microphone

Product Description

The Audio Technica PRO 70 miniature condenser microphone achieves full-sounding pickup & is known for outstanding consistency & dependable performance. Supplied with both a clothing clip & guitar mount, it provides natural & articulate vocal reproduction when used as a clip-on lavalier & excels in pickup of acoustic guitar. The PRO 70 is designed to make music & speech clearly & comfortably audible, yet never draw attention to itself or its operation. The microphone is equipped with a low-frequency roll-off switch that allows for reduced pickup of room noise. The versatile PRO 70 may be powered by either battery or phantom power. Its cardioid polar pattern reduces pickup of sounds from the sides & rear, improving isolation of the desired sound source. Audio Technica PRO 70

Features: Miniature condenser microphone is ideal for both vocal & acoustic guitar applications Natural & articulate vocal reproduction when used as a clip-on lavalier—clothing clip included Excels in pickup of acoustic guitar with included instrument adapter Cardioid polar pattern reduces pickup of sounds from the sides & rear, improving isolation of desired sound source Switchable low-frequency roll-off Corrosion-resistant contacts from gold-plated XLRM-type connector Operates on battery or phantom power 1.8 m cable permanently attached between microphone & power module Audio Technica PRO 70 Specifications: Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 100-14, 000 Hz Low Frequency Roll-Off: 80 Hz, 8 d B/octave Open Circuit Sensitivity: Phantom: -45 d B (5.6 m V) re 1V at 1 Pa, Battery: -45 d B (5.6 m V) re 1V at 1 Pa Impedance: Phantom: 200 ohms, Battery: 200 ohms Maximum Input Sound Level: Phantom: 123 d B SPL, 1 k Hz at 1% T.H.D., Battery: 123 d B SPL, 1 k Hz at 1% T.H.D. Dynamic Range (typical): Phantom: 96 d B, 1 k Hz at Max SPL Battery: 96 d B, 1 k Hz at Max SPL Signal-To-Noise Ratio: 67 d B, 1 k Hz at 1 Pa Phantom Power Requirements: 11-52V DC, 2 m A typical Battery Type: 1.5V AA/UM3 Battery Current/ Life: 0.4 m A / 1200 hours typical (alkaline) Switch: Off, on-flat, on-roll-off Weight: (MICROPHONE) 0.3 oz (8 g), (POWER MODULE) 4.7 oz (134 g) Dimensions: (MICROPHONE) 0.98 inches (25.0 mm) long, 0.40 inches (10.2 mm) diameter, (POWER MODULE) 3.27 inches (83.0 mm) H x 2.48 inches (63.0 mm) W x 0.87 inches (22.0 mm) D Output Connector: Integral 3-pin XLRM-type Cable: Integral 6 ft (1.8 m), permanently attached between microphone & power module Accessories Furnished: AT8411 clothing clip; AT8444 instrument adapter; power module; windscreen; battery; soft protective pouch