United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Studio & Lighting/Studio Supplies & Accessories/Light Meters & Accessories
Available
-
Sekonic redesigned the
popular L-308BII to
accommodate the demand
for an affordable,
lightweight,
digital-ready light
meter. The new L-308S
offers the latest in
component technology and
precise calibration for
accurate digital
exposures. Software
enhancements now offer
the photographer a choice
of Full, 1/2 or 1/3
f/stop increments to
compliment digital camera
displays. With 1/10th of
an f/stop measurement and
display, accurate and
consistent exposures are
a snap for D-SLRs or
point-and-shoot digital
cameras. The LCD panel
has also been improved
for better readability. A
constant display of
information such as ISO,
measuring modes and
selected settings have
been redesigned similar
to the very popular
Sekonic L-358
FlashMaster. Features:
Full, 1/2 and 1/3
selectable f/stop
increments 1/10th of a
stop increment displayed
Improved LCD display
Increased consistency
Enhanced icons and
symbols for better
readability
Availability: In Stock
£179.00
Available
-
The versatility of
today's cameras is
expanding at an amazing
rate. Digital SLR cameras
are being used to record
moving images and digital
video cameras used to
capture still frames for
printing. Whether you are
a DSLR videographer,
cinematographer, still
photographer or involved
in any facet of image
capture, the Sekonic
L-308DC is the perfect
meter for you. Three ways
to Meter HD Cine Mode:
Perfect for todays DSLR
videographers. Make
exposure readings and
control light, using
shutter speeds and frame
rates and get aperture
settings with one-tenth
stop accuracy. Cine Mode:
Designed for digital
cinematography. Select
from the most useful
frame rates and shutter
angles for exposure
control with one-tenth
stop accuracy. Lux and
foot-candle readout
enables quick set up of
lights. Photo Mode: Full
control for traditional
still image
photographers.
Shutter-priority display
of a full range of
ambient and flash
functions including Cord
and Cordless flash
measurement as well as
ambient EV measurement.
Three Ways to Measure
Light The Lumisphere
provides incident light
readings for nearly
foolproof exposure
readings and enables
lighting that scene
before talent arrives The
Lumidisc is perfect for
lighting green screens,
adjusting ratios and
taking lux and
foot-candle measurements
Reflected light readings
enable measuring the
brightness of subject
tones, gray cards,
light sources or window
light. Calibration
Compensation Adjust the
L-308DC to film or
digital camera sensors or
matching the L-308DC to
other handheld meters
Custom Setting Three
custom settings tune
meter operations and
displays to fit your
camera and metering
requirements Illuminance
Measurement Lux (lx) and
foot-candle (fc) display
is especially used for
cinematography,
theatrical and other
applications that require
precise control of light
source brightness. Either
no display, lux or
foot-candle is selectable
in custom setting.
Availability: In Stock
£275.00
Available
-
The Sekonic L-208 is the
smallest light meter to
combine incident and
reflected light
measurement, and has
been carefully designed
to provide simple, one
handed operation. The
printed digits are large
and have been colour
coded for easy
recognition of all
readings. The L-208 also
features a convenient
accessory mounting shoe
to attach the meter to
the accessory flash shoe
of many cameras, making
the meter accessible and
handily positioned for
metering most subjects
from the camera position.
Included with the Sekonic
L-208 are a strap,
carrying case and
battery.
Availability: In Stock
£99.00
Available
-
Sekonic C-700R
Spectromaster Colour
Meter The Sekonic
SpectroMaster C-700R is
designed for motion and
still image capturers who
must produce quality
results with proper
subject color while
working with multiple
types and brands of light
sources. A full-spectrum
color meter, the C-700R
can precisely measure
LED, HMI, Fluorescent
sources, new-style
plasma lamps as well as
tungsten lamps, natural
light and electronic
flash. Its
high-resolution measuring
system, featuring CMOS
sensor, capture and
displays spikes in light
source output to provide
unsurpassed color
measurement accuracy. The
C-700'Rs large, color
touch screen displays
light-source information
as a color spectrum graph
that is expandable for
closer inspection, CRI
(Ra plus R1 to R15),
Kelvin (correlated color
temperature),
Illuminance (footcandle
or Lux) and light source
filtration values in
Mired, CC index as well
as filter correction
values for major light
source and lens filter
brands. Its “Multi
Lights” display enables
quick data comparison of
four lights with full
data on each at the touch
of a finger. Its “Multi
Spectrum” mode enables
displaying spectral
graphs of three sources
for quick visual
comparison.
Availability: In Stock
£1499.00
Available
-
KENKO KFM-1100 light
meter, an easy-to-use,
accurate, full-featured
hand-held light meter for
reading both ambient and
flash light. For most
people the minimal,
clearly marked buttons
will make using the meter
second nature in very
little time. The side of
the meter only has 3
buttons, the largest is
for taking measurements,
the other two set on a
rocker are UP/DOWN input
buttons for changing F
no., shutter speed or
ASA/ISO. This simple,
easy-to-use ergonomic
design feels comfortable
in your hand and its
logical control layout
will please photographers
who want to concentrate
on the subject, not
their equipment. Large,
easy to read LCD_displays
measurements in F no.
format with large numbers
in 1/10 stop increments
and in more common 1/2
stop increments in a
pointer scale across the
top of the LCD display.
LCD also has a back-light
for easy reading in low
light situations. The
meter is sensitive enough
for ambient (existing)
light to be measured for
a shutter speed range
from 30 minutes to 1/8000
of a second. In Cine mode
it can be used to read
frame-rates of 8 to 128
frames/sec. For measuring
flash, the meter has
modes to either trigger
the flash using a
sync-cord or set to
non-sync cord for manual
flash triggering. The
aperture range that can
be displayed is from
f/1.0 to f/128. Useful in
mixed flash/ambient
lighting situations, the
“Analyze” function
can determine the ratio
of ambient to flash light
in a scene. This feature
is very handy in scenes
where a flash is being
used to “open up” a
shadowed area left by
ambient (natural) light.
The meters
“Calculation”
function can be used to
average measurements that
have been stored in
memory, very useful in
reflected light
measurements to capture
highlight or shadow
detail more accurately.
The KFM-1100 has two
memory “slots” to
store previous
measurements that can be
recalled for reference or
for averaging. Just press
the “M” button after
each reading to store it
in memory. If the memory
has two readings stored,
it will delete the oldest
reading to store the
current information.
Availability: In Stock
£284.87
Available
-
Replace your damaged or
missing lumidisc for
Sekonic L-308 Flashmate
Meter.
Availability: In Stock
£11.00
Available
-
Sekonic Exposure Profile
Target 1 Version 2.0 and
later of the Digital
Transfer Software is
designed to be used with
Exposure Profile Targets
that have alignment
marks. The alignment
marks simplify and
automate the selection of
Profile Target images
with the DTS software. If
you own a Profile Target
I and do not have the
alignment marks, please
request directly from
Sekonic USA by calling
the Service Department at
914-347-3300. If you live
outside the USA, contact
your country's
distributor. To profile
your camera and lens
combinations, the
Exposure Profile Target I
is fully compatible with
FREE Data Transfer
Software along with the
L-758D, L-758DR,
L-758Cine, L-478D, and
L-478DR light meters. The
result is total exposure
accuracy. Features
exposure target on front,
and gray card on back
for custom white balance
of D-SLRs.
Availability: In Stock
£125.00
Available
-
The Sekonic RT-32CTL
Radio Transmitter Module
plugs into a compartment
in the body of the
Sekonic Flash Master
L-358 meter, allowing it
to trigger flash units
from the meter for
readings. With the
RT-32CTL you can forget
about sync wires or
waiting for your
assistant to trip the
flash while you're in
cordless mode. It's a
great time-saver for solo
photographers who can
take an incident reading
from the subject or a
reflected reading from
the camera position. The
RT-32CTL has a 100' range
and is compatible with
PocketWizard radio
triggering systems, as
well as the PocketWizard
Wireless Freedom partners
(Photogenic, Norman,
Lumedyne, Dyna-Lite and
Profoto) with built-in
PocketWizard radio
technology.
Availability: In Stock
£150.00
Available
-
The Sekonic NP Finder 1
Degree has been designed
specifically for the
Sekonic L-358 Lightmeter.
This non-parallax spot
viewfinder with a
measuring angle of 1º
provides a measurement
range (for reflected
light) from EV5 to EV24.4
for ambient light, and
from f/8.0 to f/90.9 for
flash. A 5º and a 10º
finder are also
available.
Availability: In Stock
£256.00
Available
-
Kenko Colour Meter
KCM-3100 Knowing the
colour temperature of a
light source is extremely
important for
consistently accurate
colour reproduction in
photography. Reproducing
accurate colour is
critical in many areas of
photography such as
fashion and commercial
photography. Useful for
both still and cine
photography, the
KCM-3100‘s uncluttered
control button layout and
large easy-to-read LCD
makes it very user
friendly. Three display
modes display colour
temperatures, designed
for different types of
photography and filtering
systems. LB (Light
Balancing) LB index is
used to select the
necessary amber or blue
LB filter. The Mired
difference between the
specific photographic
colour temperature for
the selected film type
and the light source. CC
(Colour-Correction)
displays the Kodak filter
number(s) of the
necessary light-balancing
filter(s) to make for
easy selection of the
required light balancing
filter. Where as the LB
system uses Amber or blue
filters, the CC system
uses Magenta or Green
colour compensating
filters. Photographic
colour temperature in
degrees Kelvin. This is a
useful setting to
determine filtration
based on the light source
and the spectral
sensitivity of the film
used. The ability to take
ambient and flash light
readings using either a
sync cord or non-cord.
Using a sync cord, the
flash is fired when the
reading button is pushed.
In the non sync cord
mode, pushing the
reading button puts the
meter in a stand-by mode
and when the flash is
fired the meter displays
those readings.
“Analyser Mode” for
measurement of flash
lighting only. Setting
the shutter speed to
“F”, the meter will
only read light from
flash. 9 memory channels
for customizing the meter
to your equipment and
materials- All film and
equipment manufacturers
claim that their products
are calibrated or
balanced to
“daylight” (5500K) or
tungsten (3400K or
3200K), but in the real
world these number are
often not 100% accurate.
Film can vary from batch
to batch and light bulbs
and flash tubes can have
slight shifts in colour
over time. Once these
differences are
determined, The
KCM-3100’s 9 memory
channels allow the
photographer to enter
custom setting based on
the situations or
individual film
characteristics they are
working with. Once the
data is entered and
stored, the meter will
adjust future readings
accordingly.
Availability: In Stock
£999.00
Available
-
The DFM 3 Digital
Flashmeter measures
ambient light and flash
readings with precision
digital accuracy for
perfect exposures. Its
digital LCD provides
readings in tenth of
stops while its analog
contrast display provides
readings in half stops
simultaneously. The DFM 3
is capable of incident
and reflective readings
and its unique swivel
head makes it easy to
adapt the meter to both
modes. Other features
include the ability to
take flash readings with
and without a sync cord,
storage of settings and
readings and programmable
exposure correction. The
DFM 3’s swivel head can
rotate through 180°.
This feature allows the
photographer to read the
values measured in the
display, while the
measuring head is
directed towards the
subject or light source.
Measurement modes:
incident and reflected
light Measuring flash
(with cord or without)
with indication of the
level of ambient light
Microprocessor controlled
Digital LCD display in
tenths of stops Analog
contrast display in half
stops Storage of settings
and readings Programmable
exposure correction
combinations of a given
reading Recall of all
possible shutter
speed/aperture
combinations of a given
reading Aperture or
shutter priority
pre-selection Covers the
entire CINE scale (frames
per second), including
the TV standard 25 and 30
f.p.s. Warning when range
is exceeded Automatic
battery check Auto off
Swivel head Suitable for
analog and digital
photography DFM 3 Digital
Flashmeter Protective
Case Neck Strap Battery
Manual: Click here to
read the manual for
CF0300.
Availability: In Stock
£160.00
Available
-
This is a 25 patch test
target that gathers more
information about the
camera’s exposure
characteristics than the
previous test target. It
consists of two sides; an
18% grey card used to
custom white balance
digital cameras before
profiling and on the
other, a profile target
consisting of a central
18% grey patch that is
surrounded by 24 patches
arranged in 1/6th stop
values, making it
successively brighter and
darker. The Sekonic
Exposure Profile Target
II offers faster, more
accurate testing as it
requires only three shots
to gather a wide range of
exposure data from the
camera’s imaging
system. The first shot is
made at the normal,
metered exposure
determined by a Sekonic
L-758DR. The second shot
is made at -3EV below the
metered exposure and the
third shot at +3EV above
the metered exposure. The
result is total exposure
accuracy.
Availability: In Stock
£145.00
Available
-
This set contains eleven
slides with case. When
combined with the Sekonic
L-398M Studio Deluxe,
you can get a direct
f/stop reading.
Availability: In Stock
£58.00
Available
-
Sekonic Spectromaster
C-700 Different than any
spectrometer today, the
C-700 meter not only
displays more ways to
view and compare
light-source information,
it also provides
filtration information to
correct and modify light
color for cleaner
recording and simpler
post process. The Sekonic
SpectroMaster C-700 is
designed for motion and
still image capturers who
must produce quality
results with proper
subject color while
working with multiple
types and brands of light
sources. A full-spectrum
color meter, the C-700
can precisely measure
LED, HMI, Fluorescent
sources, new-style
plasma lamps as well as
tungsten lamps, natural
light and electronic
flash. Its
high-resolution measuring
system, featuring CMOS
sensor, capture and
displays spikes in light
source output to provide
unsurpassed color
measurement accuracy. The
C-700 series
high-resolution measuring
system, featuring CMOS
sensor and linear
variable filter,
captures and displays
spikes in light source
output to provide
unsurpassed color
measurement accuracy. The
C-700 series conforms to
the requirements for
Class A of JIS C
1609-1:2006 (illuminance
meter part 1). Simply tap
the intuitive colour
touch screen to open each
of the unique measuring
and display modes to view
an amazing amount of
lighting and filtration
data. Data that you can
instantly use to select,
compare and match lights
for the best color
results. Or learn the
exact filtration
displayed in
industry-standard values
to correct lights to the
effect you want.
Availability: In Stock
£1450.00
Available
-
The Studio Deluxe III
L-398A Light Meter has
been modified from the
discontinued L-398M, so,
whilst maintaining all
of the original features,
it also has a number of
new features that will
make this a much-needed
accessory for all
photographers. It now
incorporates an amorphous
photosensor eliminating
the need for batteries.
Availability: In Stock
£175.00
Available
-
Sekonic Litemaster Pro
L-478DR-PX - Phottix
Sekonic's LITEMASTER PRO
L-478-Series meters are
the world's first
touch-screen-operated
light meters. They have
an array of unique,
must-have features for
both still and motion
story tellers. Their
compact size is both
instantly familiar and
comfortable to use. A
large LCD (2.7") displays
ambient, flash, cine
and a host of other
information in a clear
and understandable way.
Settings are made by
simply touching or
sliding a finger over the
screen. The L-478 meters
can be quickly calibrated
to your camera using
Sekonic's Data Transfer
software and either
Sekonic or X-Rite Brand
targets or by manually
inputting data to the DTS
program or on the meter
itself. Keeping pace with
wireless advancements,
the L-478DR-PX comes
complete with exclusive
Phottix wireless
triggering technology
which combines light
measurement with
triggering as selected
Channels and Groups
providing amazing control
in your hand.. The
L-478DR-PX has a radio
module and antenna built
into the meter. The
system transmits at
2.4GHz and uses Phottix
Strato II signal
protocols that can
trigger channels and
groups to fire any flash
connected to a Phottix
Strato or Strato II
receiver or Atlas II set
to receive as well as
Phottix Mitros+ and Indra
flashes set to Strato II
receive function. When
shooting, photographers
can pick from various
Phottix transmitters
including the Odin, Odin
II, Strato, Strato II,
Strato TTL, and Atlas II
set for transmit. The
L-478 series meters offer
the following languages
in the interface:
Japanese, English and
Chinese. Depending on the
country where the meter
is purchased, the
language is fixed and
cannot be changed by the
user. Please be sure to
check the radio frequency
and language before
purchase.
Availability: In Stock
£350.00
Available
-
Sekonic Litemaster Pro
L-478DR-EL - Elinchrom
Sekonic's LITEMASTER PRO
L-478-Series meters are
the world's first
touch-screen-operated
light meters. They have
an array of unique,
must-have features for
both still and motion
story tellers. Their
compact size is both
instantly familiar and
comfortable to use. A
large LCD (2.7") displays
ambient, flash, cine
and a host of other
information in a clear
and understandable way.
Settings are made by
simply touching or
sliding a finger over the
screen. The L-478 meters
can be quickly calibrated
to your camera using
Sekonic's Data Transfer
software and either
Sekonic or X-Rite Brand
targets or by manually
inputting data to the DTS
program or on the meter
itself. Keeping pace with
wireless advancements,
the L-478DR-EL comes
complete with exclusive
Elinchrom Skyport
technology which combines
light measurement and
flash power control
providing amazing control
in your hand. The
L-478DR-EL has a radio
module and antenna built
into the meter. The
system transmits at
2.4GHz and uses signal
protocols that are unique
to Elinchrom’s Skyport
wireless
triggering/control
system. The L-478 series
meters offer the
following languages in
the interface: Japanese,
English and Chinese.
Depending on the country
where the meter is
purchased, the language
is fixed and cannot be
changed by the user.
Please be sure to check
the radio frequency and
language before purchase.
Availability: In Stock
£425.00
Available
-
The Sekonic Litemaster
Pro L478 series are the
world’s first
touch-screen operated
light meters with unique
features for both still
and motion imagers. The
layout of the compact and
lightweight Litemaster
Pro L478DR is easy and
comfortable to use. The
large 2.7-inch colour
screen displays ambient,
flash, cine and other
information in a clear
and understandable way.
Settings are a breeze to
customise and amend by
simply touching or
sliding a finger over the
screen. The L478DR
incorporates PocketWizard
wireless technology for
in-meter power control of
select studio flashes
connected to PocketWizard
ControlTL receivers as
well as triggering with
the entire PocketWizard
wireless family. The
meter also uses
Sekonic’s DTS system
that automates meter
calibration to the camera
in use with either
Sekonic or X-Rite Brand
targets or by manually
inputting data to the DTS
program or on the meter
itself.
Availability: In Stock
£369.00
Available
-
The Sekonic Litemaster
Pro L478 series are the
world’s first
touch-screen operated
light meters with unique
features for both still
and motion imagers. The
layout of the compact and
lightweight Litemaster
Pro L478D is easy and
comfortable to use and
the large 2.7-inch colour
screen displays ambient,
flash, cine and other
information in a clear
and understandable way.
Settings are a breeze to
customise and amend by
simply touching or
sliding a finger over the
screen. The meter also
uses Sekonic’s DTS
system that automates
meter calibration to the
camera in use with either
Sekonic or X-Rite Brand
targets or by manually
inputting data to the DTS
program or on the meter
itself.
Availability: In Stock
£325.00
Available
-
The new Digital Master
L-758D Light Meter from
Sekonic is the world’s
first multi-functional
light meter that can be
calibrated to match the
sensitivity of a digital
cameras sensor at all ISO
settings, flash/ambient
or file format
characteristics. Sekonic
have ensured that the
L-758D offers
photographers the
greatest digital exposure
control, accuracy and
repeatability.
Availability: In Stock
£499.00
Available
-
This optional accessory
allows both light
contrast control and
simple illuminance
measurements.
Availability: In Stock
£25.00
Available
-
Sekonic Deluxe Case For
L-478 Series The Deluxe
Case for the L-478-series
meters provides a stylish
way to transport the
meter and a convenient
way to store the optional
5-degree reflected light
attachment. The case’s
belt loop allows for
vertical positioning of
the meter for easy
removal and storage.
Large zipper and full
opening top make for easy
access. Padded front and
back panels provide
excellent protection.
Front pouch with
hook-and-loop closure is
provided to store the
meter’s optional
5-degree viewfinder when
not in use. It folds flat
when the viewfinder is
not inserted.
Availability: In Stock
£25.00
Available
-
Sekonic NP Finder 5
Degree for L-478D/L-478DR
The Viewfinder 5 degree
provides both direct
flash and ambient 5
degree reflected-light,
spot readings when used
with the LiteMaster Pro
L-478D and L-478DR meters
(available separately).
Narrow spot readings
enable reading specific
areas of a subject.
Useful for measuring
exposure for theater,
sports and landscapes
photography. Required for
using Sekonic DTS system
to calibrate meter to the
dynamic range of digital
still and video cameras.
Availability: In Stock
£115.00
Available
-
The new Digital Master
L-758DR Light Meter from
Sekonic is the world’s
first multi-functional
light meter that can be
calibrated to match the
sensitivity of a digital
cameras sensor at all ISO
settings, flash/ambient
or file format
characteristics. Sekonic
have ensured that the
L-758DR offers
photographers the
greatest digital exposure
control, accuracy and
repeatability. The
L-758DR comes with a
built-in radio triggering
module.
Availability: In Stock
£549.00
Available
-
The most advanced and
precise multi-function
light meter for Cine or
Video, plus exposure
calibration for still
imaging. Features
include: Super Sensitive
Reflected Metering: EV -2
to EV 22.9 (incident) and
EV 1 to EV 24.4
(reflected) 1° Spot with
Digital Display:
Rectangular 1° spot
viewfinder with vivid
display. Selectable
Shutter Angles FL, FC,
EV, LUX and cd/m2 Filter
Compensation Retractable
and Rotating Lumisphere
Aperture range: f/0.5 to
f/161.2 (in 1, 1/2 or
1/3 stops) ISO range: 3
to 8000 (in 1/3 steps)
Sync Speed range:
Ambient: 30 mins to
1/8000 sec
Availability: In Stock
£700.00
Denmark