The WT-4 is a high performance Wireless Transmitter for specified Nikon digital SLRs. It supports wired LAN (10BASE-T, 100BASE-TX) and wireless LAN (IEEE802.11b/g, 11a), and enables the creation of multiple camera networks with remote image browsing and download capability. The stand-alone unit can be worn on the waist and enhances the photographer’s ability to shoot without interruption. Remote control of the camera settings and LiveView output is possible with a computer on which Nikon Camera Control Pro 2 software is installed. The WT-4 is powered by a specified Nikon battery, or AC adapter. For use with: Nikon D300, D300s, D3, D3x, D3s, D700, D7000, D800, D4
The new WFT-E6 unit takes the WiFi possibilities with the EOS-1D X to a new level by offering advantages such as 802.11a/b/g and n compatibility, DLNA compliance, FTP, EOS Utility and WFT Server shooting, as well as Linked Shooting for remote shutter triggering of other WiFi-enabled EOS-1D X cameras. Who is it for? Great for sports and news photographers the WFT-E6 unit will allow rapid transfer of images to an access point and out to a picture desk. However, It is not just for news and sports photographers as studio photographers will enjoy the ability to see previews of their images on a large screen by transmitting JPEGs to their computer. Travel, landscape and wildlife photographers will like the built-in Bluetooth compatibility that allows them to use a Bluetooth connection to a GPS device for geo-tagging, and those photographers who like experimenting with technology to push the boundaries of what is possible will find the linked shooting and advanced WFT Server modes especially appealing. IEEE 802.11a, 802.11b, 802.11g and 802.11n compatibility Linked shooting Digital Living Network Alliance (DNLA) compatible WFT Server shooting EOS Utility Mode Built-in Bluetooth transceiver Wireless Time Syncing WiFi Protected Setup (WPS) Internal antenna with range of approximately 150 metres Dust and drip-proof construction to match the EOS-1D X Smaller, lighter and more compact than previous WFT units
Nikon’s wireless mobile adapter allows images to be transferred directly to any smartphone or tablet, and enables the camera to be controlled remotely via the smart device. A great way to easily share high-quality images, preview shots on a larger screen or experiment with full-frame self-portraits. Easy Transfer: Images from the D600 can be downloaded to a compatible smart device as they are taken, or existing images can be downloaded from the camera's SD memory card. Note: Images will be downloaded after they are saved to the camera's memory card. Easy Sharing: Single images or groups of images can be shared using apps stored on the smart device via email, text messaging or by uploading to a blog or social networking site—just like any other image on your smartphone or tablet. Notes: Movies cannot be viewed using the Wireless Mobile Adapter utility (app) but can be played back by tapping the movie or playback icon, to display a list of movie apps and choosing an app from the list. The WU-1b Wireless Mobile Adapter works with Wi-Fi 11b/g/n. Wi-Fi Shooting: Images can be taken remotely using a compatible smart device using the camera's Live View preview on the smart device to frame and compose the subject. Note: Smart device is used to remotely fire the camera, maximum distance is up to 49 feet and the smart device can’t be used to adjust settings on the camera. The dedicated application, running on the Android™ smartphone (platform 2.3 or later); or Android™ tablet (platform 3.0 or later) operating system is required to use the WU-1b.*
The Quantum FW9T Transmitter provides simple operation, increased range, and lower cost. You can match sets of FreeXwire units to work together on the same channel, or separate groups of FreeXwires can work independently on different channels, with up to 32 individual Channel/Zone settings at your disposal, and 256 possible lighting combinations. Compatible with an FW7Q, FW8R, or an upgraded FW10w Transceiver. Mount a FW9T or FW10/10w transmitter and FW12 Hot Shoe Adapter to the camera and be totally wireless. Or, add a "D" or "Dw" series QTTL adapter to the camera and transmit your camera's f/stop, ISO, and TTL exposure information to the remote Qflash 5d. Might require additional cables or accessories, depending on flash and/or camera used. Please refer to www.qtm.com
Totally cordless, the FW7Q mounts the flash to a Qflash 4d or 5d, and requires no batteries. Mount an FW9T or FW10/10w transmitter and FW12 Hot Shoe Adapter to the camera and be totally wireless. You can also add a D or Dw series QTTL adapter between the FW9T Transmitter and the camera and transmit your camera's f/stop, ISO, and TTL exposure information to the remote Qflash 5d.
Receiver FW8R - Use this receiver with any shoe, handle mount flash or Qflash asa wireless flash sync. When connected to a Qflash (with an FW31 accessory cable)camera TTL information is relayed wirelessly. Slide the Shutter MD Delay switch to the MD position, connect a Shutter Release (Motor Drive) Cord from the Receiver FW8R to the camera shutter release connection activate a camera shutterup to 1000ft. away.
The Nikon UT-1 Communications Unit allows the user to automatically transfer images to your computer as they are captured, and transfer photographs and movies from the memory card to your computer, via a cabled Ethernet connection. The UT-1 is fully compatible with the Nikon D4, D800, D800S and D7000. When used in conjunction to Camera Control Pro 2 or other separately available software you can use your computer to remotely control camera functions
With an operating range of up to 150ft, the CamRanger provides a huge amount of control and flexibility over your DSLR camera and allows you to see the live view image when your camera is placed in remote locations such as bird hides, surveillance or Pole Aerial Photography applications, and is ideally suited to the world of Macro Photography with its touch focussing feature and fine focus control. Whether you are looking for a stills or video solution, CamRanger is hugely flexible allowing you to capture and view great images or footage from a distance. For Macro photography the touch screen focus facility gives amazing control that can be fine tuned with manual focus adjustment, all via your iOS (iPad, iPhone, iPod Touch) screen and a great Focus Stacking feature will help create ideal images for editing in your Focus Stacking application to create huge depth of focus. Where exposure control is important, you can adjust your settings via the touch screen and add exposure compensation if required. To create jaw dropping scenes with huge Dynamic range an HDR Bracketing feature is built in to control your exposures perfectly, ready for editing in your HDR application. As time passes and the light changes, adjustments to the White Balance can be made remotely to create that perfect image. The iOS application not only gives you a Live view of what your camera sees, but also the capability to view, download and delete images that are on your cameras memory card – all remotely and wirelessly. If you would like to view images in more detail then you can zoom into the full resolution of the JPEG file and Canon RAW format images to fully check exposure and composition. This can also be especially useful where you want to shoot images in a studio or location environment where the artistic director can see images as they are being shot – all completely wirelessly. The CamRanger device is about the size of an iPhone and is powered by a rechargeable, replaceable battery. Its size and portability allows CamRanger to be used in a variety of settings and it does not need any wireless networks to operate as it creates its own virtual network to communicate wirelessly with the app installed on your Apple iOS device.
Nikon WT-7 Wireless Transmitter Nikon's WT-7/A/B/C Wireless Transmitter is aimed at professionals who need to transfer images more quickly than they can with built-in wireless LAN. When attached to the D500, it allows images and movie files to be transferred to computers* or FTP server via both wired and wireless LAN. The D500 with WT-7/A/B/C can be used as a wireless LAN access point, permitting easy connections with computers and smart devices. *Requires Wireless Transmitter Utility (available for download from Nikon website).
Nikon WT-6 Wireless Transmitter The WT-6 is a wireless transmitter for certain Nikon DSLRs. This compact, high-performance transmitter allows communication between the camera and a wireless network over a distance of up to 200 m. It supports wireless LAN IEEE802.11ac. The transmitter attaches to the camera’s interface connector and is powered by the camera body. It features Access Point, HTTP, and FTP modes and allows for the simultaneous release of several cameras. Remote control of camera settings and Live View output is possible in HTTP mode, or via a computer on which Nikon Camera Control Pro 2 software is installed. HTTP mode allows you to use any web browser, including one on a smart device, for remote operation via a wireless or Ethernet cable connection.
Canon WFT-E8B Transmitter Link, connect and share with WiFi connectivity. Open up the EOS-1D X Mark II to a wider world of connectivity with the WFT-E8 wireless transmitter. Featuring fast wireless LAN transmission thanks to IEEE 802.11ac compatibility, enhanced FTP transfer options and remote shooting, the WFT-E8 provides a host of additional functions to fully exploit the capabilities of the EOS-1D X Mark II. Transfer data from up to 150m away at high speed thanks to IEEE 802.11ac standard (5Ghz band), which supports around 2.5x faster communication than IEEE 802.11n. Securely link to an FTP server remotely using the FTPS (File Transfer Protocol over SSL/TLS) and shoot and send images in real time. Shoot, review and playback images or movies remotely thanks to the WFT server option within the WFT-E8. Control camera settings such as focus, shutter speed, Live View and playback movies as well as review RAW images. Connect to a Smartphone or tablet with Canon’s Camera Connect app for remote capture, review, rating, transfer and sharing of images when the camera needs to be placed out of reach, eg behind the goal at a football match. Link up to 10 cameras with WFT-E8 or WFT-E7 transmitters for synchronised shooting up to 100 metres away. Features: Faster data transfer – supports IEEE 802.11ac standard Secure File Transfer Protocol over FTP/FTPS WFT Server shooting for remote capture and movie shooting Smartphone/tablet shooting for remote capture with Canon Camera Connect App Link up to 10 cameras to shoot remotely at a range of up to 100m