United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Accessories/Cleaning Supplies/Sensor Cleaning
Available
-
Sensor Swabs™ are
designed for cleaning CCD
chips and other delicate
or hard to reach optical
and imaging surfaces.
Clean room manufactured
and sealed, these swabs
are the ultimate in
purity. Sensor Swabs must
be used with Eclipse or
E2 Cleaning Fluid,
available separately Size
Two for Canon
D30/D60/10D/20D/30D/40D
/300D/350D/400D/450D,
Nikon DX, Pentax, Sony
Availability: In Stock
£36.62
Available
-
Vswab™ from VisibleDust
is a new innovative
unique (patent pending)
design of Sensor cleaning
swabs.*12 swabs per pack-
it fits full sensor size
such as Nikon D3, 1dsMK
III and 5D. Compatible
with: VDust Plus™ The
advantages of the (patent
pending) Vswab ™ over
the former or square
format swab comes from
its unique letter "V"
shape. This shape has
several advantages over
the square format swabs
currently in the market.
For example, the
narrower edge of the V
shaped swab minimizes the
contact between the swab
and the chamber wall.
This ultimately
eliminates the lint
produced inside the
camera eventually from
falling on the sensor.
Another advantage of the
V swab™ is a better
maneuverability and easy
swabbing while inside the
chamber. Due to its
triangular form The Vswab
™ (patent pending)
applies equal pressure to
the edge of the swab pad.
This brings a more
homogeneous swabbing
motion and less streaking
along the edges.
Cautionary Note:
Visibledust sensor
cleaning solutions and
swabs are calibrated to
work together to produce
optimal and safe results.
Please DO NOT USE
alternative solutions
with the VisibleDust
swab. A simple grain of
quartz which is found in
cheaper solutions are
enough to produce an
expensive scratch on the
low pass filter.
VisibleDust solutions are
manufactured to the
highest standard of
quality that is practiced
in pharmaceutical
industries. Visibledust
solutions are calibrated
for NORMAL evaporative
rates: to keep the swab
moist at all time to
reduce the risk of
scratch to increase the
cleaning power, less
swabbing more economical
to reduce friction by
being moist all time
during swabbing The
potential risk of FAST
evaporative solutions
used as sensor cleaning
are the following: an
increase in the risk of
damage and stress to
sensor coating by using
premature dry swab a
great reduction in
cleaning power by
shortening the contact
time between contaminants
and solution due to the
increased evaporation
rate of the solution
increase in friction by
using a premature drying
swab, resulting in
static charge build up
leading to an even
greater dust accumulation
on the sensor VisibleDust
cleaning liquids are
intended to be placed on
the swab first, so the
concern for liquid
seeping through the
sensor is not valid or
accurate. On the other
hand, the disadvantages
of a generic brand or
FAST evaporative liquid
used for sensor cleaning
may in fact may casue
damage to the sensor by
requiring repeat swabbing
and is not recommended.
Availability: In Stock
£40.00
Available
-
The DHAP Fabric™ Corner
Swabs™ have been
tailored specifically to
remove dust build up in
those “hard to reach”
areas. Compatible with
oVDust Plus™ and Smear
Away™ these swabs were
specifically fabricated
for cleaning the corners.
Comprehensive cleaning of
your sensor has never
been easier then with the
DHAP Fabric™ Corner
Swabs™. 16 swabs per
pack. Cautionary Note:
Visibledust sensor
cleaning solutions and
swabs are calibrated to
work together to produce
optimal and safe results.
Please DO NOT USE
alternative solutions
with the VisibleDust
swab. A simple grain of
quartz which is found in
cheaper solutions are
enough to produce an
expensive scratch on the
low pass filter.
VisibleDust solutions are
manufactured to the
highest standard of
quality that is practiced
in pharmaceutical
industries. Visibledust
solutions are calibrated
for NORMAL evaporative
rates: to keep the swab
moist at all time to
reduce the risk of
scratch to increase the
cleaning power, less
swabbing more economical
to reduce friction by
being moist all time
during swabbing The
potential risk of FAST
evaporative solutions
used as sensor cleaning
are the following: an
increase in the risk of
damage and stress to
sensor coating by using
premature dry swab a
great reduction in
cleaning power by
shortening the contact
time between contaminants
and solution due to the
increased evaporation
rate of the solution
increase in friction by
using a premature drying
swab, resulting in
static charge build up
leading to an even
greater dust accumulation
on the sensor VisibleDust
cleaning liquids are
intended to be placed on
the swab first, so the
concern for liquid
seeping through the
sensor is not valid or
accurate. On the other
hand, the disadvantages
of a generic brand or
FAST evaporative liquid
used for sensor cleaning
may in fact may casue
damage to the sensor by
requiring repeat swabbing
and is not recommended.
Availability: In Stock
£31.99
Available
-
This Double layer High
Absorbency fabric is
super soft and made of
super thin fibers. It is
used in cleaning delicate
surfaces such as space
telescopes. The fabric is
woven to be non-shedding.
Its high absorbency
capacity makes it ideal
for the surface cleaning
of delicates optics. The
fabric has also a unique
folding design that
creates a softer edge
compared to a hot sealing
process. Compatible with
VDust Plus™ and Smear
Away™. The specially
developed mini-channel
design provides an even
saturation of the paddles
surface while preventing
pooling and vertical flow
at the edge. This reduces
streaks associated with
traditional flat surface
paddles. The
mini-channels also
provide the extra
reservoir to absorb the
excessive liquid and
prolonging the moisture
life of the swab during
the cleaning process. 12
per pack. Cautionary
Note: Visibledust sensor
cleaning solutions and
swabs are calibrated to
work together to produce
optimal and safe results.
Please DO NOT USE
alternative solutions
with the VisibleDust
swab. A simple grain of
quartz which is found in
cheaper solutions are
enough to produce an
expensive scratch on the
low pass filter.
visibleDust solutions are
manufactured to the
highest standard of
quality that is practiced
in pharmaceutical
industries. Visibledust
solutions are calibrated
for NORMAL evaporative
rates: to keep the swab
moist at all time to
reduce the risk of
scratch to increase the
cleaning power, less
swabbing more economical
to reduce friction by
being moist all time
during swabbing The
potential risk of FAST
evaporative solutions
used as sensor cleaning
are the following: an
increase in the risk of
damage and stress to
sensor coating by using
premature dry swab a
great reduction in
cleaning power by
shortening the contact
time between contaminants
and solution due to the
increased evaporation
rate of the solution
increase in friction by
using a premature drying
swab, resulting in
static charge build up
leading to an even
greater dust accumulation
on the sensor VisibleDust
cleaning liquids are
intended to be placed on
the swab first, so the
concern for liquid
seeping through the
sensor is not valid or
accurate. On the other
hand, the disadvantages
of a generic brand or
FAST evaporative liquid
used for sensor cleaning
may in fact may casue
damage to the sensor by
requiring repeat swabbing
and is not recommended.
Availability: In Stock
£40.00
Available
-
This Double layer High
Absorbency fabric is
super soft and made of
super thin fibers. It is
used in cleaning delicate
surfaces such as space
telescopes. The fabric is
woven to be non-shedding.
Its high absorbency
capacity makes it ideal
for the surface cleaning
of delicates optics. The
fabric has also a unique
folding design that
creates a softer edge
compared to a hot sealing
process. Compatible with
VDust Plus™ and Smear
Away™. The specially
developed mini-channel
design provides an even
saturation of the paddles
surface while preventing
pooling and vertical flow
at the edge. This reduces
streaks associated with
traditional flat surface
paddles. The
mini-channels also
provide the extra
reservoir to absorb the
excessive liquid and
prolonging the moisture
life of the swab during
the cleaning process. 12
per pack. Cautionary
Note: Visibledust sensor
cleaning solutions and
swabs are calibrated to
work together to produce
optimal and safe results.
Please DO NOT USE
alternative solutions
with the VisibleDust
swab. A simple grain of
quartz which is found in
cheaper solutions are
enough to produce an
expensive scratch on the
low pass filter.
visibleDust solutions are
manufactured to the
highest standard of
quality that is practiced
in pharmaceutical
industries. Visibledust
solutions are calibrated
for NORMAL evaporative
rates: to keep the swab
moist at all time to
reduce the risk of
scratch to increase the
cleaning power, less
swabbing more economical
to reduce friction by
being moist all time
during swabbing The
potential risk of FAST
evaporative solutions
used as sensor cleaning
are the following: an
increase in the risk of
damage and stress to
sensor coating by using
premature dry swab a
great reduction in
cleaning power by
shortening the contact
time between contaminants
and solution due to the
increased evaporation
rate of the solution
increase in friction by
using a premature drying
swab, resulting in
static charge build up
leading to an even
greater dust accumulation
on the sensor VisibleDust
cleaning liquids are
intended to be placed on
the swab first, so the
concern for liquid
seeping through the
sensor is not valid or
accurate. On the other
hand, the disadvantages
of a generic brand or
FAST evaporative liquid
used for sensor cleaning
may in fact may casue
damage to the sensor by
requiring repeat swabbing
and is not recommended.
Availability: In Stock
£40.00
Available
-
DUST-AID™ Platinum
takes dry sensor cleaning
to a whole new level.
dust-Aid have taken dry
sensor filter cleaning to
a whole new level with
the introduction of our
new, patent pending,
Platinum DSLR Cleaner.
It's now possible to
clean any sensor filter
no matter its coating or
internal dust removal
system (IDRS) filter
housing. And to top it
off, it can clean its
own platinum cured
cleaning silicone with
specially made cleaning
strips, extending it's
cleaning life span. The
specially engineered
cleaning silicone used in
the new Platinum DSLR
Cleaner makes it
perfectly safe to use on
any sensor filter. No
more dragging dry brushes
and their accumulated
dust across the sensor
filter, which could lead
to scratching. Now, just
press and lift a couple
of times and your done!
1. Safely cleans uncoated
sensor filters. We've
tested the Platinum on
uncoated sensor filters
with no affect to the
sensor filter. 2. Safely
cleans ITO and Dichroic
sensor filters. We've
tested the Platinum on
ITO, Dichroic and weak
coated sensor filters
with no affect to the
sensor filter coatings.
3. Safely cleans
I.D.R.S.* sensor filters.
We've tested the Platinum
on multiple IDRS sensor
filters with no affect to
the intenal dust removal
system housing or sensor
filter alignment. One of
the biggest features with
the new Platinum cleaner
is its ability to have
the cleaning silicone
repeatedly cleaned free
of accumulated dust and
fibers. This means that
you could have a lifetime
of use out of the
Platinum cleaner. The
Platinum cleaner comes
with 6 silicone cleaning
applications and with the
purchase of additional
cleaning strips the life
span of the Platinum
could be extended
indefinitely. The
cleaning adhesive used to
clean the Platinum
silicone has been
developed and tested not
to transfer any of the
adhesive to the silicone.
The Platinum DSLR Cleaner
is made from a specially
manufactured platinum
cured silicone that does
not use any molds or mold
release agents in its
creation. This eliminates
the chance of mold
release agents
permanently bonding and
contaminating the
silicone when it's
molded. The use of this
specially engineered
silicone is patent
pending. The Platinum
silicone also has a
patent pending micro
texture on the cleaning
surface which helps to
stop the formation of a
vacuum seal when it's
applied to a cleaning
surface. When the
silicone is depressed on
a surface the micro
texture flattens out and
adheres to any dust or
fibers. Then, when the
pressure is released the
micro texture flex's back
into place and allows air
in, breaking the vacuum
seal. This helps to
reduce the adhesion
strength and impact of
the cleaning. We have
eliminated every possible
contamination to the
cleaning silicone but
there is a built in
factor that no rubber or
polyethylene cleaner has
control over, internal
oils. These blends of
cohesive materials use
oils that make them soft
and allow them to pick up
dust and fibers. We have
designed our cleaning
silicone not to transfer
these oils to a surface
when applied in a
straight, up-down manor.
If you where to drag the
silicone on its side or
twist the silicone it
could leave residue. This
residue can be easily
removed with our
DUST-WAND KIT™. But,
if you follow the
directions and lift the
cleaner straight up and
down then you will have
no problem. Cleaning
finger and camera oil
from silicone: If you
happen to get finger or
camera oil on the
Platinum silicone then
it's very easy to remove.
Simply clean the silicone
with our DUST-CLOTH and
ULTRA CLEAN liquid and
then use the Cleaning
Strips to remove any
fibers. Test the Platinum
silicone before use on a
piece of clean glass,
like a common UV HAZE
filter, to see if you
removed all of the oil.
Repeat as needed. It's
advised to test the
Platinum silicone on a
piece of clean glass
before use due to
possible accidental skin
contact which can
contaminate the cleaning
surface of the silicone.
Availability: In Stock
£27.00
Available
-
Chamber Clean™ has been
specifically developed to
aid in the reduction of
dust within the chamber
area. It not only cleans
away dust and oils that
accumulate on the walls
and mechanisms but also
provides anti-static
properties to reduce
further build up. Chamber
Clean™ is specifically
formulated to have the
following
characteristics:
Antistatic - to prevent
dust accumulation
Cleaning - helps remove
stubborn flecks, dust
and liner fabrics
Lubricant - to reduce
flecks by reducing
friction Chamber Clean™
solution is filtered to
less than 0.2 micron, 40
times smaller than 8
micron pixel size.
Visible Dust does not
recommend using other
cleaning solutions which
may contaminate the
sensor.
Availability: In Stock
£31.99
Available
-
SwabLight™ is the
world's first innovative
and unique product
(patent pending) from
VisibleDust to enhance
and facilitate the DSLR
sensor cleaning
technique. Since the
sensor of digital camera
is buried deep inside the
chamber wall and covered
with a dark surface to
prevent lights from
bouncing off, therefore
this is a very difficult
task for operator to
position the swab exactly
along the sensor edges,
avoiding contamination by
accidental contact with
chamber walls. Most swab
handles are made thin
with little grip to be
held firmly in hands
reducing proper
manipulation. A better
grip on swab handle
results for a more
uniform pressure and
movement producing streak
free cleaning.
SwabLight™ from
VisibleDust greatly
overcomes these
deficiencies by having: A
better and a firm swab
grip for a proper
movement and pressure for
streak free results. A
better swab positioning
on the sensor to easily
master edge to edge
sensor cleaning. A better
and clear view of the
sensor surface during
sensor cleaning. Above
all, using SwabLight™
from VisibleDust lessens
the fear associated with
self sensor cleaning,
greatly enhances
efficiency and the
results reducing the
number of swabs used per
sensor cleaning session
leading to more saving.
SwabLight™ takes you to
a completely higher
professional level and
fun sensor cleaning
experience.
Availability: In Stock
£22.00
Available
-
Sensor Clean™ has many
characteristics that make
it an excellent choice
for cleaning your sensor.
While it is best used on
water based stains and
light dust contamination,
it also provides
excellent dust repellent
properties and
anti-fogging
capabilities. Sensor
Clean™ works best with
VisibleDust Green Series
Swabs. All of our
solutions are safe on ITO
and non ITO coated
sensors. VisibleDust
liquid cleaners (Sensor
Clean, VDust Plus and
Smear Away) when used
with VisibleDust Sensor
Cleaning swabs are safe
and effective on ALL
DSLRs including: Newer
Canon DSLRs, such as the
400D, 40D, 1D MKIII,
and 1Ds MKIII, Newer
Nikon D300 and D3 and
Alpha Sony 700.
Cautionary Note:
Visibledust sensor
cleaning solutions and
swabs are calibrated to
work together to produce
optimal and safe results.
Please DO NOT USE
alternative solutions
with our swab. A simple
grain of quartz which is
found in cheaper
solutions are enough to
produce an expensive
scratch on the low pass
filter. VisibleDust
solutions are
manufactured to the
highest standard of
quality that is practiced
in pharmaceutical
industries. Visibledust
solutions are calibrated
for NORMAL evaporative
rates: to keep the swab
moist at all time to
reduce the risk of
scratch to increase the
cleaning power, less
swabbing more economical
to reduce friction by
being moist all time
during swabbing The
potential risk of FAST
evaporative solutions
used as sensor cleaning
are the following: an
increase in the risk of
damage and stress to
sensor coating by using
premature dry swab a
great reduction in
cleaning power by
shortening the contact
time between contaminants
and solution due to the
increased evaporation
rate of the solution
increase in friction by
using a premature drying
swab, resulting in
static charge build up
leading to an even
greater dust accumulation
on the sensor Visibledust
cleaning liquids are
intended to be placed on
the swab first, so the
concern for liquid
seeping through the
sensor is not valid or
accurate. On the other
hand, the disadvantages
of a generic brand or
FAST evaporative liquid
used for sensor cleaning
may in fact may casue
damage to the sensor by
requiring repeat swabbing
and is not recommended.
Availability: In Stock
£20.99
Available
-
Visible Dust EZ
Corner2Corner Light
Cleaning Kit - 1.0x (24
mm Full frame) Swab Size
Enhancements: Better
value than single liquid
EZ sensor cleaning VDust
Plus multi ingradient,
Iso alcoholic solution,
removes oil fast,
evaporates fast,
excellent for cleaning
mirror with DHAP orange
swab, streak free
motion, best used with
DHAP Orange swab
excellent to be used on
fluorine coated sensor.
Orange DHAP Vswab
patented V shape results
best maneuverability
inside chamber, used in
high end industrial optic
cleaning such as space
optical lenses, woven
fabric prevents
scratches, holds liquid
the best, thin and
extremely soft, only
compatible with VDust
Plus solution, streak
free motion of the swab
is due to its patented
Vshape, reaches the
corner best, excellent
for mirror cleaning when
used with VDust Plus,
not compatible with
sensor clean or smear
away. Orange DHAP Corner
Swabs™ have been
tailored specifically to
remove dust build up in
those «hard to reach»
areas. Only compatible
with VDust Plus™,
these swabs were
specifically fabricated
for cleaning the corners.
Usage Use regular Vswab®
to clean the sensor. If
the contamination persist
at corners and edges,
use Corner Swab™ as
directed. Use each face
once. This Kit includes:
Orange DHAP Vswabs size
specific (9 per pack)
Orange DHAP Corner Swabs
(3 per pack) Liquid
cleaner VDust Plus 1.15
ml (2)
Availability: In Stock
£44.00
Available
-
This wet do-it-yourself
wrapping kit is a very
cost effective way to
clean welded-on dust from
your entire collection of
DSLR camera bodies. The
versatility comes from
the three included
DUST-WAND's needed to
clean any sensor aspect
ratio, 1.6 (14mm), 1.3
(16mm) and 1.0 (18mm).
When it comes to cleaning
liquid evaporation speed,
then there is non faster
than ULTRA CLEAN™. This
non-flammable and
non-alcohol based liquid
is one of the fastest
dissolving liquids on the
planet, which makes it
virtually impossible for
it to seep under the
sensor filter frame. Also
included are small cloth
clips that are used to
hold the cleaning wipe in
place. No more having to
carry around a roll of
tape to hold the wrap,
now you can just throw on
a clip and the cloth will
stay in place. With the
kit comes DUST-CLOTHs™,
our non woven wipes.
There are 50 cloths per
kit which come in a zip
lock bag to keep them
clean. To round out the
kit you will also receive
a travel friendly hard
plastic case which
everything fits in. 1 x
DUST-WAND 1.6 (14mm) 1 x
DUST-WAND 1.3 (16mm) 1 x
DUST-WAND 1.0 (18mm) 1 x
ULTRA CLEAN Liquid 3 x
Cloth Clips 50- 4"x4"
DUST-CLOTH 1 x ZIP LOCK
BAG
Availability: In Stock
£29.95
Available
-
Visible Dust EZ SwabLight
Kit Vdust Plus Orange
Vswabs - 1.6x (16 mm
Cropped Sensor) Swab Size
The VDust Plus sensor
cleaning liquid and
Vswabs allow removing
most of wet contamination
stains (water and oil)
from any digital camera
sensor. EZ SwabLight Kit
Vdust Plus Green Vswabs
contains: VDust Plus
cleaning liquid (1.15 ml)
DHAP Orange sensor
cleaning swabs — Vswabs
(size specific, 4 per
pack) SwabLight
Availability: In Stock
£39.00
Available
-
Visible Dust EZ
Corner2Corner Regular
Strength Kit - 1.6x (16
mm Cropped Sensor) Swab
Size Enhancements: More
versatile than single
liquid Switching liquids
enhances cleaning Better
value than single liquid
Easier to remove tough
stain Most current sensor
technology utilizes water
repellent hydrophobic
coating to reduce stain
mark. Vdust Plus is an
excellent alcohol based
cleaning solution with
fast evaporating quality
ideal for removal of
water stain, compatible
with hydrophobic sensor
coating. However,
alcohol has poor cleaning
quality for most common
type of stains such as
saliva and organic
materials. In the other
hand, Sensor Clean is an
excellent cleaning
solution powerful enough
to remove organic and
saliva stains but is
water based. Since simple
visual inspection can not
determine the nature of
stain light or heavy,
first start with either
liquid, if stain is
removed, Stop. Otherwise
switch liquid, use a new
swab proceed with
cleaning. Do not add two
liquids on the same swab.
Use each liquid with
separate swab. Always
swab in the same
direction. Sensor Clean
has many characteristics
that make it an excellent
choice for cleaning your
sensor. While it is best
used on water based
stains and light dust
contamination, it also
provides excellent dust
repellent properties and
anti-fogging
capabilities. Sensor
Clean works best with
VisibleDust MXD-100 Green
Series Swabs. VDust Plus
multi ingradient, Iso
alcoholic solution,
removes oil fast,
evaporates fast, streak
free motion compatible
with both DHAP orange and
Ultra MXD-100 green
Vswab. Green MXD-100
Vswab patented V shape
results best
maneuverability inside
chamber, V shape results
in homogeneous motion,
it cleans corner the best
due to its V shape,
compatible with all three
solutions, multi fabric
ensures best results for
oil and smear removal,
its soft texture is safe
on coated sensor, best
used for fluorine coated
sensor, streak free
motion. Green MXD-100
Corner Swabs have been
tailored specifically to
remove dust build up in
those «hard to reach»
areas. Compatible with
our full arsenal of wet
cleaning solutions,
these swabs were
specifically fabricated
for cleaning the corners.
Usage Use regular Vswab
to clean the sensor. If
the contamination persist
at corners and edges,
use Corner Swab as
directed. Use each face
once. This Kit includes:
Green MXD-100 Vswabs size
specific (9 per pack)
Green MXD-100 Corner
Swabs (3 per pack) Liquid
cleaner Sensor Clean 1.15
ml (1) Liquid cleaner
VDust Plus 1.15 ml (1)
Availability: In Stock
£44.00
Available
-
Visible Dust EZ SwabLight
Kit Vdust Plus Green
Vswabs - 1.0x (24 mm Full
frame) Swab Size The
VDust Plus sensor
cleaning liquid and
Vswabs® allow removing
most of wet contamination
stains (water and oil)
from any digital camera
sensor. EZ SwabLight Kit
Vdust Plus Green Vswabs
contains: VDust Plus
cleaning liquid (1.15 ml)
Ultra MXD-100 sensor
cleaning swabs — Vswabs
(size specific, 4 per
pack) SwabLight
Availability: In Stock
£39.00
Available
-
Sensor Swabs are designed
for cleaning CCD chips
and other delicate or
hard to reach optical and
imaging surfaces. Clean
room manufactured and
sealed, these swabs are
the ultimate in purity.
Although these items are
not officially approved
by Nikon* or Canon*,
several digital imaging
site message boards have
threads discussing the
need for cleaning these
cameras, and the success
with using these
products. Read all
instructions first and
call us if you have
questions - before
proceeding. When used as
directed these products
are easy to use and safe
and yield excellent
results! Please see below
to find the correct
Sensor Swab for your
camera. *For details on
which type of sensor
swabs you need for your
camera click here
Availability: In Stock
£36.62
Available
-
Visible Dust EZ SwabLight
Kit Vdust Plus Orange
Vswabs - 1.0x (24 mm Full
frame) Swab Size The
VDust Plus sensor
cleaning liquid and
Vswabs allow removing
most of wet contamination
stains (water and oil)
from any digital camera
sensor. EZ SwabLight Kit
Vdust Plus Green Vswabs
contains: VDust Plus
cleaning liquid (1.15 ml)
DHAP Orange sensor
cleaning swabs — Vswabs
(size specific, 4 per
pack) SwabLight
Availability: In Stock
£39.00
Available
-
These swabs, with their
unique fabric folding
system, are specially
tailored for cleaning
your delicate sensor
without leaving streaks,
pooling or abrasions. 12
per pack.
Compatible with: *
VDust Plus™ *
Sensor Clean™ *
Smear Away™ The
patented mini-channel,
with contour, provides
an even saturation of the
paddles surface while
preventing pooling and
vertical flow at the
edge. This reduces
streaks associated with
traditional flat surface
paddles. The
mini-channels also
provide the extra
reservoir to absorb the
excessive liquid and
prolonging the moisture
life of the swab during
the cleaning process.
Cautionary Note
Visibledust sensor
cleaning solutions and
swabs are calibrated to
work together to produce
optimal and safe results.
Please DO NOT USE
alternative solutions
with our swab. A simple
grain of quartz which is
found in cheaper
solutions are enough to
produce an expensive
scratch on the low pass
filter. Our solutions are
manufactured to the
highest standard of
quality that is practiced
in pharmaceutical
industries. Visibledust
solutions are calibrated
for NORMAL evaporative
rates: 1. to keep
the swab moist at all
time to reduce the risk
of scratch 2. to
increase the cleaning
power, less swabbing
more economical 3.
to reduce friction by
being moist all time
during swabbing The
potential risk of FAST
evaporative solutions
used as sensor cleaning
are the following:
1. an increase in the
risk of damage and stress
to sensor coating by
using premature dry swab
2. a great reduction
in cleaning power by
shortening the contact
time between contaminants
and solution due to the
increased evaporation
rate of the solution
3. increase in friction
by using a premature
drying swab, resulting
in static charge build up
leading to an even
greater dust accumulation
on the sensor Our
cleaning liquids are
intended to be placed on
the swab first, so the
concern for liquid
seeping through the
sensor is not valid or
accurate. On the other
hand, the disadvantages
of a generic brand or
FAST evaporative liquid
used for sensor cleaning
may in fact may casue
damage to the sensor by
requiring repeat swabbing
and is not recommended.
Availability: In Stock
£40.00
Available
-
Visible Dust EZ SwabLight
Kit Sensor Clean Green
Vswabs - 1.6x (16 mm
Cropped Sensor) Swab Size
The VDust Plus sensor
cleaning liquid and
Vswabs allow removing
most of wet contamination
stains (water and oil)
from any digital camera
sensor. EZ SwabLight Kit
Vdust Plus Green Vswabs
contains: Sensor Clean
cleaning liquid (1.15 ml)
Ultra MXD-100 sensor
cleaning swabs — Vswabs
(size specific, 4 per
pack) SwabLight
Availability: In Stock
£39.00
Available
-
Visible Dust EZ Sensor
Cleaning Kit DUALPOWER-X
Extra Strength - 1.6x (16
mm Cropped Sensor) Swab
Size Enhancements: More
versatile than single
liquid Switching liquids
enhances cleaning Better
value than single liquid
Easier to remove tough
stain Most current sensor
technology utilizes water
repellent hydrophobic
coating to reduce stain
mark. Vdust Plus is an
excellent alcohol based
cleaning solution with
fast evaporating quality
ideal for removal of
water stain, compatible
with hydrophobic sensor
coating. However,
alcohol has poor cleaning
quality for most common
type of stains such as
heavy lubricant and tough
organic materials. In the
other hand, Smear Away
is the most powerful
cleaning solution to
remove and dissolve even
the toughest stains from
the sensor surface. Since
it is water based slight
over saturation of the
swab creates streaks due
to the hydrophobic nature
of sensor coating. With
dual power, if any
streaks appears due to
Smear Away, either
reduce over-saturation of
the swab by using less
liquid, allow more
evaporation time or
simply use Vdust Plus
with a new swab to remove
water streaks. Since
simple visual inspection
can not determine the
nature of stain light or
heavy, first start with
either liquid, if stain
is removed, Stop.
Otherwise switch liquid,
use a new swab proceed
with cleaning. Do not add
two liquids on the same
swab. Use each liquid
with separate swab.
Always swab in the same
direction. Smear Away
strong anti fog
capability, very strong
anti static capability,
removes smear on first
swipe, anti scratch
components prevents
contaminants from
scratching the sensor
while cleaning, very
strong oil and lubricant
remover, removes the
toughest stain, non
flammable, non
alcoholic, pollen
remover, best used with
Ultra MXD-100 green
Vswab. VDust Plus multi
ingradient, Iso
alcoholic solution,
removes oil fast,
evaporates fast, streak
free motion compatible
with both DHAP orange and
Ultra MXD-100 green
Vswab. Green MXD-100
Vswab patented V shape
results best
maneuverability inside
chamber, V shape results
in homogeneous motion,
it cleans corner the best
due to its V shape,
compatible with all three
solutions, multi fabric
ensures best results for
oil and smear removal,
its soft texture is safe
on coated sensor, best
used for fluorine coated
sensor, streak free
motion. This Kit
includes: Green Vswabs
size specific (5 per
pack) Liquid cleaner
Smear Away (1.15 ml)
Liquid cleaner VDust Plus
(1.15 ml)
Availability: In Stock
£25.00
Available
-
Visible Dust EZ SwabLight
Kit Vdust Plus Green
Vswabs - 1.6x (16 mm
Cropped Sensor) Swab Size
The VDust Plus sensor
cleaning liquid and
Vswabs® allow removing
most of wet contamination
stains (water and oil)
from any digital camera
sensor. EZ SwabLight Kit
Vdust Plus Green Vswabs
contains: VDust Plus
cleaning liquid (1.15 ml)
Ultra MXD-100 sensor
cleaning swabs — Vswabs
(size specific, 4 per
pack) SwabLight
Availability: In Stock
£39.00
Available
-
Visible Dust EZ
Corner2Corner Extra
Strength Kit - 1.6x (16
mm Cropped Sensor) Swab
Size Enhancements: More
versatile than single
liquid Switching liquids
enhances cleaning Better
value than single liquid
Easier to remove tough
stain Most current sensor
technology utilizes water
repellent hydrophobic
coating to reduce stain
mark. Vdust Plus is an
excellent alcohol based
cleaning solution with
fast evaporating quality
ideal for removal of
water stain, compatible
with hydrophobic sensor
coating. However,
alcohol has poor cleaning
quality for most common
type of stains such as
heavy lubricant and tough
organic materials. In the
other hand, Smear
Away™ is the most
powerful cleaning
solution to remove and
dissolve even the
toughest stains from the
sensor surface. Since it
is water based slight
over saturation of the
swab creates streaks due
to the hydrophobic nature
of sensor coating. With
dual power, if any
streaks appears due to
Smear Away, either
reduce over-saturation of
the swab by using less
liquid, allow more
evaporation time or
simply use Vdust Plus
with a new swab to remove
water streaks. Since
simple visual inspection
can not determine the
nature of stain light or
heavy, first start with
either liquid, if stain
is removed, Stop.
Otherwise switch liquid,
use a new swab proceed
with cleaning. Do not add
two liquids on the same
swab. Use each liquid
with separate swab.
Always swab in the same
direction. Smear Away
strong anti fog
capability, very strong
anti static capability,
removes smear on first
swipe, anti scratch
components prevents
contaminants from
scratching the sensor
while cleaning, very
strong oil and lubricant
remover, removes the
toughest stain, non
flammable, non
alcoholic, pollen
remover, best used with
Ultra MXD-100 green
Vswab. VDust Plus multi
ingradient, Iso
alcoholic solution,
removes oil fast,
evaporates fast, streak
free motion compatible
with both DHAP orange and
Ultra MXD-100 green
Vswab. Green MXD-100
Vswab patented V shape
results best
maneuverability inside
chamber, V shape results
in homogeneous motion,
it cleans corner the best
due to its V shape,
compatible with all three
solutions, multi fabric
ensures best results for
oil and smear removal,
its soft texture is safe
on coated sensor, best
used for fluorine coated
sensor, streak free
motion. Green MXD-100
Corner Swabs have been
tailored specifically to
remove dust build up in
those «hard to reach»
areas. Compatible with
our full arsenal of wet
cleaning solutions,
these swabs were
specifically fabricated
for cleaning the corners.
Usage Use regular Vswab
to clean the sensor. If
the contamination persist
at corners and edges,
use Corner Swab as
directed. Use each face
once. This Kit includes:
Green MXD-100 Vswabs size
specific (9 per pack)
Green MXD-100 Corner
Swabs (3 per pack) Liquid
cleaner Smear Away 1.15
ml (1) Liquid cleaner
VDust Plus 1.15 ml (1)
Availability: In Stock
£44.00
Available
-
These swabs, with their
unique fabric folding
system, are specially
tailored for cleaning
your delicate sensor
without leaving streaks,
pooling or abrasions. 12
per pack.
Compatible with: *
VDust Plus™ *
Sensor Clean™ *
Smear Away™ The
patented mini-channel,
with contour, provides
an even saturation of the
paddles surface while
preventing pooling and
vertical flow at the
edge. This reduces
streaks associated with
traditional flat surface
paddles. The
mini-channels also
provide the extra
reservoir to absorb the
excessive liquid and
prolonging the moisture
life of the swab during
the cleaning process.
Cautionary Note
Visibledust sensor
cleaning solutions and
swabs are calibrated to
work together to produce
optimal and safe results.
Please DO NOT USE
alternative solutions
with our swab. A simple
grain of quartz which is
found in cheaper
solutions are enough to
produce an expensive
scratch on the low pass
filter. Our solutions are
manufactured to the
highest standard of
quality that is practiced
in pharmaceutical
industries. Visibledust
solutions are calibrated
for NORMAL evaporative
rates: 1. to keep
the swab moist at all
time to reduce the risk
of scratch 2. to
increase the cleaning
power, less swabbing
more economical 3.
to reduce friction by
being moist all time
during swabbing The
potential risk of FAST
evaporative solutions
used as sensor cleaning
are the following:
1. an increase in the
risk of damage and stress
to sensor coating by
using premature dry swab
2. a great reduction
in cleaning power by
shortening the contact
time between contaminants
and solution due to the
increased evaporation
rate of the solution
3. increase in friction
by using a premature
drying swab, resulting
in static charge build up
leading to an even
greater dust accumulation
on the sensor Our
cleaning liquids are
intended to be placed on
the swab first, so the
concern for liquid
seeping through the
sensor is not valid or
accurate. On the other
hand, the disadvantages
of a generic brand or
FAST evaporative liquid
used for sensor cleaning
may in fact may casue
damage to the sensor by
requiring repeat swabbing
and is not recommended.
Availability: In Stock
£40.00
Available
-
Visible Dust EZ
Corner2Corner Light
Cleaning Kit - 1.6x (16
mm Cropped Sensor) Swab
Size Enhancements: Better
value than single liquid
EZ sensor cleaning VDust
Plus multi ingradient,
Iso alcoholic solution,
removes oil fast,
evaporates fast,
excellent for cleaning
mirror with DHAP orange
swab, streak free
motion, best used with
DHAP Orange swab
excellent to be used on
fluorine coated sensor.
Orange DHAP Vswab
patented V shape results
best maneuverability
inside chamber, used in
high end industrial optic
cleaning such as space
optical lenses, woven
fabric prevents
scratches, holds liquid
the best, thin and
extremely soft, only
compatible with VDust
Plus solution, streak
free motion of the swab
is due to its patented
Vshape, reaches the
corner best, excellent
for mirror cleaning when
used with VDust Plus,
not compatible with
sensor clean or smear
away. Orange DHAP Corner
Swabs™ have been
tailored specifically to
remove dust build up in
those «hard to reach»
areas. Only compatible
with VDust Plus™,
these swabs were
specifically fabricated
for cleaning the corners.
Usage Use regular Vswab®
to clean the sensor. If
the contamination persist
at corners and edges,
use Corner Swab™ as
directed. Use each face
once. This Kit includes:
Orange DHAP Vswabs size
specific (9 per pack)
Orange DHAP Corner Swabs
(3 per pack) Liquid
cleaner VDust Plus 1.15
ml (2)
Availability: In Stock
£44.00
Available
-
Green Clean SC-4000
Sensor Cleaning Kit -
Full Frame Size Removes
all forms of
contamination: loose
forms are lifted off,
grimy forms are dissolved
/ dry polishing. Quick
facts: Safe process due
to contact- and
residue-free application
No compression and
transportation of dirt
particles No direct gas
contact High performance
suction action guarantees
gentle lifting off of the
loose particles, even
when confronted with the
resistance of the static
charging inside the
camera Economical: In
fact the main percentage
of contamination is loose
and can therefore be
removed with the MINI
Vacuum HI TECH
pressurized gas is
especially strong,
stable productive thus
resulting in the most
economical method of
sensor cleaning.
Effective as the dust is
removed from the camera
shaft and the objective
Availability: In Stock
£60.00
Available
-
Visible Dust Quasar Plus
Sensor Loupe 7X Quasar
Plus Sensor Loupe 7x is
an improvement to Quasar
Sensor Loupe 7x. Quasar
Plus comes with a 52 mm
metal ring to attach
filters and close-up
lenses for higher
contrast and
magnification. For
example, using amber
filter effectively blocks
blue light increasing the
contrast and reducing the
glare accompanied with
sharper image and less
strain to the eyes. Blue
light blockers are ideal
for low vision users. The
attachment of UV filters
can enhance image
clarityand protecting the
ED glass lens. The
attachment of polarized
filter can be helpful in
distinguishing stain from
dust. The filter ring in
Quasar Plus allows the
attachment of various
hoods for a glare free
image when used outside
in the bright daylight.
The metal filter rings
allows a connection to
various camera lens
system via connector tube
for creative photography.
The Bright Vue technology
used in Quasar Plus uses
6 (Patented) super
bright LED with
vari-angled orientation
designed specifically to
create 3D/ image to
identify the smallest
spots with the highest
resolution. The ED
(Extra-Low
Dispersion)glass with
Fluorine coated (MgF2)
lens allows for reducing
chromatic aberration and
sharper image. The ED
Glass (Extra-Low
Dispersion) lens in
Quasar Plus has been
lowered for a better and
improved focusing system
for sensors placed in
deeper cavity. Overall,
the new Quasar Plus is a
more versatile tool in
creative photography with
additional functionality:
Improved Focusing System
for sensor placed in
deeper cavity Identifies
Smallest Spots on Sensor
Extra-low Dispersion
glass lens Six super
bright LED Lights /
Vari-Angled Orientation
Bright Vue technology
Creates 3D Image of Dust
Particles Fluorine Coated
/ High Resolution Reduces
Chromatic Aberration Can
be used for Inspecting
Negatives Easy On/Off
Operation Includes Two
Lithium Batteries and
hard Case
Availability: In Stock
£115.00
Available
-
Visible Dust EZ
Corner2Corner Extra
Strength Kit - 1.0x (24
mm Full frame) Swab Size
Enhancements: More
versatile than single
liquid Switching liquids
enhances cleaning Better
value than single liquid
Easier to remove tough
stain Most current sensor
technology utilizes water
repellent hydrophobic
coating to reduce stain
mark. Vdust Plus is an
excellent alcohol based
cleaning solution with
fast evaporating quality
ideal for removal of
water stain, compatible
with hydrophobic sensor
coating. However,
alcohol has poor cleaning
quality for most common
type of stains such as
heavy lubricant and tough
organic materials. In the
other hand, Smear
Away™ is the most
powerful cleaning
solution to remove and
dissolve even the
toughest stains from the
sensor surface. Since it
is water based slight
over saturation of the
swab creates streaks due
to the hydrophobic nature
of sensor coating. With
dual power, if any
streaks appears due to
Smear Away, either
reduce over-saturation of
the swab by using less
liquid, allow more
evaporation time or
simply use Vdust Plus
with a new swab to remove
water streaks. Since
simple visual inspection
can not determine the
nature of stain light or
heavy, first start with
either liquid, if stain
is removed, Stop.
Otherwise switch liquid,
use a new swab proceed
with cleaning. Do not add
two liquids on the same
swab. Use each liquid
with separate swab.
Always swab in the same
direction. Smear Away
strong anti fog
capability, very strong
anti static capability,
removes smear on first
swipe, anti scratch
components prevents
contaminants from
scratching the sensor
while cleaning, very
strong oil and lubricant
remover, removes the
toughest stain, non
flammable, non
alcoholic, pollen
remover, best used with
Ultra MXD-100 green
Vswab. VDust Plus multi
ingradient, Iso
alcoholic solution,
removes oil fast,
evaporates fast, streak
free motion compatible
with both DHAP orange and
Ultra MXD-100 green
Vswab. Green MXD-100
Vswab patented V shape
results best
maneuverability inside
chamber, V shape results
in homogeneous motion,
it cleans corner the best
due to its V shape,
compatible with all three
solutions, multi fabric
ensures best results for
oil and smear removal,
its soft texture is safe
on coated sensor, best
used for fluorine coated
sensor, streak free
motion. Green MXD-100
Corner Swabs have been
tailored specifically to
remove dust build up in
those «hard to reach»
areas. Compatible with
our full arsenal of wet
cleaning solutions,
these swabs were
specifically fabricated
for cleaning the corners.
Usage Use regular Vswab
to clean the sensor. If
the contamination persist
at corners and edges,
use Corner Swab as
directed. Use each face
once. This Kit includes:
Green MXD-100 Vswabs size
specific (9 per pack)
Green MXD-100 Corner
Swabs (3 per pack) Liquid
cleaner Smear Away 1.15
ml (1) Liquid cleaner
VDust Plus 1.15 ml (1)
Availability: In Stock
£44.00
Available
-
Sensor Swabs™ are
designed for cleaning CCD
chips and other delicate
or hard to reach optical
and imaging surfaces.
Clean room manufactured
and sealed, these swabs
are the ultimate in
purity. Sensor Swabs must
be used with Eclipse or
E2 Cleaning Fluid,
available separately Size
Three for Canon 1Ds MK
1/2/3 5D, Nikon D3,
Kodak SLR c/n Fullframe
Cameras
Availability: In Stock
£36.62
Available
-
These new DSLR swabs from
Just Ltd, are clean room
manufactured using
extremely soft and highly
absorbent lint-free
micro-fibre cloth, to
produce a superior
cleaning action. 17mm
Swab width suitable Canon
D30, D60, 10D, 20D,
30D, 40D, 300D, 350D,
400D, 450D, 1000D,
Nikon D100, D1X, D70,
D80, D40, D40x, D50,
D60, Pentax, Samsung,
Sony
Availability: In Stock
£26.95
Available
-
These new DSLR swabs from
Just Ltd, are clean room
manufactured using
extremely soft and highly
absorbent lint-free
micro-fibre cloth, to
produce a superior
cleaning action. 14mm
Swab width suitable for
Olympus and Panasonic
4/3" Sensors. Also useful
for cleaning the corners
of Full-Frame sensors.
Availability: In Stock
£26.95
Available
-
Visible Dust EZ
Corner2Corner Regular
Strength Kit - 1.0x (24
mm Full frame) Swab Size
Enhancements: More
versatile than single
liquid Switching liquids
enhances cleaning Better
value than single liquid
Easier to remove tough
stain Most current
sensor technology
utilizes water repellent
hydrophobic coating to
reduce stain mark. Vdust
Plus is an excellent
alcohol based cleaning
solution with fast
evaporating quality ideal
for removal of water
stain, compatible with
hydrophobic sensor
coating. However,
alcohol has poor cleaning
quality for most common
type of stains such as
saliva and organic
materials. In the other
hand, Sensor Clean is an
excellent cleaning
solution powerful enough
to remove organic and
saliva stains but is
water based. Since simple
visual inspection can not
determine the nature of
stain light or heavy,
first start with either
liquid, if stain is
removed, Stop. Otherwise
switch liquid, use a new
swab proceed with
cleaning. Do not add two
liquids on the same swab.
Use each liquid with
separate swab. Always
swab in the same
direction. Sensor Clean
has many characteristics
that make it an excellent
choice for cleaning your
sensor. While it is best
used on water based
stains and light dust
contamination, it also
provides excellent dust
repellent properties and
anti-fogging
capabilities. Sensor
Clean works best with
VisibleDust MXD-100 Green
Series Swabs. VDust Plus
multi ingradient, Iso
alcoholic solution,
removes oil fast,
evaporates fast, streak
free motion compatible
with both DHAP orange and
Ultra MXD-100 green
Vswab. Green MXD-100
Vswab patented V shape
results best
maneuverability inside
chamber, V shape results
in homogeneous motion,
it cleans corner the best
due to its V shape,
compatible with all three
solutions, multi fabric
ensures best results for
oil and smear removal,
its soft texture is safe
on coated sensor, best
used for fluorine coated
sensor, streak free
motion. Green MXD-100
Corner Swabs have been
tailored specifically to
remove dust build up in
those «hard to reach»
areas. Compatible with
our full arsenal of wet
cleaning solutions,
these swabs were
specifically fabricated
for cleaning the corners.
Usage Use regular Vswab
to clean the sensor. If
the contamination persist
at corners and edges,
use Corner Swab as
directed. Use each face
once. This Kit includes:
Green MXD-100 Vswabs size
specific (9 per pack)
Green MXD-100 Corner
Swabs (3 per pack) Liquid
cleaner Sensor Clean 1.15
ml (1) Liquid cleaner
VDust Plus 1.15 ml (1)
Availability: In Stock
£44.00
Available
-
These new DSLR swabs from
Just Ltd, are clean room
manufactured using
extremely soft and highly
absorbent lint-free
micro-fibre cloth, to
produce a superior
cleaning action. 20mm
Swab width suitable Canon
EOS 1D Mk I, II, II,
Fuji S1, S2, S3 S5,
Kodak DCS 620, 760,
Leica M8, Module R,
Nikon D2X, D200, D300,
Sigma SD9, SD10
Availability: In Stock
£26.95
Available
-
These new DSLR swabs from
Just Ltd, are clean room
manufactured using
extremely soft and highly
absorbent lint-free
micro-fibre cloth, to
produce a superior
cleaning action. 24mm
Swab width suitable Canon
EOS 1Ds Mk I, II, II,
Contax N Digital, Kodak
SLRn, SLRc, 14N, Nikon
D3, D700
Availability: In Stock
£26.95
Available
-
These swabs, with their
unique fabric folding
system, are specially
tailored for cleaning
your delicate sensor
without leaving streaks,
pooling or abrasions. 12
per pack.
Compatible with: *
VDust Plus™ *
Sensor Clean™ *
Smear Away™ The
patented mini-channel,
with contour, provides
an even saturation of the
paddles surface while
preventing pooling and
vertical flow at the
edge. This reduces
streaks associated with
traditional flat surface
paddles. The
mini-channels also
provide the extra
reservoir to absorb the
excessive liquid and
prolonging the moisture
life of the swab during
the cleaning process.
Cautionary Note
Visibledust sensor
cleaning solutions and
swabs are calibrated to
work together to produce
optimal and safe results.
Please DO NOT USE
alternative solutions
with our swab. A simple
grain of quartz which is
found in cheaper
solutions are enough to
produce an expensive
scratch on the low pass
filter. Our solutions are
manufactured to the
highest standard of
quality that is practiced
in pharmaceutical
industries. Visibledust
solutions are calibrated
for NORMAL evaporative
rates: 1. to keep
the swab moist at all
time to reduce the risk
of scratch 2. to
increase the cleaning
power, less swabbing
more economical 3.
to reduce friction by
being moist all time
during swabbing The
potential risk of FAST
evaporative solutions
used as sensor cleaning
are the following:
1. an increase in the
risk of damage and stress
to sensor coating by
using premature dry swab
2. a great reduction
in cleaning power by
shortening the contact
time between contaminants
and solution due to the
increased evaporation
rate of the solution
3. increase in friction
by using a premature
drying swab, resulting
in static charge build up
leading to an even
greater dust accumulation
on the sensor Our
cleaning liquids are
intended to be placed on
the swab first, so the
concern for liquid
seeping through the
sensor is not valid or
accurate. On the other
hand, the disadvantages
of a generic brand or
FAST evaporative liquid
used for sensor cleaning
may in fact may casue
damage to the sensor by
requiring repeat swabbing
and is not recommended.
Availability: In Stock
£40.00
Available
-
The Kenair Dust Vac
Kit is supplied with a
360ml cartridge of
Kenair, Re-usable Kenair
Actuator Valve and Dust
Vac Attatchment. Kenair
is used to blow dust,
fluff or other unwanted
small particles from all
types of precision
equipment. Emitting a
powerful jet it is used
extensively in the
photographic, movie,
computer, electronics and
general servicing
industries. Kenair is
used in standard “
blowing mode” with the
Standard Actuator Valve
which is provided with
the kit. Also included is
the Dust Vac attatchment.
This is fitted within
seconds onto the Actuator
valve and converts it to
highly effective Vaccum
mode. This will vaccum
off dust and other small
particles and is
particularly useful in
applications where Air
Dusters are not
recommended, for example
in Digital Camera
applications. The Dust
Vac attatchment is
supplied with a soft
ended 50cm pick up tube.
Kenair is a safe dry
gas CFC and HCFC free
and complies with all EC
regulations. When the
Kenair Cartridge is
finished, replace with a
spare cartridge code
KENRO02
Availability: In Stock
£26.34
Available
-
If you are unsure as to
the nature of your stain
or you get both water and
lubricant stains, VDust
Plus™ will fit the bill
perfectly. Designed to
clean away water and most
oil stains, VDust
Plus™ eliminates
streaking and provides a
moderate static barrier.
VisibleDust liquid
cleaners (Sesnor Clean,
VDust Plus and Smear
Away) when used with
VisibleDust Sensor
Cleaning swabs are safe
and effective on ALL
DSLR's including: Neweer
Canon DSLRs, such as the
400D, 40D, 1D MK III
and the 2Ds MK III,
newer Nikon - D300 and D3
and the Sony Alpha 700.
All VisibleDust solutions
are safe on ITO and non
ITO coated sensors
Cautionary Note:
Visibledust sensor
cleaning solutions and
swabs are calibrated to
work together to produce
optimal and safe results.
Please DO NOT USE
alternative solutions
with our swab. A simple
grain of quartz which is
found in cheaper
solutions are enough to
produce an expensive
scratch on the low pass
filter. VisibleDust
solutions are
manufactured to the
highest standard of
quality that is practiced
in pharmaceutical
industries. Visibledust
solutions are calibrated
for NORMAL evaporative
rates: to keep the swab
moist at all time to
reduce the risk of
scratch to increase the
cleaning power, less
swabbing more economical
to reduce friction by
being moist all time
during swabbing The
potential risk of FAST
evaporative solutions
used as sensor cleaning
are the following: an
increase in the risk of
damage and stress to
sensor coating by using
premature dry swab a
great reduction in
cleaning power by
shortening the contact
time between contaminants
and solution due to the
increased evaporation
rate of the solution
increase in friction by
using a premature drying
swab, resulting in
static charge build up
leading to an even
greater dust accumulation
on the sensor Visibledust
cleaning liquids are
intended to be placed on
the swab first, so the
concern for liquid
seeping through the
sensor is not valid or
accurate. On the other
hand, the disadvantages
of a generic brand or
FAST evaporative liquid
used for sensor cleaning
may in fact may casue
damage to the sensor by
requiring repeat swabbing
and is not recommended.
Availability: In Stock
£20.99
Available
-
Specifically formulated
to be used in conjunction
with any brush with SCF
technology, whether it
is the Arctic Butterfly®
or any of our Sensor
Brushes™. Sensor
Brush™ Clean is pH
buffered to avoid extreme
acidity or alkalinity so
as to not affect the
existing charges on the
brush while safely
cleaning any residual
debris.
Availability: In Stock
£13.00
Available
-
As an extra replacement
brush for use with the
Arctic Butterfly™ the
HDF Sensor Brush™ has
been designed for extreme
dusting. With its high
density fiber
construction, this new
accessory has twice the
amount of fibers then the
original Arctic
Butterfly™ attachment
brush. The HDF Sensor
Brush™ is best used in
excessively dusty
situations. Includes a
convenient carrying case
for safe keeping.
Availability: In Stock
£40.00
Available
-
Anti Static Property -
*Silicon-RX is a unique
compound used in
construction of ZEEION®
blower to produce an anti
static property. Unlike
ordinary blowers made
from regular rubber that
increase static charges,
the ZEEION® blower
allows an opposite
charges of an air
molecules to be blown at
dust and sensor surface,
therefore neutralizing
the static charges for an
easier and more efficient
dust removal system. This
advanced feature reduces
the dust re-attachment to
the surface by
neutralizing the surface
static charges. Dust Free
Ejection - *One -Way
Valve at front end of the
ZEEION® blower prevents
dust intake during
expansion from nozzle.
Therefore, the intake of
the air occurs from the
back end far from
contamination source.
This results in ejecting
cleaner air back to the
surface unlike the
ordinary blower that
sucks in the dust from
front nozzle close to
contamination source
during expansion.
Projectile Free -
*Filters are placed at
less than 20 microns size
at both ends to prevent
intake of particles such
as sands and quartz found
in everyday environment,
resulting in a particle
free air ejection. This
feature eliminates
creating projectiles and
the chance of producing
nicks and cuts on the
sensor when blown
forcefully at them
usually seen by using
ordinary blowers. *Soft
cap safety is placed in
front of the nozzle to
prevent accidental damage
in case of contact with
the sensor.
Availability: In Stock
£44.99
Available
-
If you have a stubborn
stain on your sensor that
won't go away then Smear
Away™ is your answer.
Specially formulated to
protect your sensor as it
cleans away oil and grit,
Smear Away™ also
provides an anti-static
barrier to reduce further
contamination. It is
recommended to use Smear
Away™ with VisibleDust
MXD-100 (green) Sensor
Swabs. All of visibleDust
solutions are safe on ITO
and non ITO coated
sensors. VisibleDust
liquid cleaners (Sensor
Clean, VDust Plus and
Smear Away) when used
with visibleDust Sensor
Cleaning swabs are safe
and effective on ALL
DSLRs including newer
Canon DSLRs, such as the
400D, 40D, 1D MK III
and 1Ds MK III, newer
Nikon DSLRs the D300 and
D3 and the Sony Alpha 700
Cautionary Note:
Visibledust sensor
cleaning solutions and
swabs are calibrated to
work together to produce
optimal and safe results.
Please DO NOT USE
alternative solutions
with our swab. A simple
grain of quartz which is
found in cheaper
solutions are enough to
produce an expensive
scratch on the low pass
filter. VisibleDust
solutions are
manufactured to the
highest standard of
quality that is practiced
in pharmaceutical
industries. Visibledust
solutions are calibrated
for NORMAL evaporative
rates: to keep the swab
moist at all time to
reduce the risk of
scratch to increase the
cleaning power, less
swabbing more economical
to reduce friction by
being moist all time
during swabbing The
potential risk of FAST
evaporative solutions
used as sensor cleaning
are the following: an
increase in the risk of
damage and stress to
sensor coating by using
premature dry swab a
great reduction in
cleaning power by
shortening the contact
time between contaminants
and solution due to the
increased evaporation
rate of the solution
increase in friction by
using a premature drying
swab, resulting in
static charge build up
leading to an even
greater dust accumulation
on the sensor VisibleDust
cleaning liquids are
intended to be placed on
the swab first, so the
concern for liquid
seeping through the
sensor is not valid or
accurate. On the other
hand, the disadvantages
of a generic brand or
FAST evaporative liquid
used for sensor cleaning
may in fact may casue
damage to the sensor by
requiring repeat swabbing
and is not recommended.
Availability: In Stock
£20.99
Available
-
Lens Clean™ is
distinctly prepared to
safely remove finger
prints and water/oil
based contamination from
optical surfaces without
streaking. Most Lens
cleaning solutions are
alcohol based. Alcohol by
itself is not suitable
for remove stains/spots
and may leave streaks
behind. Use Lens Clean™
with VisibleDust
micro-fiber Magic Cleaner
or other lint-free cloth.
This 30ml size lens
cleaner is conveniently
portable.
Availability: In Stock
£16.00
Denmark