United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Studio & Lighting/Lighting Stands & Support/Overhead Rail Systems
Available
-
Cable transfer runners
allow you to suspend your
cables safely from the
rail system. One package
per light is recommended.
Package of five.
Availability: In Stock
£17.00
Available
-
Holds cables up to 16mm
diameter.
Availability: In Stock
£16.96
Available
-
Carriages are used to
connect the floating
rails to the fixed rails
and to connect light
supports to the rails.
Once your rails are in
place you will need to
attach carriages to slide
your equipment along
them.
Availability: In Stock
£35.00
Available
-
This extension tube may
be added to either end of
a Lite Lift to bring the
light lower or used alone
for a fixed height mount.
Requires an Adapter
Spigot.
Availability: In Stock
£49.00
Available
-
Tool and set of 10 large
bands to attach mains
cables to the outside of
Litelift pantographs and
Cable Transfer Runners.
Availability: In Stock
£5.99
Available
-
Use these Curtain Rail
Runners to connect
curtains or canvasses and
background cloths
directly to the Hi-Glide
rail.
Availability: In Stock
£68.00
Available
-
Bowens Rail Wall Mount
Bracket allows a single
rail to be mounted from a
wall.
Availability: In Stock
£47.00
Available
-
Tool and bands to attach
mains cables to the
outside of Litelifts and
Cable Transfer Runners.
Availability: In Stock
£4.00
Available
-
HiGlide Support Rails are
manufactured from
structural grade
aluminium ensuring a
strong yet lightweight
system. The rails are
supplied in pairs and are
available in lengths of
2m, 3m and 4.5m. You
will need at least two
rails to be fixed to the
ceiling of your studio,
the fixed rails will
support the floating
rails which will support
your lighting equipment.
A Joining Plate can be
used to increase the
length of fixed rails or
to join together a
perimeter track. The
Joining Plate cannot be
used to lengthen floating
rails.
Availability: In Stock
£284.00
Available
-
This Spigot Converter
converts the standard
5/8" spigot to 1 1/8".
Availability: In Stock
£41.00
Available
-
Calumet Hi-Glide Fixed
rails may be joined by
using the Rail Joining
Plates to make up a rail
of any length. Requires
the drilling of rails to
install. The Joining
Plate cannot be used to
lengthen floating rails.
Availability: In Stock
£28.00
Available
-
This rail-mounting
hardware for the Bowens
Hi-Glide system allows
rails to be mounted 20"
(50cm) from the ceiling
structural beam.
Availability: In Stock
£28.00
Available
-
This rail-mounting
hardware for the Calumet
Hi-Glide system contains
a Short Fixing Kit and
several "L" shaped
pieces. This assortment
provides you with the
option of mounting the
clamp to the side or
bottom of various
structural beams.
Availability: In Stock
£37.00
Available
-
Set of four. Fixed rails
require one Rail End Stop
Kit for every pair of
rails and floating rails
require one kit per rail.
End Stops are included
with rails.
Availability: In Stock
£24.00
Available
-
This assembly of many key
components of the Bowens
Hi-Glide Rail Kit allows
users to install this
studio lighting support
system in spaces that
require a customized
selection of rails to fit
interior studio
dimensions. It is
essentially the core
equipment needed to
install a 3-point
lighting system. The
rails are sold separately
to allow users to
coordinate the rail
length to meet their
studio needs or
limitations. The kit is
comprised of: 6x BW2629
Short Fixing Kit 2x
BW2603 Double Carriage 2x
BW2620 Double Carriage
with Brake 3x BW2604
Single Carriage 3x BW2608
LiteLift (inc 1 x Type 1
Spring, 1 x Type 2
Spring, Safety Cable,
Spigot and Cable Fixings)
5x BW2607 Cable Transfer
Runners Aside from the
rails, one needs to
simply furnish lights,
camera and some action
and they will be on their
way.
Availability: In Stock
£1328.00
Available
-
Bowens produces some of
the most innovative, and
advanced studio lighting
systems available today.
Bowens lighting equipment
is used and trusted by
professionals around the
world. These springs
ensure that the Litelifts
hold their desired
position. The springs can
be used individually or
in pairs.
Availability: In Stock
£38.00
Available
-
This rail-mounting
hardware for the Bowens
Hi-Glide system allows
rails to be mounted 12"
(30cm) from the ceiling
structure.
Availability: In Stock
£25.00
Available
-
This extension tube may
be added to either end of
a Lite Lift to bring the
light lower or used alone
for a fixed height mount.
Requires an Adapter
Spigot.
Availability: In Stock
£54.00
Available
-
The pantograph is made of
aluminium (P-Al MgSi UNI
3569) and manufactured
according to DIN
15560-46. The attachments
at both ends of the
pantograph are 16mm,
male on the bottom and
female on the top. The
load is supported by a
steel cable of 2mm.
diameter (safety factor
12). Loads up to 12Kg can
be suspended using only
the patented friction
device, while loads up
to a maximum of 18kg
require the use of the
optional springs. The
pantograph can be
regulated to keep
suspended loads from 1 to
18kg perfectly balanced.
By turning the coulored
notched ring you can
adjust the pantograph’s
friction; this will
ensure that the load
remains stable when set
in position, but that it
will move smoothly up and
down when necessary. In
any case, it is always
advisable to use the
springs to aid raising
your pantograph. When
choosing the additional
spring(s) for your
pantograph, you will
first need to know
exactly which model of
pantograph you have, in
order that you can select
the spring of the correct
length. If you have one
of the new compact
pantographs (with
grey-painted
''scissors''), look at
the colour of notched
ring the 2m version has a
red notched ring, while
the 3.8m version has a
blue notched ring.
Availability: In Stock
£395.00
Available
-
This extension tube may
be added to either end of
a Lite Lift for a
fixed-height mount.
Requires an Adapter
Spigot.
Availability: In Stock
£42.00
Available
-
Carriages are used to
connect the floating
rails to the fixed rails
and to connect light
supports to the rails.
Double-braked carriages
are used on the outside
position of a floating
rail to stabilize and
provide a pivot point for
the floating rail The
Heavy Duty Six-Wheel
Carriage can be used for
mounting power packs or
heavier than normal loads
(up to 40 lbs./18kg)
including power packs.
Availability: In Stock
£47.00
Available
-
Carriages are used to
connect the floating
rails to the fixed rails
and to connect light
supports to the rails.Â
The Heavy Duty Six-Wheel
Carriage can be used for
mounting power packs or
heavier than normal loads
(up to 40 lbs./18kg).
Availability: In Stock
£40.00
Available
-
Use the Fixed Rail Clamp
with Spigot to attach
items to the rail system
that will not be required
to move.
Availability: In Stock
£25.00
Available
-
This rail-mounting
hardware for the Bowens
Hi-Glide system allows
rails to be mounted 39"
(100cm) from the ceiling
structural beam.
Availability: In Stock
£31.00
Available
-
HiGlide Support Rails are
manufactured from
structural grade
aluminium ensuring a
strong yet lightweight
system. The rails are
supplied in pairs and are
available in lengths of
2m, 3m and 4.5m. You
will need at least two
rails to be fixed to the
ceiling of your studio,
the fixed rails will
support the floating
rails which will support
your lighting equipment.
A Joining Plate can be
used to increase the
length of fixed rails or
to join together a
perimeter track. The
Joining Plate cannot be
used to lengthen floating
rails.
Availability: In Stock
£137.00
Available
-
The scaffold clamp allows
rails to be mounted
parallel to a standard
scaffold pole.
Availability: In Stock
£26.99
Available
-
This spare retaining clip
is intended for attaching
spring to Litelift.
Availability: In Stock
£6.00
Available
-
Adjustable Bracket For
Rail To Ceiling FF3215
Availability: In Stock
£32.95
Available
-
This transports cables
along the top of the rail
rather than hanging
beneath.
Availability: In Stock
£19.99
Available
-
This adjustable rail
mounting hardware for
the Bowens Hi-Glide
system allows rails to be
mounted up to 39" (100cm)
from the ceiling
structural beam. The drop
ceiling tube is used to
drop the mounting point
for the fixed rail if you
need to get below a
suspended ceiling or
simply lower the rail
system to a more
convienient height.
Availability: In Stock
£47.00
Available
-
This adjustable
rail-mounting hardware
for the Bowens Hi-Glide
system allows rails to be
mounted up to 20" (50cm)
from the ceiling
structural beam. The drop
ceiling tube is used to
drop the mounting point
for the fixed rail if you
need to get below a
suspended ceiling or
simply lower the rail
system to a more
convienient height.
Availability: In Stock
£43.00
Available
-
This adjustable
rail-mounting hardware
for the Bowens Hi-Glide
system allows rails to be
mounted up to 12" (30cm)
from the ceiling
structural beam. The drop
ceiling tube is used to
drop the mounting point
for the fixed rail if you
need to get below a
suspended ceiling or
simply lower the rail
system to a more
convienient height.
Availability: In Stock
£42.00
Available
-
Clamps directly to the
underside of a steel
I-beam on your studio
ceiling. Adjusts to fit
beams measuring 2 1/2" to
8" (6 to 20cm) wide and
from 1/8" to 1/2" (3 to
12mm) thick. When the
clamp is installed, the
rails will run at a 90°
angle to the supporting
I-beam. If the rails are
intended to run parallel
to the supporting I-beam,
a Back-to-Back Rail
Clamp is required for
each girder clamp. One
clamp is needed for every
3' (91cm) of rail to be
mounted to the ceiling.
Availability: In Stock
£56.00
Available
-
By using the Bogen Expan
System (sold separately),
you can hang up to three
rolls of background paper
on the three-hook
background holder. This
comes with a set of two
3-way hooks connected to
single carriages for
movement along the
overhead rail system.
Availability: In Stock
£143.00
Available
-
For Hi-Glide rails that
run parallel to the
supporting ceiling
I-beam, a Back-to-Back
Rail Clamp is required
for each girder clamp.
Availability: In Stock
£28.00
Available
-
This rail-mounting
hardware for the Calumet
Hi-Glide consists of a
flat plate and two
clamping pieces. By using
wood screws or bolts,
this unit may be attached
directly to the underside
of a wood or steel
structural beam. This
piece could also be
permanently welded into
place on a steel beam.
Availability: In Stock
£11.00
Available
-
Large soft boxes can move
the balance point forward
of the mounting point,
causing the Lite Lift to
bend and become difficult
to operate. The Center of
Gravity Bar allows you to
adjust the balance point.
Availability: In Stock
£93.00
Available
-
The Double Carriage with
Brake will stay locked in
position and should be
used at least one per
rail to rail connection
to ensure rails stay in
their desired position.
Availability: In Stock
£54.00
Available
-
Cheap insurance for your
clients and your
equipment. The frequent
movement of the Lite
Lifts may cause the
fixing screws to work
loose. A Safety Cable
will prevent the device
from falling should you
not detect it in time. A
cable is recommended at
every detachable joint.
Availability: In Stock
£11.00
Available
-
The short Litelift has a
minimum extension of 28cm
and a maximum of 121cm
and is designed for lower
ceiling heights. It is
supplied with two
compensator springs,
safety cable and spring
removal key.
Availability: In Stock
£234.00
Available
-
The Hi-Glide Litelift
pantograph extends from
34cm (minimum) to 189cm
(Maximum) and includes
two compensator springs,
safety cable and a spring
removal key.
Availability: In Stock
£301.00
Available
-
Carriages are used to
connect the floating
rails to the fixed rails
and to connect light
supports to the rails.
Double-braked carriages
are used on the outside
position of a floating
rail to stabilize and
provide a pivot point for
the floating rail. The
Double Carriage allows a
floating rail to be
attached to a fixed rail
while still allowing full
movement between them.
Availability: In Stock
£38.00
Available
-
HiGlide Support Rails are
manufactured from
structural grade
aluminium ensuring a
strong yet lightweight
system. The rails are
supplied in pairs and are
available in lengths of
2m, 3m and 4.5m. You
will need at least two
rails to be fixed to the
ceiling of your studio,
the fixed rails will
support the floating
rails which will support
your lighting equipment.
A Joining Plate can be
used to increase the
length of fixed rails or
to join together a
perimeter track. The
Joining Plate cannot be
used to lengthen floating
rails.
Availability: In Stock
£203.00
Available
-
Monorail Extension for
Ultima, Legend, Master
and SF camera system.
Extension length 6"
(15cm)
Availability: In Stock
£152.35
Available
-
Hi-Glide support rails
are manufactured from
structural grade aluminum
combining supreme
strength with minimal
weight. Rails are
supplied in pairs and
include end stops.
Availability: In Stock
£126.00
Denmark