United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Video/Audio/Microphone Blimps & Windscreens
Available
-
This Sennheiser Foam
Windshield replaces the
windshield included with
the MKE400 shotgun
microphone.
Availability: In Stock
£10.25
Available
-
Rode DeadCat VMPR
Artificial Fur Wind
Shield The DeadCat VMPR
is a furry wind cover for
the VideoMic Pro,
designed for use in windy
environments. Its
artificial fur is
specially designed so as
to minimise wind noise
while remaining
acoustically transparent.
The DeadCat VMPR is
compatible with the
VideoMic Pro featuring
Rycote Lyre shockmounting
(after May 2015).
Availability: In Stock
£25.99
Available
-
Professional Accessory
Set, includes hairy
cover and 3.5 mm jack
socket to XLR adapter.
Suitable for MKE 400
microphone.
Availability: In Stock
£30.00
Available
-
Softie Windshield A
robust and proctical
windhsield (70mm in
diametre) performing as
well as a standard
windshield (without
windjammer) The softie
alone provides a fast,
flexible and cost
effective solution for
ENG on camera
microphones. Constructed
of an acoustic foam base
covered by a specially
designed synthetic fur
fabri together with a
seperate shockmount with
it's own bracket and
either pistol grip handle
or boom adapter. 30mm
long fur, giving
protection up to 25db
wind noise reduction.
Available in a large
range of sizes to fit
most popular microphones.
The main component of the
Softie mount is a one
piece rubber (actual
material: EPDM) diaphragm
shockmount. This unit is
extremely robust, and
has been tested in all
environment conditions to
ensure it performs. The
Softie Mount comes in
three sizes, depending
on which microphone being
used. Small Hole 19-20mm
diameter Medium Hole
21-22mm diameter Large
Hole 24-25mm diameter The
mounts are 58mm diameter
x 56mm long, and support
short to medium length
shotgun microphones.
Please use the "Quick
Product Finder" to see
what size you need for
your mic. The Softie
mount will only fit
shotgun microphones,
which are cylindrical in
shape (the same diameter
though their whole
length). We can not mount
microphones that taper,
with the Softie mount.
The longest Softie
Windshields we make have
an internal bore of 32cm
(12-1/2") - Example:AKG
CK68 or Audio Technica
AT815b. These are the
longest microphones we
would recomend using a
Softie Mount for, simply
because the mount is
flexible & can not
support longer mics. For
longer mics, we would
only recomend a Full
Windshield System, and a
Modular suspension. The
Softie Mount, used with
the Softie Windshield
provides a fast,
flexible and cost
effective solution for
ENG on camera microphones
This system will allow
the user to either hold
the mount with the pistol
grip handle. Or attach it
to a boom pole using the
3/8" Whitworth threaded
insert in the base of the
handle. This gives a very
robust mounting system,
which will be suitable
for most situations.
Availability: In Stock
£142.80
Available
-
The Reporter Mic Foam is
a discreet, slip-on foam
windshield, designed to
protect the microphone
head against light wind
and pop noise. Made of
durable, high quality
open-cell acoustic foam,
these windshields offer
up to 20 dB wind noise
attenuation, whilst
keeping high frequency
loss to a minimum.
Engineered exclusively
for Rycote, this high
quality foam also
provides excellent
resistance against the
damaging effects of
moisture and UV light.
Additionally, you can
now also benefit from a
further 12 dB wind noise
attenuation with Rycote's
Foam Windjammers,
specifically designed to
accomodate our range of
Mic Foam windshields. Up
to 20 dB wind and pop
noise attenuation with
minimal high-frequency
loss from this discreet,
slip-on windshield
Excellent resistance to
moisture and UV light
from the durable, high
quality open-cell
acoustic foam
Availability: In Stock
£7.56
Available
-
The Reporter Mic Foam is
a discreet, slip-on foam
windshield, designed to
protect the microphone
head against light wind
and pop noise. Made of
durable, high quality
open-cell acoustic foam,
these windshields offer
up to 20 dB wind noise
attenuation, whilst
keeping high frequency
loss to a minimum.
Engineered exclusively
for Rycote, this high
quality foam also
provides excellent
resistance against the
damaging effects of
moisture and UV light.
Additionally, you can
now also benefit from a
further 12 dB wind noise
attenuation with Rycote's
Foam Windjammers,
specifically designed to
accomodate our range of
Mic Foam windshields. Up
to 20 dB wind and pop
noise attenuation with
minimal high-frequency
loss from this discreet,
slip-on windshield
Excellent resistance to
moisture and UV light
from the durable, high
quality open-cell
acoustic foam
Availability: In Stock
£8.88
Available
-
Azden’s
high-performance Softie
Windshields work with a
variety of Azden
microphones to provide a
whole new level of wind
noise reduction over the
standard foam windscreens
typically used with
shotgun microphones. Wind
noise is effectively
reduced by up to 20db,
whilst maintaining the
microphone's frequency
response.
Availability: In Stock
£70.00
Available
-
Azden’s
high-performance Softie
Windshields work with a
variety of Azden
microphones to provide a
whole new level of wind
noise reduction over the
standard foam windscreens
typically used with
shotgun microphones. Wind
noise is effectively
reduced by up to 20db,
whilst maintaining the
microphone's frequency
response.
Availability: In Stock
£70.00
Available
-
The RØDE WS6 Deluxe
Windshield is an easy to
use high-performance
windshield for shotgun
microphones. Designed to
reduce wind noise when
recording in adverse
environmental conditions,
the WS6 combines an
open-cell foam surround
with an outer layer of
acoustically transparent
artificial fur. A rubber
base prevents any wind
noise from entering the
rear of the microphone
pickup area. Suitable for
the RØDE NTG1 and NTG2,
as well as any shotgun
microphone with a maximum
slot length of 160.5mm (6
1/4") and a diameter of
21-22.5mm.
Availability: In Stock
£45.00
Available
-
Sennheiser MMD 835-1 BK
Microphone Capsule
Microphone module of the
well known evolution 800
series with powerful
sound and universal
application. Compatible
to all handheld
transmitters of series
ewG3 and 2000.
Availability: In Stock
£130.00
Available
-
The MINIFUR-LAV is a
synthetic fur cover for
the Lavalier microphone,
designed for use in
outdoor or high-wind
conditions. The
MINIFUR-LAV is supplied
in a pack of three.
Availability: In Stock
£11.00
Available
-
The DeadCat GO is a furry
wind cover for the
VideoMic GO, designed
for use in windy
environments. Its
artificial fur is
specially designed so as
to minimise wind noise
while remaining
acoustically transparent.
Availability: In Stock
£17.54
Available
-
Rycote Softies provide
optimum wind diffusion
and noise rejection while
remaining cost effective.
This softie features a
standard size hole and
measures 12cm (4.72") in
length. The softie will
fit microphones with
diameters from 19 - 22mm
(0.74 - 0.87").
Availability: In Stock
£70.80
Available
-
Compatible microphones:
NTG-1, NTG-2, NTG-3,
VideoMic The Dead Cat
windshield is designed
for minimising any wind
noise when recording in
high wind conditions. Its
artificial fur is
specially designed so as
to minimise wind noise
while remaining
acoustically transparent.
Availability: In Stock
£29.00
Available
-
The Dead Kitten
windshield is designed
for minimising any wind
noise when using the
Stereo VideoMic or NT4
(with WS4 windshield) in
high wind conditions. Its
artificial fur is
specially designed so as
to minimise wind noise
while remaining
acoustically transparent.
Compatible microphones:
Stereo VideoMic, NT4
Availability: In Stock
£19.99
Available
-
Rode Blimp 2 Rycote
Windshield/Shockmount The
RØDE Blimp 2 is a
complete windshield and
shock mounting accessory
for the NTG1, NTG2,
NTG3, NTG4 and NTG4+
microphones, as well as
any third party shotgun
microphone up to 325mm
(12 ¾”) in length. Now
featuring the Rycote®
Lyre suspension system,
the Blimp 2 provides the
ultimate in microphone
suspension and isolation.
Constructed from a single
piece of hard-wearing
thermoplastic, the Lyre
provides superior
acoustic suspension to
traditional elastic
solutions, and will
never wear out, sag or
snap. Quick facts:
•Greatly reduces
handling and wind noise
•Accommodates most
shotgun microphones 325mm
in length and 19-22mm
diameter •Rycote Lyre
suspension system onboard
with internal spacing
guide •Lightweight
skeleton handle with
3/8” thread mount
•Mogami cable with
Neutrik and Switchcraft
XLR connectors •Dead
Wombat windshield
included •10 year
warranty (no registration
required) The Blimp’s
handle has also been
completely redesigned,
reducing the product
weight significantly,
while increasing the
ergonomics for handheld
use. Housed inside the
grip is a heavy-duty
Mogami cable which splits
via a junction box to a
highly-flexible thin
cable inside the Blimp,
to minimise the
transference of vibration
to the microphone. With
the lightweight design of
the handle and suspension
system the new Blimp
design is over 25%
lighter (550gm without
microphone or DeadWombat
fitted). The Blimp
attaches to any standard
boompole via 3/8" thread
attachment at the base.
The Universal Blimp Mount
is available as an option
to remove the handle when
the Blimp is being used
primarily on a boompole
to reduce weight. The
Dead Wombat windshield,
caring brush and
tail/patch cable are
included. The added
confidence of a full ten
year warranty* ensures
that the Blimp is by far
the best microphone
windshield system
available, further
evidenced by a 2009 Red
Dot Award and Australian
International Design
Award for outstanding
product design. *Excludes
normal wear and tear of
Dead Wombat furry cover
or any misuse,
modification or improper
storage and
transportation of the
product.
Availability: In Stock
£209.00
Available
-
The DeadCat VMP is a
furry wind cover for the
VideoMic Pro, designed
for use in windy
environments. Its
artificial fur is
specially designed so as
to minimise wind noise
while remaining
acoustically transparent.
Availability: In Stock
£29.00
Available
-
Sony replacement foam
microphone windshield for
DSR series camera
microphones ECM-NV1
Availability: In Stock
£70.76
Denmark